Publikationen

Vorträge

Weißensteiner I:
Challenges in maintaining the formability of novel Aluminium alloys, 28th International Conference on Plasticity, Damage and Fracture, Panama City, 2024

Antrekowitsch J.:
ZERO WASTE PROCESSING OF ZINC CONTAINING SLAGS FROM LEAD INDUSTRY, Plenary Speaker, 9th Intl. Symp. on Sustainable Materials Recycling Processes & Products, Panama City, 2023

Antrekowitsch J.:
Recycling of Nonferrous Metals, an important contribution to the raw materials supply chain. International Technical Meeting, Böhler, May 2023, Leoben

Antrekowitsch J.:
Hydrogen, a Promising Carbon Substitute in Metallurgy? Keynote Speaker, Advances in Pyrometallurgy – Developing Low Carbon Pathways, TMS Annual Meeting, San Diego 2023

Antrekowitsch J.:
Future processing of by-products from mining and metallurgy considering zero waste and zero CO2 strategies. Invited Speaker, SynerGEM Seminar Series, USGS, Washington 2023

Antrekowitsch J.:
Zinc Recycling Research. Zinc Experts Meeting, GDMB, Plovdiv, 2023

Aster P.:
Clustering upon deformation in age-hardenable Al-alloys. Seminar on clustering and precipitation in aluminum alloys, Orkanger, Norwegen, 2023

Aster P.:
Effect of deformation on cluster evolution in age-hardenable aluminum alloys. Light Metals Expert Meeting, Hamburg, Deutschland, 2023

Büchner K.:
Investigation of the influence of different parameters on the pyrolysis of coated aluminium scrap by thermogravimetry and optical evaluation, EMC 2023, Düsseldorf, Deutschland, 2023

Gerold E., Lerchbammer R. und H. Antrekowitsch:
SeLiReco 2.0 – A more sustainable process for the recycling of lithium-ion batteries. EMC 2023, Düsseldorf, Deutschland, 2023

Hanke G.
Optimization of Biocoke for its Use in Metallurgy, 6th Intl. Symp. on Sustainable Carbon and Biocoke and their Industrial Application, SIPS, Panama City, 2023

Hanke G.
Future processing of by-products from mining and metallurgy considering zero waste and zero CO2 strategies. Invited Speaker, SynerGEM Seminar Series, USGS, Washington 2023

Lerchbammer R., Gerold E. und H. Antrekowitsch:
Gluconic Acid Leaching of Spent Lithium-Ion Batteries as an Environmentally Approach to Achieve High Leaching Efficiencies in the Recycling of NMC Active Material. Metal, 13 (2023, 1330)

Lerchbammer R., Gerold E. und H. Antrekowitsch
Organic acids and their crucial role in establishing a sustainable process route in the recycling of lithium-ion batteries, EMC European Metallurgical Conference 2023, Düsseldorf, Deutschland, 2023

Lerchbammer R.: 
Beitrag der Hydrometallurgie zu einer nachhaltigen Kreislaufwirtschaft in der Elektromobilität, 23. Österreichischer Klimatag, Leoben, Österreich, 2023

Lerchbammer R.: 
Konzeptionierung von Methoden zur Rückgewinnung von kritischen Elementen aus verbrauchten Lithium-Ionen-Batterien, GDMB Fachausschuss für Sondermetalle, Wimsheim, Deutschland, 2022

Luznik L.
Recycling von Hartmetallen mittels Zink-Prozess. Fachausschuss für Sondermetalle, Freiberg, Deutschland, 2023

Luznik L., Gerold E., Luidold S., Weirather T., Pachlhofer J, Czettl C., Karhumaa T. und Antrekowitsch H.:
Recycling of cemented carbides with gaseous zinc including particular consideration of GGI. EMC 2023, Düsseldorf, Deutschland, 2023

Krall P:
Influence of cooling rates on new alloys from mixed automotive scraps. EMC 2023, Düsseldorf, Deutschland, 2023

Samberger S.:
Crossover alloying as additional trail to counter the upcoming scrap surplus. Light Metals Expert Meeting, Hamburg, Deutschland, 2023

Samberger S.:
Effect of Heating/Cooling-rates on the aging behaviour of Al alloys. EMC 2023, Düsseldorf, Deutschland, 2023

Scheiblehner D.:
Hydrogen Production by Methane Pyrolysis in molten ternary Alloys. EMC 2023, Düsseldorf, Deutschland, 2023

Tichy S.:
Effects of the atmosphere on melt quality and oxidation of aluminium magnesium melts. Light Metals Expert Meeting, Hamburg, Deutschland, 2023

Tichy S.:
Hydrogen Absorption of Aluminum-Magnesium Melts from Humid Atmospheres. TMS 2023, 152nd Annual Meeting & Exhibition, San Diego, USA, 2023

Tichy S.:
Comparison of experimental methods to investigate the oxidation behaviour of aluminium melts. EMC 2023, Düsseldorf, Deutschland, 2023

Trink B.:
Iron-rich intermetallic phases improving mechanical properties in Al-Mg-Si wrought alloys, THERMEC 2023 – International Conference on Processing & Manufacturing of Advanced Materials: Processing, Fabrication, Properties, Applications, Wien, Österreich, 2023

Weidinger A.:
Laboratory Direct Chill Casting – Accelerated sample production. Light Metals Expert Meeting, Hamburg, Deutschland, 2023

Weidinger A.:
Industry-oriented sample preparation with an inductively heated laboratory continuous casting plant for aluminum alloys. European Metallurgical Conference EMC, Düsseldorf, Deutschland, 2023

Weißensteiner I.:
Systematic evaluation of microstructural features influencing the bendability of Al alloys, THERMEC 2023 – International Conference on Processing & Manufacturing of Advanced Materials: Processing, Fabrication, Properties, Applications, Wien, Österreich, 2023

Weißensteiner I.:
Microstructural features and their influence on mechanical properties, THERMEC workshop on Aluminum Alloys, Wien, Österreich, 2023

Weißensteiner I.:
Systematic evaluation of microstructural features influencing the bendability of Al alloys, LightMAT 2023: 5th International Conference on Light Materials – Science and Technology, Trondheim, Norwegen, 2023

Weißensteiner I.:
Deformation Analysis in Novel Aluminum Alloys, European Metallurgical Conference EMC, Düsseldorf, Deutschland, 2023

Wibner S.:
Pilot Plant for Hydrogen and Carbon Production via Methane Pyrolysis. SIPS 2023, Veracruz, Panama, 2023

Witt K.:
Recent Recycling Developments For Spent Magnesia Chrome Refractories From Nonferrous Metal Production, 3rd EURECA-PRO Conference 2023, Chania, Griechenland

Wölfler C., Hanke G. und Antrekowitsch J.:
Modification of heavy metal containing slags for use as sand substitute in concrete. EMC 2023, Düsseldorf, Deutschland, 2023

Wölfler C., Hanke G. und Antrekowitsch J.:
The use of treated lead slag as a substitute for natural sand in concretes. Wastes2023, Coimbra, Portugal, 2023

Antrekowitsch H.:
Recycling von Nichteisenmetallen – ein wichtiger Beitrag zur Rohstoffversorgung in Europa. Forum für Metallurgie und Werkstofftechnik, Leoben, Österreich, 2022

Antrekowitsch H.:
Recycling von Aluminium. 12. Ranshofener Leichtmetalltage, Salzburg, Österreich, 2022

Antrekowitsch J.:
Optimierung und Verwertung von Schlacken aus dem Recycling metallurgischer Nebenprodukte. Mineralische Nebenprodukte und Abfälle, Berlin, Deutschland, 2022

Antrekowitsch J.:
Efficient steel mill dust recycling – Aiming for a zero waste solution. Rewas 2022 – Developing tomorrow‘s technical cycles, San Diego, USA, 2022

Antrekowitsch J.:
Activities of the research group „Industrial by-product recycling“ in zinc metallurgy. International Zinc Experts Meeting, Linz, Austria, 2022

Antrekowitsch J.:
Reducing agents from biomass – an environmentally friendly solution for metallurgical processes, SIPS, Phuket, Thailand, 2022

Antrekowitsch J.:
Future potentials of the waelz technology as best available technology. 1st International zinc recycling conference, Nashville, USA, 2022

Antrekowitsch J.:
Application of special designed biochar in metallurgical processes. Seminar biochar for industry, online, 2022

Aster P.:
Effect of pre-aging and long-term aging on cluster hardening in Al-Mg-Si-(Cu) alloys. 18th International conference on aluminium alloys, Toyama, Japan, 2022

Aster P.:
Influence of cluster hardening on strength and strain hardening behavior of various aluminum alloys, TMS – 151st Annual meeting and Exhibition supplemental proceedings, Anaheim, Kalifornien, USA, 2022

Gerold E.:
Ist ihr Akku leer? – Chancen und Risiken des (Batterie)-Recyclings. TripleN – Nachhaltig ökologisch, Nachhaltig ökonomisch, Nachhaltig sozial, Onlinevortrag, 2022

Gerold E.:
Lithiumrecycling – Der Schatz im Schrott. 51. Metallurgisches Seminar der GDMB, Clausthal-Zellerfeld, Deutschland, 2022

Hanke G.:
Assessment of by-products from metal producing industry – Development of a certification procedure and case study “Dust from secondary copper industry”. SIPS, Phuket, Thailand, 2022

Hanke G.:
Maximizing the efficiency of by-product treatment by multi-metal recovery and slag valorization. TMS – 151st Annual meeting and Exhibition, Anaheim, Kalifornien, USA, 2022

Körbler N.:
Cyclic voltammetric analysis of copper dissolution in acidic chloride electrolytes containing copper ions. Copper Conference, Santiago, Chile, 2022

Krall P.:
New alloys from recycling of mixed automotive scraps. Materials Science and Engineering, Darmstadt, Deutschland, 2022

Krall P.:
New alloys from recycling of automotive scraps. 18th International conference on aluminium alloys, Toyama, Japan, 2022

Leuchtenmüller M.:
Prospect of hydrogen in electric arc furnace dust recycling. 52nd Metallurgical seminar of the GDMB, Gelsenkirchen, Deutschland, 2022

Neuschitzer D.:
Methane pyrolysis: Bridge technology for a CO2-neutral energy concept – Process technological development of a molten metal bubble column reactor. 52nd Metallurgical seminar of the GDMB, Gelsenkirchen, Deutschland, 2022

Neuschitzer D.: Technological process developments of molten metal reactors for methane pyrolysis. 1st Symposium on H2 and C, Leoben, Österreich, 2022

Pogatscher S.:
Strategies for future scrap-based sustainable aluminium alloys. 18th International conference on aluminium alloys, Toyama, Japan, 2022

Pogatscher S.:
In-situ experiments on aluminium alloys via atom probe tomography and transmission electron microscopy. Lehrstuhl Stahldesign, Montanuniverstität Leoben, Österreich, 2022

Pogatscher S.:
Sustainable aluminium alloys for automotive applications. NTNU Trondheim, Norwegen, 2022

Quick C.:
Calorimetric study of heat capacity during rapid processing. 18th International conference on aluminium alloys, Toyama, Japan, 2022

Samberger S.:
Crossover alloys for sheet forming operations. 18th International conference on aluminium alloys, Toyama, Japan, 2022

Scheiblehner D.:
Methane pyrolysis: Bridge technology for a CO2-neutral energy concept Investigation of molten catalytic alloys for a bubble column reactor. 52nd Metallurgical Seminar of the GDMB, Topic: Hydrogen in Metallurgy, Gelsenkirchen, Deutschland, 2022

Scheiblehner D.:
Methane pyrolysis: Bridge technology for a CO2-neutral energy concept Investigation of molten catalytic alloys for a bubble column reactor. 52nd Metallurgical seminar of the GDMB, Gelsenkirchen, Deutschland, 2022

Scheiblehner D.:
Investigations of catalytic alloy systems for the production of hydrogen from methane via pyrolysis in molten metal reactors. 1st Symposium on H2 and C, Leoben, Österreich, 2022

Steinlechner S.:
CO2-optimized recovery of special metals from precipitation residue by selective chlorination. 151st Annual Meeting and Exhibition of the Minerals, Metals and Materials Society, Anaheim, Kalifornien, USA, 2022

Trink B.:
Wrought Al-Mg-Si alloys with high Fe content enable attractive mechanical properties. 18th International conference on aluminium alloys, Toyama, Japan, 2022

Weißensteiner I.:
Effects of Fe and Mn on the formability of Al-Mg alloys. 18th International conference on aluminium alloys, Toyama, Japan, 2022

Wibner S.:
Processing of aluminium dross from the Al-recycling industry. Materials Science and Engineering, Darmstadt, Deutschland, 2022

Wibner S.:
Processing of dross from the aluminium industry. Light metals expert committee, Urspelt, Luxemburg, 2022

Willenshofer P.:
A novel ultrafine-grained crossover aluminium alloy with enhanced irradiaton resistance. 18th International conference on aluminium alloys, Toyama, Japan, 2022

Wölfler C.:
Treatment of metallurgical by-products for metal winning and use as construction material. GeoMin, Köln, Deutschland, 2022

Auer M.:
2sDR – the future solution for steel mill dust recycling. 11th European Metallurgical Conference, Salzburg, Österreich, Onlinevortrag, 2021

Dumitraschkewitz P.:
FDSC of AlCu. 5th Flash DSC Conference, Greifensee, Schweiz, Onlinevortrag, 2021

Dumitraschkewitz P.:
MEMS-based in situ electron-microscopy investigation of rapid solidification and heat treatment on eutectic Al-Cu. EUROMAT, Graz, Österreich, Onlinevortrag, 2021

Dumitraschkewitz P.:
MEMS-based in situ electron-microscopy investigation of rapid solidification and heat treatment on eutectic Al-Cu. 11th ASEM Workshop, Linz, Österreich, Onlinevortrag, 2021

Gerold E.:
Digital process planning tool of dross buildup-induced surface defect formation on galvanized steel sheets (DigiDross). GAP-Meeting, XXX, Onlinevortrag, 2021

Gerold E.:
Digital process planning tool of dross buildup-induced surface defect formation (DigiDross) (ZCO84+ZCO85). GAP-Meeting, XXX, Onlinevortrag, 2021

Gerold E.:
Lithiumrecycling – Rückgewinnung des weißen Golds der Zukunft. Fachausschuss Sondermetalle, Röthenbach an der Pegnitz, Deutschland, 2021

Gerold E.:
Decomposition of hydrogen peroxide in selected organic acid. 11th European Metallurgical Conference, Salzburg, Österreich, Onlinevortrag, 2021

Grasserbauer J.:
Microstructure and texture evolution in a 5xxx Al-alloys with varying amounts of Fe and Mn. Thermec, Wien, Österreich, Onlinevortrag, 2021

Grasserbauer J.:
Particle related texture and microstructure modifications in Al-Mg alloys with Fe and Mn additions. International Conference on textures of materials, Japan, Onlinevortrag, 2021

Leitner M.:
Contacting cobalt with vaporous zinc. 11th European Metallurgical Conference, Salzburg, Österreich, Onlinevortrag, 2021

Pogatscher S.:
Natural aging in aluminium alloys: A size-dependent effect?. Thermec, Wien, Österreich, Onlinevortrag, 2021

Pogatscher S.:
Phase Transitions in Metallic Systems far from Equilibrium. Seminar Series „Micro- and Nanomaterials“, Wien, Österreich, Onlinevortrag, 2021

Pogatscher S.:
Sustainable aluminium alloys for automotive applications. Sustainability in Materials Science and Engineering, Erlangen, Deutschland, Onlinevortrag, 2021

Samberger S.:
Effect of tramp elements on the recyclability of Al-Mg-Zn(Cu) crossover alloys. LightMAT, Onlinevortrag, 2021

Scheiblehner D.:
Schmelzverhalten von Schlacken der sekundären Ferromanganerzeugung. Fachausschuss Sondermetalle, Röthenbach an der Pegnitz, Deutschland, 2021

Schmid F.:
Effect of zirconium addition to wrought AlMgSi alloys on microstructure. TMS – 150th Annual Meeting and Exhibition, Onlinevortrag, 2021

Schmid F.:
Modified pre-aging and artificial aging treatments for AlMgSi alloys. Thermec, Wien, Österreich, Onlinevortrag, 2021

Schmid F.:
Effect of alloy variations on cast grain size of AlMgSi alloys. 11th European Metallurgical Conference, Salzburg, Österreich, Onlinevortrag, 2021

Steinlechner S.:
Unique process for solving the fluorine problem in primary zinc industry. 11th European Metallurgical Conference, Salzburg, Österreich, Onlinevortrag, 2021

Stemper L.:
Evaluation of novel 5xxx-/7xxx-crossover alloys for automotive applications. Thermec, Wien, Österreich, Onlinevortrag, 2021

Stemper L.:
On the application potential of aluminum crossover alloys. TMS – 150th Annual Meeting and Exhibition, Onlinevortrag, 2021

Trink B.:
Influence of texture and microstructure on the bendability of Al-alloys. EUROMAT, Graz, Österreich, Onlinevortrag, 2021

Trink B.:
Al-Mg-Si alloys containing high amounts of primary phases. LightMAT, Onlinevortrag, 2021

Weißensteiner I.:
Quantification of texture in Al-alloys by ODFs. Thermec, Wien, Österreich, Onlinevortrag, 2021

Weißensteiner I.:
Temperature dependent deformation characteristics in Al-alloys. International conference on textures of materials, Japan, Onlinevortrag, 2021

Weißensteiner I.:
Texture alteration in aluminium alloys containing high amounts of primary phases. LightMAT, Onlinevortrag, 2021

Wibner S.:
Primary and Secondary Metallurgy of aluminium. Digital CirCOOL – The Aluminium Cycle, Onlinevortrag, 2021

Wibner S.:
Recycling of aluminium-containing residues. 11th European Metallurgical Conference, Salzburg, Österreich, Onlinevortrag, 2021

Antrekowitsch H.:
Hydrometallurgische Verwertung von verunreinigtem Kupfer aus dem Elektronikschrottrecycling. Berliner Recycling- und Sekundärrohstoff-Konferenz, Berlin, 2. und 3. März, 2020

Antrekowitsch H.:
Hydrometallurgische Verwertung von verunreinigtem Kupfer aus dem Elektronikschrottrecycling. Berliner Recycling- und Sekundärrohstoff-Konferenz, Berlin, 2. and 3. März, 2020

Antrekowitsch J.:
Das COMET-Projekt COMMBY – Aufbau eines fachübergreifenden Forschungsnetzwerkes zur Nutzung metallhältiger Nebenprodukte. Aufbereitungstechnisches Seminar, Leoben, Austria, 2020

Antrekowitsch J.:
Characterization and Processing of Residues from Hydrometallurgical Zinc Smelters. Lead&Zinc 2020, 9th International Symposium on Lead and Zinc Processing, San Diego, USA, 2020

Antrekowitsch J.:
Evaluation and Certification Strategies for Lead–Zinc-Bearing Residues. Lead&Zinc 2020, 9th International Symposium on Lead and Zinc Processing, San Diego, USA, 2020

Auer M.:
Characteristics of EAF dust and recycling technologies focusing on the state-of-the-art Waelz process and the 2sDR process. Short course in Advanced steel mill dust recycling, online, 2020

Auer M.:
Alternative Lösungen für das Recycling von Stahlwerksstaub am Beispiel 2sDR-Verfahren. Berliner Konferenz: mineralische Nebenprodukte und Abfälle, 2020

Brandner U.:
Brandner U.: On the origin of Waelz slag. Webinar (EIT-Raw materials project “RIS-Recover”), online, 2020

Auer M.:
Two step Dust Recycling – A modern recycling technology for high zinc containing EAF-dusts. TMS 2020 – 149th Annual Meeting & Exhibition, San Diego, USA, 2020

Ebner, T.:
Studies on the Formation of Intermetallic Compound Layers in Co(W)–Zn Diffusion Couples. PbZn 2020: 9th International Symposium on Lead and Zinc Processing, San Diego, USA, 2020

Gerold E.:
Pyrometallurgische Aufarbeitung von Zwischenprodukten beim Batterierecycling. Berliner Recycling- und Sekundärrohstoffkonferenz, Berlin, 2020

Gerold E.:
Entwicklung eines hydrometallurgischen Recyclingkonzeptes für metallhaltige Reststoffe aus dem Batteriesektor, Fachausschuss für Sondermetalle, Online, 2020

Hanke G.:
Charakterisierung von Nebenprodukten der metallurgischen Industrie – der erste Schritt zur Zertifizierung. Berliner Konferenz mineralische Nebenprodukte und Abfälle 7, online, 2020

Hanke G.:
Characterization of Metallurgical By-Products: Case Study Waelz Slag. webinar EIT-Raw materials project “RIS-Recover”, online, 2020

Höber L.:
Combined recycling of jarosite and magnesium salt slags – an innovative way for the recovery of indium and silver with reduced carbon emissions. 59th Annual Conference of Metallurgists – COM, 2020

Pogatscher S.:
Crossover-Legierungen – Aushärtung und Verformungspotenzial, 11. RANSHOFENER LEICHTMETALLTAGE (2020), Ranshofen, Österreich

Pogatscher S.:
Characterization of room temperature solute clustering in aluminium alloys, 17th International Conference on Aluminum Alloys ICAA17 (2020) Grenoble, Frankreich

Schatzmann W.:
Pyrometallurgical investigations on mine tailings and metallurgical waste. Webinar (EIT-Raw materials project “RIS-Recover”), online, 2020

Schatzmann W.:
Kinetic aspects of an innovative technology fort he reprocessing of ISF slag. TMS 2020 – 149th Annual Meeting & Exhibition, San Diego, USA, 2020

Schmid F.:
Effect of zirconium addition to wrought Al-Mg-Si alloys on microstructure. TMS 2020 – 149th Annual Meeting & Exhibition, San Diego, USA, 2020

Schmid F.:
Modified aging treatment for enhanced strength and ductility in Al-Mg-Si alloys. ICAA 2020, virtual conference, 2020

Schmid F.:
Effect of Zirconium addition to wrought Al-Mg-Si alloys on microstructure and mechanical properties. International Conference on Plasticity, Damage and Fracture, Cancun, Mexiko, 2020

Steinlechner S.:
Fluorine removal from sulphuric acid solutions.  Zinc experts meeting GDMB, 2020

Steinlechner S.:
Selective recovery of PGMS and ceroium by a hydrochloric leaching process for atuomative catalysts. 59th Annual Conference of Metallurgists, 2020

Steinlechner S.:
Best Practise Example – Austrian Master Program – International Master in Sustainable Materials. The STEAM approach to STEM higher education Inspiring creative thinking in a digital era Training the next generation on SDGs: ET2020 Working Group on modernisation of higher education, Wien, 2020

Steinlechner S.:
The iron precipitate from primary zinc production: A potential future source for indium and silver. Rare Metal Technology 2020, TMS, 2020

Steinlechner S.:
Qualitiy of zinc oxide and the influence on the market ability. Online – Short course: Advanced steel mill dust recycling, EIT RawMaterials, 2020

Weißensteiner I.:
EBSD as a multi-purpose tool for microstructure analysis, LKR Seminar 2020 (online)

Weißensteiner I.:
Mechanisms of low temperature deformation in aluminum alloys. X-ray Powder Diffraction at DESY – new opportunities for research and industry 2020, Online Workshop

Weißensteiner I.:
Texture analysis – applications and challenges. ETH-MUL Netzwerktreffen 2020, Zürich, Schweiz

Wibner S.:
Recycling von Al-Schrotten mit hohem Organikanteil, Recy & DepoTech, Leoben, Austria, 2020

Wibner S.:
Representative Sampling, Fractionation and Melting of Al-Scrap. TMS 2020, 149th Annual Meeting & Exhibition, San Diego, USA, 2020

Wibner S.:
Aufarbeitung von Reststoffen aus der Aluminium-Industrie. Konferenz Mineralische Nebenprodukte und Abfälle, Berlin, Deutschland, 2020

Auer M.:
“2sDR” An innovative mini mill concept for EAF-dust recycling. WASTES 2019, Lissabon, Portugal, 2019

Auer M.:
Selective halogen removal from high Zn-containing residues. Zink-Fachausschuss 2019, Lüttich, Belgien, 2019

Ebner T.:
Studies on the decomposition of H2O2 as additive for the semi-direct recycling of cemented carbides. EMC 2019, Düsseldorf, Deutschland, 2019

Gerold E., D. Hofer und S. Wibner:
Optimization of a leaching process for pulverized metal-containing residues. SIPS 2019 – Sustainable Industrial Processing Summit and Exhibition, Paphos, Zypern, 2019

Gerold E. und L. Stemper:
Synergy effect at the recycling of metal containing waste from the waste industry. EMC 2019, Düsseldorf, Deutschland, 2019

Grasserbauer J.:
Microstructure and texture evolution in laboratory scaled production of aluminum sheets, LightMAT 2019, Manchester, England, 2019

Hofer D.:
Schlackenmetallurgie beim Recycling von niedrig Ta-haltigen Restsoffen. Fachausschuss für Sondermetalle 2019, Wendeburg/Peine, Deutschland, 2019

Hofer D.:
Nonferrous metal slag opportunities – the OpTaRec project. 11th ESEE Dialogue Conference, Zagreb, Kroatien, 2019

Hofer D.:
Slag basicity variation at block smelting for the recycling of tantalum. SIPS 2019 – Sustainable Industrial Processing Summit and Exhibition, Paphos, Zypern, 2019

Hofer D.:
Slag metallurgy for recycling of Ta. EMC 2019, Düsseldorf, Deutschland, 2019

Hofer D.:
Influence of CaO/SiO2/Al2O3 ratio on the melting behaviour of SynCon slags. TMS 2019, Freeze Linings: Myth and Reality, San Antonio, USA, 2019

Pogatscher S.:
Steuerbare Aushärtung von Aluminium-Legierungen, Schweizer Wärmebehandlungssymposium (2019), Schweiz.

Pogatscher S. P. Ebenberger L. Stemper, B. Gruber, B. Gerold und P. J. Uggowitzer:
Reaching improved surface quality and strength in highly formable AlMg-based alloys. LightMat (2019), Manchester, UK

Pogatscher S.:
Phase Transitions in Non-Equilibrium Metallic Systems. Max-Planck-Institut für Eisenforschung MPIE (2019), Düsseldorf, Deutschland

Pogatscher S.:
Phase Transitions in Quenched Metallic Systems. MIAMI facilities, University of Huddersfield (2019), Huddersfield, UK

Sagadin C.:
High Temperature Corrosion of Magnesia based Refractory by Ferronickel Slags. TMS 2019, Freeze Linings: Myth and Reality, San Antonio, Texas USA 2019

Sagadin C.:
Modeling of Refractory Corrosion by Thermodynamic Simulation. EMC 2019, Düsseldorf, Deutschland, 2019

Schatzmann W.:
Introduction to pyro-metallurgy: Industrial by-products – potential substitution for primary resources? Goce Delčev University of Štip, Nordmazedonien, 2019

Schatzmann W. und J. Antrekowitsch:
Assessment of by-products – from waste to values. WASTES Conference 2019, Lissabon, Portugal, 2019

Schmid F.:
Effect of thermal treatments on Sn-alloyed Al-Mg-Si alloys. LightMAT 2019, Manchester, England, 2019

Schmid F.:
Industry-oriented sample preparation of 6xxx and 5xxx aluminum alloys in laboratory scale. European Metallurgical Conference, Düsseldorf, Deutschland, 2019

Schmid F.:
Alternative Wärmebehandlungen von Al-Mg-Si-Legierungen für den Außenhautbereich. Jahrestagung des Leichtmetall-Fachausschusses, Langenbruck, Deutschland, 2019

Steinlechner S.:
Extraction of Indium and Silver aside of Zinc from Jarosite residue. European Metallurgical Conference, Düsseldorf, Deutschland, 2019

Steinlechner S.:
Selective vaporization of indium and silver from an iron precipitation sludge via a reductive chlorination process. SIPS 2019 – Sustainable Industrial Processing Summit and Exhibition, Paphos, Zypern, 2019

Steinlechner S.:
Extraction of Zinc, Silver and Indium via Vaporization from Jarosite Residue, REWAS TMS 2019, San Antonio, USA, 2019

Steinlechner S.:
SUMA – Master Program on Sustainable Materials, 10th ESEE Dialogue Conference, 28th March 2019, Leoben

I. Weißensteiner und B. Gruber:
Microstructure and texture evolution upon cryogenic forming of aluminum alloys. LightMat 2019 Manchester, UK

Wibner S.:
Comparison of two dross press systems in the aluminum recycling industry. Sustainable Industrial Processing Summit and Exhibition, Paphos, Zypern, 2019

Wibner S.:
Einfluss der Schrottvorbehandlung auf die Krätzebildung. Jahrestagung des Leichtmetall-Fachausschusses, Langenbruck, Deutschland, 2019

Wibner S.:
Recycling of aluminium with variation of the scrap processing techniques. European Metallurgical Conference, Düsseldorf, Deutschland, 2019

Antrekowitsch H. und R. Pomberger:
Li-Ionen-Batterien – Vom Rohstoff bis zum Recycling. Produktion der Zukunft, Stakeholderdialog bmvit, Wien, 2018

Antrekowitsch J.:
Recycling PGMs from Spent Catalysts. Recycling Metals from Industrial Wastes, Colorado School of Mines, Golden, 26th-28th of July, 2018

Antrekowitsch J.:
Metal bearing by-products from metallurgical industry – An important resource for the future. MicroCAD-MultiScience, Miskolc, of September, 2018

Antrekowitsch J.:
Die Erneuerbarkeit von Metallressourcen – Chancen und Limits für das Recycling. EUMICON, Vienna, 27th of September, 2018

Antrekowitsch J.:
2sDR – 2-step Dust Recycling – a mini mill solution for future steel mill dust recycling. Zinc Experts Meeting, Nordenham, 14th-16th of November, 2018

Antrekowitsch J.:
By-products from metallurgical industry – an important resource for Europe’s raw materials strategy. Waste V4 Conference, Miskolc, 22nd-23rd of November, 2018

Antrekowitsch J:
Christian Doppler Labor für Optimierung und Biomasseeinsatz beim Recycling von Schwermetallen. Tag der Nichteisenmetallurgie, 29th of November, 2018

Bolitschek J.:
Correlation of reduction conditions and MoO2 characteristics on the evolving Mo morphology during hydrogen reduction. Powdermet, San Antonio, USA, 2018

Ebenberger P., S. Kirnstötter, R. Tosone, P.J. Uggowitzer und S. Pogatscher:
Effect of composition and microstructure of 5xxx series aluminium on Lüders elongation and dynamic strain aging. International Conference on Aluminum Alloys, Montreal, Kanada, 2018

Gruber B., F. Grabner, T. Kremmer, S. Kirnstötter, R. Schneider, R. Schäublin, P. J. Uggowitzer und S. Pogatscher:
Improved formability of aluminium alloys at low temperatures for automotive applications. TMS2018, 147th Annual Meeting & Exhibition, Phoenix, USA, 2018

Gruber B., F. Grabner, T. Kremmer, S. Kirnstötter, R. Schneider, R. Schäublin, P. J. Uggowitzer, F. Spiekermann und S. Pogatscher:
Recovery of low temperature deformed AlMg- and AlMgSi-alloys. ICAA 16, Montreal, Kanada, 2018

Hofer D.:
High Temperature Characteristics of Slags Originating from the Production of Synthetic Tantalum Concentrate. Extraction 2018, Peter Hayes Symposium on Pyrometallurgical Processing, Ottawa, Kanada, 2018

Kerschbaumer C.:
Entwicklung eines semidirekten Verfahrens für das Recycling von Bohrkronen. Fachausschuss für Sondermetalle der GDMB, Gelnhausen, 2018

Pogatscher S.:
Strategies for improved formability during processing and high strength in service for automotive Al-Mg-Si alloys. Thermec’2018, Paris, Frankreich, 2018

Pogatscher S.:
Steuerbare Aushärtung von Aluminium-Legierungen. Seminar Wärmebehandlung – und Oberflächenbehandlung von Metallen, Montanuniversität – Außeninstitut, Leoben, Österreich, 2018

Pogatscher S.: State of the art – What we think we know. Interaction of clusters and precipitates – Positive and negative effect. Workshop and Brainstorming Event: Formation of crystalline phases from precursor clusters in Al alloys, TU Wien – Institut für Werkstoffwissenschaft und Werkstofftechnologie, Weißenkirchen in der Wachau, Österreich, 2018

Sagadin C.:
Influence of several Oxides on the Melting Behaviour of Ferronickel Slags. Infacon XV: International Ferro-Alloys Congress, Cape Town, South Africa, 2018

Sagadin C.:
High Temperature Phase Formation at the Slag/Refractory Interphase at Ferronickel Production. Extraction 2018, 7th International Symposium on Advances in Sulfide Smelting, Ottawa, Kanada, 2018

Scheiber S.:
Effects of zinc addition on microstructure of SnCu3.5Ni0.3 alloy. International Students’ Day of Metallurgy, Freiberg, Deutschland, 2018

Steinlechner S.:
Recycling of industrial residues, CirCOOL 2018 Summer School, 13. July 2018

Steinlechner S.:
Development of a recycling concept for Jarosite with special emphasis on the behaviour of indium and silver, Extraction 2018, 7th International Symposium on Advances in Sulfide Smelting, Ottawa, Kanada, 2018

Antrekowitsch J.:
Steel Mill Dust, a Possible Source for Lead Recycling? – Potential and Recent Developments. Lead Experts Meeting der GDMB, Hamburg, Deutschland, 2017

Antrekowitsch J.:
By-products and their contribution to a sustainable metal production. SIPS – Sustainable Industrial Processing, Cancún, Mexiko, 2017

Antrekowitsch J.:
By-products from metallurgical operations – An important secondary metal resource for Europe. Wastes: Solutions, Treatments and Opportunities, Porto, Portugal, 2017

Antrekowitsch J.:
Rohstoffe und Klimaschutz – Eine kritische Betrachtung aus Sicht der Metallgewinnung. 5. steirisches Klimaforum, Leoben, Österreich, 2017

Antrekowitsch J.:
Silver and Gold recovery from dumps out of metallurgical operations. Annual Conference of International Precious Metals Institute, Orlando, USA, 2017

Benigni C.:
Impurities of secondary zinc oxides as limiting factors for the primary industry. COM 2017, Vancouver, Kanada

Benigni C.:
Zinc oxide from steel mill dust – A wide range of opportunities. ESTAD 2017, Wien, Österreich

Doppler T.:
Implications when alloying Magnesium into Aluminium Melt. European Metallurgical Conference, Leipzig, Deutschland, 2017

Dumitraschkewitz P., G. Rank, S. C. Sackl, S. S. A. Gerstl und S. Pogatscher:
Solute Distribution Analysis of Early Stages of Aging in Al-Mg-Si Alloys via Atom Probe Tomography. TMS 2017, San Diego

Dumitraschkewitz P., G. Rank, P. Uggowitzer, S.S.A. Gerstl und S. Pogatscher:
Atom probe tomography of early natural aging and pre-aging of AA 6016. LightMAT, 2017, Bremen

Ebenberger P., B. Gerold, R. Tosone, A.-C. Kaiß, P.J. Uggowitzer und S. Pogatscher:
5xxx series aluminium alloys for automotive applications. Leichtmetallfachausschuss der GDMB, Essen, Deutschland, 2017

Ebenberger P., B. Gerold, R. Tosone, A.-C. Kaiß, P.J. Uggowitzer und S. Pogatscher:
5xxx series aluminium alloys for automotive applications. European Aluminium Congress, Düsseldorf, Deutschland, 2017

Gruber B., F. Grabner, T. Kremmer, S. Kirnstötter, R. Schneider, P. J. Uggowitzer und S. Pogatscher:
Cryogenic formability of aluminium alloys for automotive applications. European Aluminium Congress, Düsseldorf, Deutschland, 2017

Gruber B., F. Grabner, T. Kremmer, S. Kirnstötter, R. Schneider, R. Schäublin, S. Zaefferer, D. Raabe, P. J. Uggowitzer und S. Pogatscher:
Improved formability of aluminium alloys at low temperatures for automotive applications. LightMAT, Bremen, Deutschland, 2017

Kerschbaumer C.:
Leaching Behavior of Hard Metals used in Drilling Industry. European Metallurgical Conference, Leipzig, Deutschland, 2017

Kerschbaumer C.:
Leaching kinetics for semi-direct recycling of drill bits. 19th Plansee Seminar, Reutte, Österreich, 2017

Kolb G. K.-H., H. Antrekowitsch, D. Pöschmann, P. J. Uggowitzer und S. Pogatscher:
Effect of Interrupted Quenching on Al-Zn-Mg-Cu alloys.TMS 2017,146th Annual Meeting & Exhibition, San Diego, USA, 2017

Kücher G.:
Disclosure of the Kinetic Relations of Semidirect Cemented Carbide Leaching in Acid Media. TMS – 146th Annual Meeting & Exhibition, San Diego, USA, 2017

Kücher G.:
Grundlagen der Laugung von Cobalt aus Hartmetallen mittels salzsaurer Lösung, Fachausschuss für Sondermetalle der GDMB, Nürnberg, 2017

Leuchtenmüller M.:
Pyrometallurgical Recovery of Chromium from Wastes of Stainless Steel Production – an Overview. European Metallurgical Conference, Leipzig, Deutschland, 2017

Pichler C.:
Thermische Behandlung von Entschwefelungsschlacke aus der Eisen- und Stahlindustrie. Mineralische Nebenprodukte und Abfälle (2017), Berlin, Deutschland

Pogatscher S.:
Phase transitions in Au based metallic glasses studied via the Flash DSC 1. 3rd Flash DSC Conference, Zurich, Switzerland, 2017

Pogatscher S.:
Designable hardening kinetics of aluminium alloys. Adolf-Martens Festkolloquium, BAM, Berlin, Deutschland, 2017

Pogatscher S.:
Phase transitions in Au based metallic glasses studied via chip calorimetry.  The 16th International Conference on Rapidly Quenched & Metastable Materials (2017), Leoben, Österreich

Pogatscher S.:
Designable hardening kinetics of aluminium alloys, Colloquium of the Department of Materials Engineering at FAU Erlangen (2017), Erlangen, Deutschland

Pogatscher S.:
Designable clustering and precipitation kinetics in aluminium alloys, TUG/KFU Physics Colloquium at Graz University of Technology (2017), Graz, Österreich

Pogatscher S.:
Measuring phase transitions in Au based metallic glasses via fast differential scanning calorimetry. 8th International Discussion Meeting on Relaxations in Complex Systems (2017), Wisla, Polen

Pogatscher S.:
Transformations in metallic glass forming systems studied via fast scanning calorimetry. EMN 3CG & Metallic Glasses Meeting, Berlin, Deutschland

Pogatscher S., G. K.-H Kolb., H. Antrekowitsch, T. Kremmer, P. Dumitraschkewitz , D. Pöschmann und P. J. Uggowitzer:
Influence of Interrupted Quenching on Microstructure and Properties of 7xxx Aluminium Alloys. LightMAT, Bremen, Deutschland, 2017

Pogatscher S., M. Werinos und P. J. Uggowitzer:
Effects of clustering and trace elements on precipitation hardening of Al-Mg-Si alloys. TMS2017 (2017), San Diego, USA

Sagadin C.:
Evaluation of High Temperature Refractory Corrosion by Liquid Al2O3–Fe2O3–MgO–SiO2. TMS 2017, 8th International Symposium on High-Temperature Metallurgical Processing (2017), San Diego, USA

Sagadin C.:
Determination of the high temperature melting behaviour of synthetic ferronickel slags. SIPS 2017, Sustainable Industrial Processing Summit, Cancun, Mexiko 2017

Scheiber S.:
Investigation of phase formation in tin alloys. European Metallurgical Conference, Leipzig, Deutschland, 2017

Scheiber S.:
New efforts concerning microstructural changes of tin based materials due to alloying. XXVI International Materials Research Congress, Cancún, Mexiko, 2017

Sorger C.:
Laugungsverhalten von Kupfer aus einer Elektro- und Elektroaltgerätefraktion. Recycling- und Rohstoffkonferenz, Berlin, Deutschland, 2017

Sorger C.:
Pyrometallurgical processing and slag analysis of WEEE. SIPS 2017, Sustainable Industrial Processing Summit, Cancun, Mexiko 2017

Steinacker S.:
The Role and Influence of Impurities on the Quality of Copper Cathodes. XXXI. microCAD International Multidisciplinary Scientific Conference, Miskolc, Ungarn, 2017

Steinacker S.:
Investigation of the Leaching Behavior of a Copper-Iron-Molybdenum Alloy in H2SO4. Nickel-Cobalt-Copper-Conference, Perth, Australien, 2017

Steinlechner S.:
Optimization in the copper anode slime treatment – mineralogical characterization and hydrometallurgical process development for separation of selected side-elements. XXXI. microCAD International Multidisciplinary Scientific Conference, Miskolc, Ungarn, 2017

Steinlechner S.:
Present status in the recycling of industrial residues from lead, zinc and copper industry and their possible future contribution to the supply of selected minor elements, like silver. 26th International Conference on Metallurgy and Materials, Brünn, Tschechische Republik, 2017

Wegscheider S.:
Process development for a combined treatment of EAFD and jarosite. Wastes: Solutions, Treatments and Opportunities, Porto, Portugal, 2017

Wegscheider S.:
Recycling of jarosite and electric arc furnace dust in a metal bath process to recover valuable metals. SIPS 2017, Sustainable Industrial Processing Summit, Cancun, Mexiko 2017

Antrekowitsch H.:
The importance of metal recycling for the sustainability of the metallurgical industry. OPMR 2016, 5th ESEE Dialogue, Budapest, Ungarn, 2016

Antrekowitsch H.:
Recycling of Mo-containing Materials – Challenges for the Future. 28th Annual General Meeting of the International Molybdenum Association, Wien, Austria, 2016

Antrekowitsch H.:
Energie- und Ressourceneffizienz beim Recycling von Metallen. Re-source 2016, München, Deutschland, 2016

Antrekowitsch H.:
Metallrecycling. Fachausschuss für Abfallwirtschaft und Städtereinigung des Österreichischen Städtebundes, Leoben, 2016

Antrekowitsch J.:
Recycling of by-products for a sustainable metal production. OPMR 2016, Budapest, Hungary, 2016

Antrekowitsch J.
By-products and their contribution to a sustainable metal production. SIPS 2016, Sustainable Industrial Processing, Hainan, China, 2016

Antrekowitsch J.:
Opportunities for the utilization of zinc oxides from by-products. Zinc experts meeting, GDMB, Odda, Norway, 2016

Antrekowitsch J.:
Iron as a Limiting Factor in the Direct Leaching of Waelz Oxides. IMPC/COM 2016, Quebec, Canada, 2016

Antrekowitsch J.:
Zinc Recycling Out of Industrial Residues. Recycing Metals from Industrial Waste, Colorado School of Mines, Golden, USA, 2016

Antrekowitsch J.:
Opportunities for the utilization of zinc oxides from secondary sources. 8th International Zinc Conference, Dubai, UAE, 2016

Antrekowitsch J.:
Recycling of Poly-Metallic Residues from Metal Industry – Current Status and Future Developments. TMS 2016, 145 Annual Meeting & Exhibition – REWAS, Nashville, USA, 2016

Antrekowitsch J.:
Current status and recent development in steel mill dust recycling. Recycling of Non-Ferrous Metals, Krakow, Poland, 2016

Doppler T.:
Influence of Ca on the oxidation behaviour of AlMg-alloys. OPMR 2016, Budapest, Hungary, 2016

Doppler T.:
Influence of Ca, rare earth metals and Li on the oxidation behaviour of AlMg5-melts. Aluminium 2016 Conference, GDA, Duesseldorf, Germany, 2016

Doppler T.:
Einfluss von Spurenelementen und Atmosphäre auf das Oxidationsverhalten von AlMg5-Schmelzen. Leichtmetall-Fachausschuss, Bonn, Deutschland, 2016

Dumitraschkewitz P.:
Atomsondentomographie und Clusterbildung in Aluminium Legierungen. Doktorandenseminar zur „Werkstofftechnik von Al“ 2016, Österreich, 2016

Dumitraschkewitz P.:
Strategies for analyzing atom probe tomography data of an as-quenched and naturally aged Al-Mg-Si alloy. MetPhys ETH Zürich, Schweiz, 2016

Dumitraschkewitz P.:
Rapid Clusters. Sitzung des wissenschaftlich-technologischen Beirats 2016 (AMAG), Österreich, 2016

Kolb G., H. Antrekowitsch, P. J. Uggowitzer, D. Pöschmann and S. Pogatscher:
A comparative study of CALPHAD and differential scanning calorimetry to optimize 7xxx aluminum alloys . Thermec´ 2016, Graz, Österreich, 2016

Kolb G., H. Antrekowitsch, P. J. Uggowitzer, D. Pöschmann and S. Pogatscher:
Comparative study of thermodynamic predictions and differential scanning calorimetry for Al-Zn-Mg-Cu alloys. ICAA 15, Chongqing, China, 2016

Kücher G.:
Evaluación Inicial basada en una Revisión Literaria de Métodos Semidirectos de la Recuperación de Carburos Cementados. 16º SAM-CONAMET, Córdoba, Argentina, 2016

Leuchtenmueller M.:
Recovery of Chromium from Stainless Steel Slags. XXX microCAD, Miskolc, Hungary, 2016

Luidold, S.:
Gewinnung von Molybdän und Wolfram. Plansee SE, Reutte, 2016

Luidold, S.:
High temperature corrosion mechanisms of refractories and ferroalloy slags. 10th International Conference on Molten Slags, Fluxes and Salts, Seattle, USA, 2016

 

Pichler C.:
Strategies for Waelz slag treatment. Zinc Experts Meeting (2016), Odda, Norwegen

Pichler C.:
Thermal processing of desulphurization slags. Proc. of 14th International Symposium on the desulphurization of hot metal and steel (2016), Athen, Griechenland, 73–80

Pichler C.:
Potential of slags from the nonferrous metallurgy. 11th Global Slag Conference (2016), London, UK, 24.-25.05.2016

Pichler C.:
Lead recovery out of residues from hydrometallurgical zinc winning. 70th GDMB Lead Expert Meeting, Plovdiv, Bulgarien, 19.-20.05.2016

Pogatscher S., S. Gerstl, J. F. Löffler und P. J. Uggowitzer:
Mikrolegieren von Aluminiumwerkstoffen der 6xxx-Familie. 9. Ranshofener Leichtmetalltage (2016), Bad Ischl, Österreich

Pogatscher S., P. Dumitraschkewitz und S.S.A Gerstl:
Atom probe tomography of early stage clustering in Al alloys. EMC2016, Lyon, Frankreich, 2016

Pogatscher S., M. Werinos, H. Antrekowitsch und P.J. Uggowitzer:
Trace element-added Al-Mg-Si alloys. Thermec’2016, Graz, Austria, 2016

Pogatscher S., P. Dumitraschkewitz und S.S.A Gerstl:
Atom probe tomography investigation of early stage clustering of as-quenched Al-Mg-Si alloys. ICAA15, Chongqing

Pogatscher S.:
Concepts to optimize aging of Al-Mg-Si alloys, Seminar talk, Institute of Materials Science and Welding, Graz University of Technology, Österreich, 2016

Rösler G.:
Mini Mill Solutions in the Recycling of Electric Arc Furnace Dust – The 2sDR Process. REWAS 2016, Nashville Tennessee, 2016

Sagadin C.:
Untersuchungen zum Verschleiß von Feuerfestmaterial durch MgO-FeOx-SiO2-Al2O3-Schlacken. Fachausschuss für Sondermetalle der GDMB (2016), Alzenau, Deutschland

Sorger C.:
Thermodynamic Investigations for the Separation and Processing of different Metals from waste electrical and electronic equipment. Copper 2016, Kobe, Japan

Steinacker S.:
Investigation and Pyrometallurgical Reduction of Copper Compounds from Electric Furnace Slag. Copper 2016, Kobe, Japan, 2016

Steinacker S.:
Aspectos de la Formación de Polvo Volátil en la Industria del Cobre Primario. 16º SAM-CONAMET Congreso Internacional de Metalurgia y Materiales, Córdoba, Argentina, 2016

Steinacker S.:
Treatment of Residues from the Copper Industry Including a New Approach for Electric Furnace Slag. OPMR 2016, Budapest, Hungary, 2016

Steinacker S.:
Kinetic Investigation of the Electric Furnace Copper Slag Treatment. TMS 2016 145th Annual Meeting, Nashvile, TN, USA, 2016

Steinacker S.:
Recyclingmethoden für Reststoffe aus der Kupfermetallurgie. Berliner Recycling- und Rohstoffkonferenz, Berlin, Deutschland, 2016

Steinacker S.:
Copper Recovery from Sulfidic Particles in Electric Furnace Slag. 75th GDMB Copper Experts Committee, Goslar, Deutschland, 2016

Steinlechner S.:
Potential Contribution to the Supply of Silver by the Recycling of Industrial Residues from Zn, Pb, and Cu Plants, Process. Proc. of REWAS 2016, Nashville Tennessee

Steinlechner S.:
Residues from Lead, Zinc and Copper Industry and their Possible Contribution to the Supply of Selected Minor Elements. Proc. of COM 2016 – 55th Conference of Metallurgists hosted by IMPC 2016

Steinlechner S.:
Recycling in Nonferrous Metallurgy, ALPS – Austrian Leadership Program, 17th June 2016

Steinlechner S.:
Vorstellung der Forschungsaktivitäten 2016, Nichteisenmetallurgen Seminar

Steinlechner S.:
Activities of the Chair of Nonferrous Metallurgy, WUHAN Summer school, 12th July 2016

Wegscheider S.:
Residues from the zinc industry – a potential future resource for silver and indium, COM 2016 – 55th Conference of Metallurgists hosted by IMPC 2016, Quebec City, Kanada

Wegscheider S.:
Thermodynamic considerations regarding the volatilization behavior of silver and indium from jarosite by a pyrometallurgical treatment. Multi Science – XXX microCAD International Multidisciplinary Scientific Conference, University of Miskolc, Miskolc, Hungary 2016

Zöhrer M.:
Konditionierung und Recycling aluminiumhaltiger Reststoffe minderer Qualität. Recy & DepoTech (2016), Leoben, Österreich

Angerer T.:
Neue Generation bleifreier Kuper-Zink-Legierungen auf Kupfer-Silizium-Mangan-Basis. 12. Kupfer Symposium, Berlin, Deutschland, 2015

Angerer T.:
Development of a Lead-free Brass Alloy. EMC, Düsseldorf, Deutschland, 2015

Antrekowitsch H.:
Recycling in der Automobilindustrie – Ist damit eine Rohstoffversorgung zukünftig gesichert?. Vortragsreihe: Innovationen in der Fahrzeugtechnik, FH Joanneum, Graz, 2015

Antrekowitsch H.:
Recycling of low grade aluminium scrap – optimisation of the melting process by using oxyfuel technology. 3rd International Messer Symposium. Baden, 2015

Antrekowitsch H.:
Reststoffe aus der Metallurgie – Potenzial oder Konkurrenz für die Mineralrohstoffindustrie. Forum Rohstoffe, Informationsveranstaltung, Schladming, 2015

Antrekowitsch J.:
The current status of mini mill solutions for the recycling of steel mill dusts. SIPS2015 – Sustainable Industrial Processing Summit and Exhibition, Antalya, Turkey (2015)

Antrekowitsch J.:
Steel Mill Dust Recycling in the 21st Century, XXIX. microCAD International Multidisciplinary Scientific Conference, Miskolc, Ungarn (2015)

Antrekowitsch J.:
Recycling of Complex Materials with Focus on Zinc-, Lead- Containing Residues, Colloquium on Secondary Resources, Amirkabir University, Teheran, Iran (2015)

Antrekowitsch J.:
Recycling of Zinc, Short Course ate EMC 2015, Düsseldorf, Deutschland (2015)

Antrekowitsch J.:
Steel Mill Dust Recycling in the 21st Century – New Developments, Internationa Zinc and Zinc Oxide Conference, IZA, Orlando, USA (2015)

Antrekowitsch J.:
Stahlwerksstaubrecycling im 21. Jahrhundert, aktuelle Entwicklungen und zukünftige Herausforderungen, Berliner Recycling- und Rohstoffkonferenz, Berlin, Deutschland (2015)

Antrekowitsch J.:
Copper Networkingin South East Europe – Potentials and Challenges, 3rd ESEE-Conference, Leoben, Austria (2015)

Antrekowitsch J.:
Knowledge Innovation Community – Lead-Zinc-Recycling from dust and slags, Zinc experts meeting, GDMB, Krakau, Polen (2015)

Antrekowitsch J.:
Recovery of Lead in Residues from Hydrometallurgical Zinc Winning, 4th Secondary Lead Conference, Bangkok, Thailand, (2015)

Benedek L.:
Challenges regarding recycling of REEs from Permanent magnets in a WEEE-fraction. EMC, Düsseldorf, Deutschland, 2015

Doppler T.:
Optimisation of the Recycling Process for Aluminium Scraps with High Impurities. EMC, Düsseldorf, Deutschland, 2015

Ebner T.:
Reuse of metal cutting tools by wet chemical decoating. EMC, Düsseldorf, Deutschland, 2015

Holec D., P. Dumitraschkewitz, F. D. Fischer und D. Vollath:
Size-dependent surface energies of Au nanoparticles. 62. Arlberg Kolloquium, Österreich, 2015, 1–13

Hutabarat I.:
Characterisation and Thermal Behavior of Indonesian Copper Sulphides for Leaching Process. EMC, Düsseldorf, Deutschland, 2015

Kremmer T.:
Impact of microstructural characteristics on the corrosion morphology of High-Strength Brazing Sheets (Aluminium). EMC, Düsseldorf, Deutschland, 2015

Kremmer T.:
Microstructural evolution and barrier layer dissolution during brazing of high strength brazing sheets. Aluminium Surface Science and Technology, Funchal, Portugal, 2015

Kremmer T.:
Optimierung der Eigenschaften plattierter 7xxx-Werkstoffe. Leichtmetallfachausschuss der GDMB, Düsseldorf, Deutschland, 2015

Luidold S.:
C
hallenges in the field of extractive metallurgy of technological metals. EMC, Düsseldorf, Deutschland, 2015

Luidold, S.:
Recycling technologies for rare earths. ISFR, Leoben, 2015

Pichler C.:
New development in metal recovery from secondary resources. 4th Slag Valorisation Symposium Zero Waste, Leuven, Belgien, 15-17.04.2015

Pichler C.:
Sustainable Ways to Recycle Metallurgical Residues in the 21st Century. EMC, Düsseldorf, Deutschland, 2015

Pichler C.:
Strategies for the treatment of metallurgical recycling slags. Wastes: Solutions, Treatments and Opportunities (2015), Viana do Castelo, Portugal

Pirker A.:
AMAG experience of optimisation of the melting process for low grade aluminium scrap. 3rd International Messer Symposium. Baden, 2015

Pirker A.:
Optimierung des Al-Recyclingprozesses von verunreinigten Schrotten. Forum für Metallurgie und Werkstofftechnik, „Mensch und Technik“, Leoben, Österreich, 2015

Pirker A.:
Recycling of Aluminium Scrap via Salt Process. EMC, Düsseldorf, Deutschland, 2015

Pogatscher S., H. Antrekowitsch, M. Werinos, G. Rank, A. Kaiß, R. Prillhofer, J. Löffler und P. Uggowitzer:
Statistical and Thermodynamic Optimization of Trace-Element Modified Al-Mg-Si-Cu Alloys. TMS 2015, Orlando, USA, 2015

Pogatscher S., S.S.A Gerstl:
Atom Probe Tomography of Early Stage Clustering in Aluminum Alloys. European Atom Probe Workshop, Leoben, Österreich, 2015

Pogatscher S.:
Solute transport in age-hardenable aluminum alloys. 26th International Symposium on transport phenomena – ISTP26, Leoben, Österreich, 2015

Pogatscher S.:
Concepts to optimize aging of Al-Mg-Si alloys. European Aluminium Congress, Düsseldorf, Deutschland, 2015

Pogatscher S., P. Uggowitzer und J. Löffler:
Characterization of bulk metallic glasses via fast differential scanning calorimetry. TMS 2015, Orlando, USA, 2015

Ratschbacher K.:
Oxidation Kinetics of a Molybdenum-Tantalum-Alloy. EMC, Düsseldorf, Deutschland, 2015

Rösler G.:
Lead Slag – A possible secondary resource to recover valuable metals out of a waste. 4th International Secondary Lead Conference, Bangkok, Thailand, 2015

Rösler G.:
Product upgrade of Waelz oxide using an altenative method. MultiScience – XXIX. microCAD, Miskolc, Ungarn, 2015

Rösler G.:
Sustainable Recovery of Heavy Metals from Metallurgical Dusts – The 2sDR Process. EMC, Düsseldorf, Deutschland, 2015

Schlögl C. und H. Antrekowitsch:
Impact of different alloying additives and pre-treatments on the anodising behaviour of AA2007. VII Aluminium Surface Since and Technology, Madeira, 2015

Schlögl C.:
Anodising of Recycling Aluminium. EMC, Düsseldorf, Deutschland, 2015

Sorger C.:
Effects of Pyrolysis on the Metallurgical Processing of Waste Electrical and Electronic Equipment. EMC, Düsseldorf, Deutschland, 2015

Steinacker S.:
Behandlung und Verwertung der Reststoffe aus der Kupfer-Metallurgie. Berliner Konferenz Mineralische Nebenprodukte und Abfälle 2, Berlin, Deutschland, 04.05.2015

Steinacker S.:
Thermodynamic Aspects of Flue Dust Formation in the Primary Copper Industry. 54th Annual COM, Toronto, Kanada, 25.08.2015

Steinacker S.:
Thermodynamic Considerations for Primary Copper Flue Dust. 74th GDMB Copper Experts Meeting, Pori, Finland, 03.09.2015

Steinacker S.:
Recycling Techniques for Zinc-Containing Residues from the Secondary Copper Industry. 63rd GDMB Zinc Expert Committee, Krakow, Poland, 27.10.2015

Steinacker S.:
Recycling of Residues from the Copper Industry. EMC, Düsseldorf, Deutschland, 2015

Steinlechner S.:
POTENTIAL OF INDUSTRIAL WASTES RECYCLING FROM LEAD, ZINC OR COPPER INDUSTRY TO CONTRIBUTE TO THE SUPPLY OF MINOR METALS. Proc. Of SIPS2015 – Sustainable Industrial Processing Summit and Exhibition, Antalya, Turkey (2015)

Steinlechner S.:
Potential of lead, zinc and copper containing residues to contribute to the supply of minor metals. Proc. of Wastes: Solutions, Treatments and Opportunities (2015), Viana do Castelo, Portugal

Steinlechner S.:
Recycling Potential of Precious Metals From Zinc, Lead and Copper Containing Residues. EMC, Düsseldorf, Deutschland, 2015

Steinlechner S.:
Recycling potential of precious metals from zinc, lead and copper containing residues. Proc. of EMC (2015), Düsseldorf, Deutschland

Steinlechner S.:
Technical presentation – Nonferrous Metallurgy. Third ESEE Dialogue Conference, Leoben, Austria (2015)

Steinlechner S.:
The role of minor metals in the recycling of industrial residues. Amirkabir University of Technology, Tehran, IRAN

Stuhlpfarrer P.:
Elektronikschrottrecycling. Recycling-Fachausschuss, Austrian Society of Metallurgy, 2012, Leoben, Austria

Stuhlpfarrer P.:
Optimierung der pyrolytischen Vorbehandlung von Leiterplattenschrotten unter besonderer Betrachtung der Bromgewinnung. Recycling- und Rohstoffkonferenz, Berlin, Deutschland, 2015

Stuhlpfarrer P.:
Recycling of Nd2Fe14B-Magnets. EMC, Düsseldorf, Deutschland, 2015

Wegscheider S.:
The 2sDR process – Innovative treatment of Electric Arc Furnace Dust. Wastes: Solutions, Treatments and Opportunities, Viana do Castelo, Portugal, 2015

Werinos M.:
Influence of Alloy Production History on Natural Aging of AA6061 Modified with Sn. EMC, Düsseldorf, Deutschland, 2015

Werinos M.:
Influence of temperature on natural aging kinetics of AA6061 modified with Sn. TMS 2015, Orlando, USA, 2015

Zöhrer M.:
Agglomeration und Recycling von metallhaltigen Stäuben und Schlämmen. Green Resources Circle – Eco World Styria, Graz, 2015

Zöhrer M.:
Agglomeration und Recycling metallhaltiger Reststoffe. 14. Fachausschuss-Sitzung “Recycling”, Arnoldstein, Österreich, 2015

Zöhrer M.:
Recycling von Produktionsrückständen aus der metallverarbeitenden Industrie. Recycling- und Rohstoffkonferenz, Berlin, Deutschland, 2015

Zöhrer M.:
Treatment of Industrial Waste. EMC, Düsseldorf, Deutschland, 2015

Angerer T.:
Metallrecycling. Monat der freien Bildung, Leoben , Österreich, 2014

Antrekowitsch H.:
Kann die jahrhundertlange Erfolgsgeschichte der europäischen Metallerzeugung fortgesetzt werden?. Metallerzeugung – Quo vadis? Tag der Metallurgie, Goslar, Deutschland, 2014

Antrekowitsch H.:
Kann durch das Recycling die Versorgung mit wirtschaftsstrategischen Rohstoffen gesichert werden?. Workshop Ressourcen Initiative der Industriellenvereinigung, Wien, 2014

Antrekowitsch J.:
Residues from Zinc-, Lead- and Copper production – hidden ressources for Silver and Gold. IPMI, 28th annual conference, Orlando, 2014

Antrekowitsch J.:
Heavy Metal Recycling from Complex Wastes. Seminar Nonferrous Metallurgy MUL-Colorado School of Mines. Golden, USA, 2014

Antrekowitsch J.:
Primary Metallurgy and Recycling of Zinc. Zinc Experts Meeting 2014 GDMB. Leende, Holland, 2014

Antrekowitsch J.:
Rückgewinnung von Zink, Indium und Gallium aus Zink-Tailings mittels bakterieller Laugung. Produktion der Zukunft – kritische Rohstoffe, Linz, 2014

Benedek L.:
Entwicklung und Optimierung der gesamten Rückgewinnungskette für kritische Rohstoffe aus EAG. Informationsveranstaltung über die Förderprogramme “Produktion der Zukunft” und “Energieforschung”, Leoben, Österreich, 2014

Benedek L.:
Recyclingkonzepte für Photovoltaikmodule. DepoTech, Leoben, Österreich, 2014

Benedek L.:
Recyclingkonzepte für Photovoltaikmodule. Recycling- und Rohstoffkonferenz, Berlin, Deutschland, 2014

Benedek L.:
Stoffströme und logistische Herausforderungen beim Elektronikschrottrecycling. Symposium Stoffflüsse – primär und sekundär. Leoben, Österreich, 2014

Kaindl M.:
Kreislaufschließung beim Recycling von NiMH-Batterien. Recycling- und Rohstoffkonferenz, Berlin, Deutschland, 2014

Kremmer T. und G. Hanko:
High strength brazing sheet with improved corrosion resistance. 8th International Brazing Congress, Düsseldorf, Deutschland, 2014

Luidold S.:
Optimierung des Recyclingsystems für “seltene” Metalle. Re-source. Wien, Österreich, 2014

Pichler C.:
Alternative Verfahren zur Aufarbeitung von Stäuben aus der Stahlindustrie. Mineralische Nebenprodukte und Abfälle, Berlin, Deutschland, 2014

Pichler C.:
Steel Mill Dust Recycling through the “2sDR Process”. COM 2014. Vancouver, Kanada, 2014

Pirker A.:
Characterisation of Aluminium chips. Aluminium 2014 Confernce. Düsseldorf, Deutschland, 2014

Pogatscher S., H. Antrekowitsch, M. Werinos, B. Prillhofer und P. Uggowitzer:
Optimierung der Wärmebehandlung von Aluminiumwerkstoffen der 6xxx Familie. 8. Ranshofener Leichtmetalltage. Geinberg, Österreich, 2014

Pogatscher S., M. Werinos, H. Antrekowitsch und P. Uggowitzer:
The role of vacancies in the aging of Al-Mg-Si alloys. ICAA13. Trondheim, Norwegen, 2014

Pogatscher S., S. Gerstl, J. Löffler und P. Uggowitzer:
Atom probe tomography investigations of modified early stage clustering in Si containing aluminum alloys. ISPMA 13. Prag, Tschechien, 2014

Pogatscher S.:
Measurement & Interpretation of minority solutes in Al alloys. ScopeM APT Roundtable workshop (ETH Zürich). Zürich, Schweiz, 2014

Poscher A.:
Extraction of lanthanides from spent polishing agent. ERES 2014-1st International Conference on European Rare Earth Resources. Milos, Griechenland, 2014

Poscher A.:
Recyling von Seltenen Erden sowie Antimon aus Reststoffe. Forum für Metallurgie und Werkstofftechnik. Leoben, Österreich, 2014

Rumpold R.:
Integrated recycling strategies for flue dust from the secondary copper production. 73th copper committee, Stolberg, Germany

Rumpold R.:
Strategies to recover the valuable metal fraction from flue dust of the secondary copper production. Shechtman International Symposium 2014, Cancun, Mexico, 2014

Rösler G.:
Recycling of metallurgical wastes by a sustainable ironbath process with special focus on the carburization step. MultiScience – XXVIII microCAD International Multidisciplinary Scientific Conference. Miskolc, Ungarn, 2014

Rösler G.:
Recycling of metallurgical wastes by a sustainable ironbath process. Shechtman International Symposium. Cancun, Mexiko, 2014

Sobotka C.:
Burnt to a crisp? – Why oxygen enhanced combustion doesn’t have to influence steel oxidation. Shechtman International Symposium. Cancun, Mexiko, 2014

Sobotka C.:
The influence of oxygen enriched burner systems on the scale formation of steel alloys during heating processes. AISTech. Indianapalis, USA, 2014

Sorger C.:
Auswirkungen der Pyrolyse von Elektronikschrotten auf die metallurgische Weiterverarbeitung. Forum für Metallurgie und Werkststofftechnik, Leoben, Österreich

Steinlechner S.:
Environmentally friendly recycling of automotive catalysts in a closed hydrometallurgical loop. Hydrometallurgy 2014, Victoria, Canada

Steinlechner S.:
Recycling of PGM containing catalysts by a hydrometallurgical closed loop process with an optional cerium recovery. IPMI International Precious Metals Institute – Conference 2014, Orlando, Florida

Stuhlpfarrer P.:
Recovery Of Technology Metals From A WEEE-fraction. 2nd Int. Symp. on Sustainable Materials Recycling Processes and Products, Shechtman International Symposium, Cancun, Mexiko, 2014

Unger A., S. Steinlechner und J. Antrekowitsch:
Upgrade of WOX with high energy solar radiation. XXVIII microCAD International Multidisciplinary Scientific Conference, Miskolc, Ungarn, 2014

Unger A.:
Developing a recycling process for simultaneous recovery of valuables from a dumped slag. Shechtman International Symposium. Cancun, Mexiko, 2014

Unger A.:
Simultaneous recovery of valuables form a dumped slag generated in the lead industry. 46th International October Conference on Mining and Metallurgy. Bor, Serbien, 2014

Werinos M.:
Influence of Sn-solubility on suppression of natural aging in an AA6061 aluminum alloy. Materials Science & Technology (MS&T) 2014, Pittsburgh, USA, 2014

Angerer T.:
Recycling potentials of the two refractory metals tantalum and niobium. EMC, Weimar, Deutschland, 2013

Antrekowitsch H.:
Einsatz minderwertiger Schrotte und Reststoffsituation beim Recycling von Aluminium. Berliner Recycling- und Rohstoffkonferenz, Berlin, Germany, 2013

Antrekowitsch H.:
Energiebedarf beim Recycling und der Primärmetallurgie von Nichteisenmetalle. Stahlwerksausschuss der ASMET, Ranshofen, Österreich, 2013

Antrekowitsch H.:
Energy and resource efficiency at the recycling of nonferrous metals. Synergy Platform 2013 der voestalpine. Energy and Resource Efficiency, 2013, Leoben, Österreich

Antrekowitsch H.:
Herausforderung Kreislaufwirtschaft – Beispiele aus der Praxis. Herausforderung Rohstoffknappheit, Dornbirn, Österreich, 2013

Antrekowitsch H.:
Nachhaltige Rohstoffversorgung. Energie- und Ressourceneffizienz bei der Erzeugung von Nichteisenmetallen. ÖIAV-Seminar, Leoben, Österreich, 2013

Antrekowitsch H.:
Recycling und Ressourcen – Fakten und Potenziale. Workshop Green Tech Research Styria, Graz, Österreich, 2013

Antrekowitsch H.:
Ressourcen und Recycling – eine europäische Herausforderung. Urania, Grenzen des Wachstums, Graz, Österreich, 2013

Antrekowitsch H.:
Reststoffe aus der Aluminium-Sekundärindustrie. Berliner Schlackenkonferenz, Berlin, Deutschland, 2013

Antrekowitsch J. und C. Pichler:
Status of the two step process for the recycling of EAF-dusts. 61st Zinc Experts Committee Meeting, Leoben, 22 – 23 October 2013

Antrekowitsch J.:
Amelioration of Secondary Zinc Oxide, Part I. International Zinc Conference and 2013 Zinc Oxide Industry Conference, Cancun, 2013

Antrekowitsch J.:
Recovery of Zinc and Iron from Steel Mill Dusts by the use of a TBRC. A possible Mini-mill Solution?. REWAS, San Antonio 2013

Antrekowitsch J.:
The Potential of Lead Recycling from Steel Mill Residues. 3rd Secondary Lead Conference, Singapur 2013

Antrekowitsch J.:
Zinc, Lead and Silver Recycling from Complex Residues, Recycling Metals from Industrial Waste. Colorado School of Mines, Golden, 2013

Kaindl M.:
Investigation on different recycling concepts for rare earth containing magnets from WEEE. EMC, Weimar, Deutschland, 2013

Kaindl M.:
Recycling of NiMH batteries by precipitation of the rare earths with oxalic acid. Fachaussschuss für Sondermetalle der GDMB 2013, Reutte, Österreich

Luidold, S.:
New approaches for recovery of critical metals. Beacon Conference – Optimising Collection and Recycling of WEEE, Düsseldorf, 2013

Luidold, S.:
Potenzial und Technologien zum Recycling von kritischen Rohstoffen. BME-Forum: Rohstoffversorgung aktuell, Wien, 2013

Luidold S. und A. Poscher:
Extraction of Cerium and Lanthanum from Spent Glass Polishing Agent. Materials Science & Technology (2013), Montréal, Kanada

Luidold S.:
Einsatz von Reststoffen zur Herstellung von Ferrolegierungen. Forum für Metallurgie und Werkstofftechnik, Leoben, Österreich, 2013

Luidold S.:
Kritische Rohstoffe für die Hochtechnologieanwendung in Österreich. Endpräsentation zur Studie, BMVIT, Wien, Österreich, 2013

Luidold S.:
Kritische Rohstoffe in der Hochtechnologieanwendung. Recycling von Metallen und kritischen Rohstoffen, Leoben

Luidold S.:
Recycling von Seltenen Erden aus Sekundärrohstoffen. Berliner Recycling und Rohstoffkonferenz, Berlin, Germany, 2013

Luidold S.:
Sicherung von kritischen Rohstoffen für die österreichische Industrie. Vortragsreihe TU Wien, Wien, 15.04.2013

Luidold S.:
Supply and demand for REM, natural resources, price trends, current and future use of REM. Take-Back Conference, Prag, 2013

Pichler C. und A. Unger:
Rückgewinnung von Wertmetallen aus Stahlwerksstäuben durch ein reduzierendes Metallbad. -Schlacken-Stäube, 23.-24. September, Berlin, Deutschland, 2013

Pichler C., G. Schneeberger und J. Antrekowitsch:
Treatment and Application of slags from Recycling Process of Metal Industry Residues. EMC, Weimar, Deutschland, 2013

Pichler C.:
INNOVATIVE RECYCLINGSLAG-TREATMENT. WASTES, 11.-13. September, Braga, Portugal, 2013

Pichler C.:
SLAGS FROM METAL RECYCLING PROCESSES AS INNOVATIVE SECONDARY RESOURCE. Proc. Of 9th Global Slag (2013), Dubai, Vereinigte Arabische Emirate

Pichler C.:
Utilization of Residues from the Iron and Steel Industry with main Focus on Filter Dusts. microCad International Scientific Conference, 21.-22. March, Miskolc, Hungary, 2013

Pirker A., H. Antrekowitsch, M. Kettner, W. Fragner und H. Suppan:
Recycling of Aluminium Scrap with Organic Load. EMC, Weimar, Deutschland, 2013

Pirker A.:
Charakterisierung ausbeuterelevanter Substanzen beim Schmelzen von Aluminiumschrotten. Leichtmetallfachausschuss der GDMB, Székesfehérvar, Ungarn, 2013

Pogatscher S. und P. Uggowitzer:
Understanding and solving the negative effect of natural aging on the artificial aging of Al-Mg-Si alloys. Thermec ‘2013, Las Vegas, USA, 2013

Pogatscher S., H. Antrekowitsch und P. Uggowitzer:
Linking the effect of solute super-saturation and room temperature storage on artificial aging of Al-Mg-Si alloys. Euro LightMAT Conference 2013, Bremen, Deutschland, 2013

Pogatscher S., H. Antrekowitsch, M. Werinos, F. Moszner, S. Gerstl, M. Francis, W. Curtin und P. Uggowitzer:
Aging of trace element modified Al-Mg-Si alloys. 2nd European Atom Probe Workshop, Zürich, Schweiz, 2013

Pogatscher S., J. Löffler und P. Uggowitzer:
First findings on au-based bulk metallic glasses. 1. Flash DSC 1 Conference, Greifensee, Schweiz, 2013

Poscher A.:
Leuchtstoffe-Sekundärrohstoff für die Produktion Seltener Erden. Forum Licht-Green Photonics, Graz, Österreich, 2013

Poscher A.:
Recovery of Rare Earths from Residues of the Glass Industry by Hydrochloric Acid. EMC, Weimar, Deutschland, 2013

Poscher A.:
Recycling of Rare Earths from Spent Phosphors. EMC, Weimar, Deutschland, 2013

Poscher A.:
Rückgewinnung von Antimon aus einem metallischen Reststoff. 46. Metallurgisches Seminar, Joachimsthal, Deutschland, 2013

Rumpold R. und J. Antrekowitsch:
Removal of Halogens in Heavy Metal containing Flue Dust from the Secondary Copper Production. EMC, Weimar, Deutschland, 2013

Rumpold R. und J. Antrekowitsch:
Zinc in the copper secondary production and potential recycling technologies. Copper 2013, Santiago, Chile, S. 265 – 280

Rösler G. und J. Antrekowitsch:
Sustainable Carbonization of Iron Bath by Utilization of Renewable Bio-Char. EMC, Weimar, Deutschland, 2013

Rösler G.:
Metallurgie mit nachwachsenden Rohstoffen. Berliner Recycling- und Rohstoffkonferenz, Berlin, Germany, 2013

Rösler G.:
Special designed charcoal for an environmental friendly heavy metal recycling. Carbon 2013, Rio de Janeiro, Brasilien, 2013

Schlögl C.:
Auswirkungen von Legierungs- und Verunreinigungselementen auf die Zerspanungseigenschaften und Eloxierbarkeit von sekundären Al-Knetlegierungen. Leichtmetallfachausschuss der GDMB, Székesfehérvar, Ungarn, 2013

Schlögl C.:
Influence of impurities in secondary aluminium on machinability and anodizing behaviour. EMC, Weimar, Deutschland, 2013

Sobotka C.:
Investigation of the Scale Formation of a Chromium and Molybdenum containing Steel Alloy in an Oxipyr®-oxyfuel combusted Reheat Furnace. EMC, Weimar, Deutschland, 2013

Steinlechner S. und J. Antrekowitsch:
PGM recycling from catalysts in a closed hydrometallurgical loop with an optional cerium recovery. REWAS TMS 2013, San Antonio, USA, 2013

Steinlechner S.:
A hydrometallurgical concept for PGM recycling from catalysts – From a mass balance to economic considerations, Precious Metals. he Precious Metals Development Network (PMDN), Cape Town, South Africa, 2013

Steinlechner S.:
Amelioration of Secondary Zinc Oxide, Part II. nternational Zinc Conference and 2013 Zinc Oxide Industry Conference, Cancun, 2013

Steinlechner S.:
Verification of a process concept for the simultaneous recovery of valuable metals from lead slag. 3rd Secondary Lead Conference, Singapur 2013

Stuhlpfarrer P.:
Recycling Potential of Special Metals like Indium, Gallium and Germanium. EMC, Weimar, Deutschland, 2013

Stuhlpfarrer P.:
Recyclingkonzepte zur Rückgewinnung von Massen- und Technologiemetallen aus E-Schrotten der Kategorie 3. 46. Metallurgisches Seminar, Joachimsthal, Deutschland, 2013

Unger A. und J. Antrekowitsch:
Reforming of a Zinc Containing Gas Mixture with Steam for the Generation of ZnO and H2. EMC, Weimar, Deutschland, 2013

Unger A., G. Schneeberger, C. Pichler und J. Antrekowitsch:
Investigations on a recycling process for residues from steel industry. microCad International Scientific Conference, Miskolc, Ungarn, 2013

Unger A., S. Steinlechner und J. Antrekowitsch:
Zinc oxide quality upgrade by a clinkering process obtained from recycling of secondary resources. Recycling of Non-Ferrous metals, Krakau, Polen, 2013

Unger A.:
Recovery of valuables (Zn, Pb and Ag) from a dumped slag generated in the lead-, zinc-production. WASTES, 11.-13. September, Braga, Portugal, 2013.

Unger A.:
Rückgewinnung von Wertmetallen (Zn, Pb und Ag) aus Reststoffen der Blei- und Zinkindustrie. Aschen-Schlacken-Stäube, 23.-24. September, Berlin, Deutschland, 2013

Werinos M.:
Influence of Microalloying Elements on the Negative Effect of Natural Pre-Aging on Artificial Aging in Al-Mg-Si Alloys. Euro LightMAT Conference 2013, Bremen, Deutschland, 2013

Agirre Arisketa I., T. Griessacher, A. Adrados, J. Requies, J. Cambra und J. Antrekowitsch:
Catalytic upgrading of biomass pyrolysis vapors to bio-syngas, a possible reducing agent for metallurgical processes. 4th International Conference on Engineering for Waste and Biomass Valorisation, Porto, Portugal, 2012

Agirre Arisketa I., T. Griessacher, G. Rösler und J. Antrekowitsch:
A Sustainable Process Development for Biomass Conversion into Charcoal for Metallurgical Processes. BIT´s 2nd Annual World Congress of Bioenergy, Xi’an, China, 2012.

Angerer T. und H. Antrekowitsch:
Werkstoffe und Metallphysik in der Aeronautik (Teil 4). Ausbildungsseminar in der Fliegerwerft 2, Zeltweg, Österreich, 2012

Angerer T. und R. Schledjewski:
Werkstoffe und Metallphysik in der Aeronautik (Teil 3). Ausbildungsseminar in der Fliegerwerft 2, Zeltweg, Österreich, 2012

Angerer T.:
Werkstoffe und Metallphysik in der Aeronautik (Teil 5). Ausbildungsseminar in der Fliegerwerft 2, Zeltweg, Österreich, 2012

Antrekowitsch H.:
Effiziente Ressourcen- und Rohstoffnutzung – eine Voraussetzung zur Sicherung des Wirtschaftsstandortes Österreichs. Intelligente Produktion, Info Day, Wien, Österreich, 2012

Antrekowitsch H.:
Herstellungsverfahren bei der Erzeugung von Ferrolegierungen. Stahlwerksausschuss der ASMET, Althofen, Österreich, 2012

Antrekowitsch H.:
Recycling von nichteisenmetallhaltigen Reststoffen. Symposium Rohstofflogistik, Leoben, Österreich, 2012

Antrekowitsch H.:
Stand der Wissenschaft – kritische Rohstoffe. Informationsworkshop: Beitrag der Abfallwirtschaft zur Versorgungssicherheit seltener Rohstoffe, Leoben, Österreich, 2012

Antrekowitsch H.:
Wasserstoffnutzung – Rahmenbedingungen, Stand der Technik, Potenzial. Risiko: dialog, Grüner Wasserstoff – Zukunft der Energieversorgung?,. Österreichische Akademie der Wissenschaften, Wien, Österreich, 2012

Antrekowitsch H.:
Zukünftige Herausforderungen beim Recycling von Aluminium. 7. Ranshofener Leichtmetalltage, Gmunden, Österreich, 2012

Antrekowitsch J.:
Effizientes Recycling von Reststoffen der metallerzeugenden Industrie. Der Weg zum Zero-Waste-Verfahren, Tag der Metallurgie, 2012, Goslar, Germany.

Antrekowitsch J.:
Energieeffizientes Metallrecycling, Simultane Rückgewinnung von Wertmetallen aus Reststoffen. Science Brunch, FFG, Klima und Energiefond, bm vit, 2012, Linz, Austria

Antrekowitsch J.:
Future perspectives in the recycling of complex residues. Recycling-Fachausschuss, Austrian Society of Metallurgy, 2012, Leoben, Austria

Antrekowitsch J.:
Optimierungspotentiale beim Recycling schwermetallhaltiger Rückstände. Berliner Recycling und Rohstoffkonferenz, Berlin, Germany, 2012.

Antrekowitsch J.:
Optimierungspotenziale bei Recycling von Schwermetallen. Cleantech Innovators Club, ECO World Styria, TU Graz, Austria, 2012, Graz, Austria.

Antrekowitsch J.:
Optimization Potentials in the recycling of complex industrial wastes. Institute of energy and technology, energy science center, ETH Zürich, 2012, Zürich, Switzerland

Antrekowitsch J.:
Process Development in the Recycling of metal containing industrial Wastes. PSU-IC 2012 Conference, Songkhla, Thailand, 2012

Griessacher T.:
Nutzungsoptionen von Biomasse im Metallrecycling. 45. Metallurgisches Seminar, Ulm, Deutschland, 2012

Kaindl M.:
Recycling von Magnetwerkstoffen unter besonderer Berücksichtigung von Seltenen Erden und Edelmetallen. Fachausschuss für Sondermetalle der GDMB, 2012

Luidold S. und R. Sarc:
Seltene Erden – Vorkommen und Rückgewinnung aus Abfällen. Österreichische Abfallwirtschaftstagung, Linz, Österreich, 2012

Luidold S.:
Concepts for the extraction of rare earths from spent phosphors. 51st Annual Conference of Metallurgists of CIM (COM 2012). Niagara, Ontario

Luidold S.:
Critical raw material for the high technological sector in Austria. ERSCP, Bregenz, Österreich, 2012

Luidold S.:
Kritische Rohstoffe für die Hochtechnologieanwendung in Österreich. Workshop zur Studie Kritische Rohstoffe, BMVIT, Wien, Österreich, 2012

Luidold S.:
Möglichkeiten des Recyclings von LEDs im Vergleich zu anderen Beleuchtungskörpern. 45. Metallurgisches Seminar, Ulm, Deutschland, 2012

Luidold S.:
The situation regarding critical raw materials for the high technological sector in Austria. European Mineral Resources Conference, Leoben, Österreich, 2012

Pirker A.:
Recycling of aluminium – improvement of the energy efficiency and optimization of secondary alloy. ACHEMA 2012, 30th World Exhibition Congress, Frankfurt am Main, Deutschland

Pogatscher S., H. Antrekowitsch, H. Leitner, D. Pöschmann, Z. Zhang und P. Uggowitzer:
influss einer unterbrochenen Abschreckung auf die Warmauslagerung von Al-Mg-Si Legierungen. Forum für Metallurgie und Werkstofftechnik, Leoben, Österreich, 2012

Pogatscher S.:
The Role of Co-Clusters in the Artificial Aging of AA6061 and AA6060. TMS 2012 141 th TMS Annual Meeting & Exhibition, Orlando, USA, 2012

Poscher A.:
Elektrolyse von Lösungen aus der Aufbereitung von NiMeH-Akkus. Forum für Metallurgie und Werkstofftechnik, Leoben, Österreich, 2012

Poscher A.:
Extraction of rare earths from spent phosphors. GDMB Fachausschuss Sondermetalle, Hoboken, Belgien, 2012

Poscher A.:
Konzepte zur Gewinnung von Seltenen Erden aus Leuchtstoffen. DepoTech 2012, Leoben, Österreich, 2012

Rumpold R.:
Recycling of PGMs from Spent Automotive Catalysts. State of the Art and Future Perspectives. XXVI. microCAD International Scientific Conference, Miskolc, Hungary, 2012.

Rumpold R.:
Recycling of Platinum Group Metals from Automotive Catalysts by an Acidic Leaching Process. 5th Platinum Conference “A Catalyst for Change”, Sun City, South Africa, 2012.

Rumpold R.:
Simultaneous recovery of valuable metals from automotive catalysts through hydrometallurgical processing. 51st Annual Conference Of Metallurgists, Niagara Falls, Canada, 2012

Rumpold R.:
Zinc in the copper industry. 60th Zinc Experts Committee Meeting, Marl, Germany, 2012

Schneeberger G., J. Antrekowitsch und C. Pichler:
Die Verwertung von Hüttenreststoffen aus der Eisen- und Stahlindustrie mit Schwerpunkt Filterstäube. Das XII. Internationale Symposium Entschwefelung von Roheisen und Stahl, Almamet GmbH, 19.-22. September, Wien, Österreich, 2012

Schneeberger G.:
Implementation of a previous purification step in course of the recycling of filter dusts from the iron and steel industry. XXVI. microCad International Scientific Conference, Miskolc, Ungarn, 2012

Sobotka C.:
High Temperature Oxidation of Metals. European Metallurgy Meeting 2012, Gumpoldskirchen, Österreich

Stadler F., H. Antrekowitsch, W. Fragner, H. Kaufmann und P. Uggowitzer:
The effect of Nickel on the thermal conductivity of Al-Si foundry alloys. 13th International Conference on Aluminum Alloys (ICAA13) , Pittsburgh, Vereinigte Staaten (USA)

Stadler F.:
The influence of solution treatment on the high-temperature strength of Al-Si foundry alloys with Ni. TMS 2012 141 th TMS Annual Meeting & Exhibition, Orlando, USA, 2012

Steinlechner S.:
Influence of temperature and treatment time on the halide removal yield during clinkering. XXVI. microCad International Scientific Conference, Miskolc, Ungarn, 2012

Steinlechner S.:
Optimization possibilities in zinc recycling from residues. PSU-IC 2012 Conference, Songkhla, Thailand, 2012

Steinlechner S.:
The potential of secondary resources for covering future zinc and lead demands. EUMicon 2012, Leoben, Austria, 2012

Stuhlpfarrer P.:
Elektronikschrottrecycling. Recycling-Fachausschuss, Austrian Society of Metallurgy, 2012, Leoben, Austria

Angerer T. und H. Antrekowitsch:
Werkstoffe und Metallphysik in der Aeronautik (Teil 1). Ausbildungsseminar in der Fliegerwerft 2, Zeltweg, Österreich, 2011

Angerer T. und H. Antrekowitsch:
Werkstoffe und Metallphysik in der Aeronautik (Teil 2). Ausbildungsseminar in der Fliegerwerft 2, Zeltweg, Österreich, 2011

Angerer T.:
Anfall und Recyclingpotenzial von RFIDs. GDMB Fachausschuss Sondermetalle, Pforzheim, Deutschland, 2011

Angerer T.:
Development of a new process for tungsten soft scrap recycling. EMC, Düsseldorf, Deutschland, 2011

Antrekowitsch H.:
Metallgewinnung: Vom Bergbau zum “Urban Mining”. ÖWAV-Tagung, Wirtschaftsfaktor Schrott, Ressourcensicherung durch Stahl- und Metallrecycling, Linz, Österreich, 2011

Antrekowitsch H.:
Recycling von RFID-Komponenten. 9. Internationaler Leobener Logistik Sommer, Leoben, Österreich, 2011

Antrekowitsch H.:
Recycling von Sondermetallen als Beitrag zur Ressourcensicherheit in Europa. 1. Freiberger Ressourcentechnologie-Symposium, Freiberg, Deutschland, 2011

Antrekowitsch J.:
Melting Behavior Of Complex Zinc Containing Residues. International Symposium on Metals and Materials Processing in a Clean Environment (Fray Symposium), Cancun, Mexiko, 2011

Antrekowitsch J.:
New Perspectives in the Recycling of Dusts from Integrated Steel Mills. EMC, Düsseldorf, Deutschland, 2011

Brisberger R.:
Erzeugung längsnahtgeschweißter und feuerverzinkter Rohre bei Wuppermann in Judenburg. XXX. Verformungskundliches Kolloquium, Planneralm, Österreich, 2011

Brisberger R.:
Evolved market, evolved products: New galvanizing processes for competitive products. “il è piatto”, Giornata Tecnica, Brescia, Italien, 2011

Brisberger R.:
Zn-Al-Mg alloy coatings in the production process of Wuppermann. 3rd Seminar on Networking between Zinc and Steel, Leoben, Österreich, 2011

Brisberger R.:
Zn-Al-Mg alloy coatings in the production process of Wuppermann. EMC, Düsseldorf, Deutschland, 2011

Griessacher T.:
Alternative Reducing Agents in the Recycling of Heavy Metal-Containing Residues. EMC, Düsseldorf, Deutschland, 2011

Griessacher T.:
Biomasse als alternatives Reduktionsmittel in der Recyclingmetallurgie. Eröffnungskolloquium des Christian Doppler Labors für Optimierung und Biomasseeinsatz beim Recycling von Schwermetallen, Leoben, Österreich, 2011

Griessacher T.:
Einsatzmöglichkeiten von Biomasse in metallurgischen Prozessen. 20. Symposium Bioenergie – Festbrennstoffe, Regensburg, Deutschland, 2011

Griessacher T.:
Hydrogen rich and carbon neutral gas as reducing agent for heavy metal containing residues. TMS 2011 140 th TMS Annual Meeting & Exhibition, San Diego, USA, 2011

Griessacher T.:
Utilization of Biomass at the Recycling of Heavy Metal Containing Wastes. 1st International Conference on WASTES: Solutions, Treatments and Opportunities (2011), Guimaraes, Portugal

Hoy C.:
Recycling of Secondary Materials for the Production of Ferroalloys. EMC, Düsseldorf, Deutschland, 2011

Kaindl M.:
Extraction of Rare Earths from Used Nickel Metal Hydride Batteries. EMC, Düsseldorf, Deutschland, 2011

Kaindl M.:
Recycling von NiMH-Akkus. Seltene Erden – Drohende Ressourcenknappheit?, Leoben, Österreich, 2011

Koch S.:
Effect of Ti or Zr additions on material characteristics of new lead-free Al-Cu-Mg-Sn alloys for machining purposes. EMC, Düsseldorf, Deutschland, 2011

Koch S.:
Influence of alloying elements on hard anodization layer formation on freemachining Al-Cu alloys. European Conference on Aluminium Alloys – ECAA 2011, Bremen, Deutschland, 2011

Luidold S.:
Optimized roasting for an improved soft scrap recycling. International Conference on Tungsten, Refractory & Hard Materials VIII, San Francisco, USA, 2011

Luidold S.:
Potenzielle sekundäre Rohstoffquellen von Seltenen Erden. Seltene Erden – Drohende Ressourcenknappheit?, Leoben, Österreich, 2011

Luidold S.:
Recycling von Sondermetallen. Recycling-Fachausschuss der ASMET, Althofen, Österreich, 2011

Luidold S.:
Red Mud – Hazardous Waste or Valuable Raw Material?. EMC, Düsseldorf, Deutschland, 2011

Pichler C. und C. Stock:
Optimierung eines Al-Drehspaltkeiles. 18th International Student’s Day of Metallurgy, Leoben, Österreich, 2011

Pirker A.:
Erzeugung von synthetischer Titanschlacke aus Ilmenit inklusive Marktstudie. 18th International Student’s Day of Metallurgy, Leoben, Österreich, 2011

Pogatscher S.:
Development of a coating process for copper strips with appropriate lead-free solders. EMC, Düsseldorf, Deutschland, 2011

Pogatscher S.:
Einfluss einer unterbrochenen Abschreckung auf die Warmauslagerung von Al-Mg-Si Legierungen. ASMET Fachausschuss für Leichtmetalle, Ranshofen Österreich, 2011

Pogatscher S.:
Influence of Direct Pre-aging on Artificial Aging of Al-Mg-Si Alloys. European Conference on Aluminium Alloys (ECAA). Bremen, Deutschland, 2011

Pogatscher S.:
Influence of Interrupted Quenching on Artificial Aging of Al-Mg-Si Alloys. Aluminum Modeling Group Workshop, Wien, Österreich, 2011

Poscher A.:
Aufbereitung von Nickelmetallhydridakkus zur Wiedergewinnung Seltener Erden. 18th International Student’s Day of Metallurgy, Leoben, Österreich, 2011

Schneeberger G.:
Characterization and Reduction of Filter Dusts in the Liquid Phase. 50th Annual Conference of Metallurgists (COM 2011), Montreal, Kanada, 2011

Schneeberger G.:
Characterization and new Investigations on a 2-Step Process for the Treatment of high Zinc containing Steel Mill Dusts. Zinc Experts Meeting, Nordenham, Deutschland, 2011

Schneeberger G.:
Characterization of Dusts from BOF-Steelmaking and Foundry Industry. XXV. microCad International Scientific Conference, Miskolc, Ungarn, 2011

Schneeberger G.:
Characterization of Typical Dusts from Steel and Foundry Industry. 3rd Seminar on Networking between Zinc and Steel, Leoben, Österreich, 2011

Schneeberger G.:
New developments in the recycling of zinc containing dusts from steel and foundry industry. EMC, Düsseldorf, Deutschland, 2011

Schneeberger G.:
Verfahrensentwicklung in Kombination mit Problemstellungen der Feuerfesttechnik beim Recycling komplexer Rückstände. Eröffnungskolloquium des Christian Doppler Labors für Optimierung und Biomasseeinsatz beim Recycling von Schwermetallen, Leoben, Österreich, 2011

Schnideritsch H.:
Charakterisierung von komplexen Reststoffen. Eröffnungskolloquium des Christian Doppler Labors für Optimierung und Biomasseeinsatz beim Recycling von Schwermetallen, Leoben, Österreich, 2011

Stadler F.:
Der Einfluss von Nickel auf die Warmfestigkeit von AlSi-Gusslegierungen. Jahrestagung des GDMB-Leichtmetall-Fachausschuss, Quedlinburg, Deutschland, 2011

Stadler F.:
The effect of Ni on the high-temperature strength of Al-Si cast alloys. 5th International Light Metals Technology Conference, Lüneburg, Deutschland, 2011

Stadler F.:
The effect of solution treatment on the high-temperature strength of Al-Si cast alloyst with Ni. ECAA 2011 – European Conference on Aluminium Alloys, Bremen, Deutschland, 2011

Steinlechner S.:
Hydro- and Pyrometallurgical Options for the Upgrading of Low Grade Secondary Zinc Oxides. EMC, Düsseldorf, Deutschland, 2011

Steinlechner S.:
Investigations In The Improvement Of Recycling Of Electric Arc Furnace Dusts. International Symposium on Metals and Materials Processing in a Clean Environment (Fray Symposium), Cancun, Mexiko, 2011

Steinlechner S.:
Investigations in Clinkering for the Removal of Halogens from Secondary Zinc Oxides. XXV. microCad International Scientific Conference, Miskolc, Ungarn, 2011

Steinlechner S.:
Möglichkeiten und Entwicklungen zur Erhöhung der Produktqualität im Recycling zinkhaltiger Reststoffe. Eröffnungskolloquium des Christian Doppler Labors für Optimierung und Biomasseeinsatz beim Recycling von Schwermetallen, Leoben, Österreich, 2011

Steinlechner S.:
Options for Halogen Removal from Secondary Zinc Oxides. 3rd Seminar on Networking between Zinc and Steel, Leoben, Österreich, 2011

Steinlechner S.:
Possibilities for the Improvement of Secondary Zinc Oxide Quality. 50th Annual Conference of Metallurgists (COM 2011), Montreal, Kanada, 2011

Angerer T.:
Rückgewinnung von Wolfram aus Reststoffen – Modellierung der ammoniakalischen Laugung. GDMB Fachausschuss Sondermetalle, Freiberg, Deutschland, 2010

Antrekowitsch H.:
Entstehung und Entsorgung von Rotschlamm. DepoTech, Leoben, Österreich, 2010

Antrekowitsch H.:
Stoffströme beim Recycling von Metallen unter besonderer Berücksichtigung der anfallenden Reststoffe. 8. Internationaler Leobener Logistik Sommer, Leoben, Österreich, 2010

Antrekowitsch J.:
Characterization of Zinc Containing Residues from Copper and Zinc Industry. XXIV. microCad International Scientific Conference, Miskolc, Ungarn, 2010

Antrekowitsch J.:
Characterization of Zinc Containing Residues from Nonferrous Industry. 49th Annual Conference of Metallurgists (COM 2010), Vancouver, Kanada, 2010

Antrekowitsch J.:
Evaluation and Recycling Potential of Different Zinc Containing Residues from Metallurgical Industry. 49th Annual Conference of Metallurgists (COM 2010), Vancouver, Kanada, 2010

Antrekowitsch J.:
Marktfähigkeit und alternative Einsatzbereiche von technischem Zinkoxid aus der Aufarbeitung von Stahlwerksreststoffen. Logistik in Leoben – Vernetzung von Praxis, Forschung und Lehre, Leoben, Österreich, 2010

Griessacher T.:
Alternative gaseous reducing agents in the recycling of zinc containing residues. Zinc Experts Meeting, Forde, Norwegen, 2010

Griessacher T.:
Bio-char respectively Bio-coke from Agricultural Wastes for Metallurgical Uses. 18th European Biomass Conference and Exhibition From Research to Industry and Markets, Lyon, Frankreich, 2010

Koch S.:
Effects of varied Sn and Cu content in lead-free Al-Cu based alloys intended for free machining. 49th Annual Conference of Metallurgists (COM 2010), Vancouver, Kanada, 2010

Koch S.:
Untersuchungen von bleifreien Aluminium-Automatenlegierungen. Jahrestagung des Fachausschusses Leichtmetalle, Stubenberg, Deutschland, 2010

Konetschnik S.:
Recovery of Valuable Metals from Converter Slags by Reduction with Iron. Copper, Hamburg, Deutschland, 2010

Konetschnik S.:
Stoffströme und logistische Herausforderungen beim Elektronikschrottrecycling unter besonderer Berücksichtigung der metallurgischen Prozesse. Logistik in Leoben – Vernetzung von Praxis, Forschung und Lehre, Leoben, Österreich, 2010

Luidold S.:
Lithium – Rohstoffquellen, Anwendung und Recycling. 44. Metallurgisches Seminar, Hanau, Deutschland, 2010

Luidold S.:
Recycling von NiMeH-Akkus. GDMB Fachausschuss Sondermetalle, Freiberg, Deutschland, 2010

Luidold S.:
Rückgewinnung von Seltenen Erden aus Nickelmetallhydrid-Akkumulatoren. DepoTech, Leoben, Österreich, 2010

Paulitsch H.:
Vergleich des Abbrandverhaltens beim Recyceln von Aluminiumspänen und -briketts. ASMET Fachausschuss für Leichtmetalle, Leoben, Österreich, 2010

Pogatscher S.:
Mechanisms Controlling the Artificial Aging of Al-Mg-Si Alloys. 17th International Symposium on Metastable, Amorphous and Nanostructured Materials – ISMANAM2010, Zürich, Schweiz, 2010

Steinlechner S.:
Investigation in Simultaneous Recovery of Valuable Metals from Heavy-Metal Containing Residues. XXIV. microCad International Scientific Conference, Miskolc, Ungarn, 2010

Steinlechner S.:
Investigations and recycling principle for various zinc containing residues from metallurgical industry. Zinc Experts Meeting, Forde, Norwegen, 2010

Steinlechner S.:
Simultaneous Recovery of Various Metals from Zinc Containing Residues on a Reducing Metal Bath. 49th Annual Conference of Metallurgists (COM 2010), Vancouver, Kanada, 2010

Wagner C.:
Application of New Gas-Atomization System for Alloys and Chalcogenides. PowderMet2010 International Conference On Powder Metallurgy & Particulate Materials, Ft. Lauderdale, USA, 2010

Antrekowitsch H.:
Einfluss der europäischen Umweltgesetzgebung auf die Werkstoffentwicklung. 7. Werkstoffkongress, Leoben, Österreich, 2009

Antrekowitsch H.:
Metallrecycling in der Automobilindustrie – gesetzliche Rahmenbedingungen und technologische Herausforderungen. 53. Österreichische Giessereitagung, Salzburg, Österreich, 2009

Antrekowitsch H.:
Metallurgisches Recycling von metallhaltigen Reststoffen und Schrotten – eine verfahrenstechnische und rohstoffpolitische Herausforderung. Recycling und Rohstoffe, Berliner Recycling- und Rohstoffkonferenz, Berlin, Deutschland, 2009

Antrekowitsch H.:
Roadmap für Hochleistungswerkstoffe: Ressourcen. Forum für Metallurgie und Werkstofftechnik, Leoben, Österreich, 2009

Antrekowitsch J.:
Aktuelle Entwicklungen in der Aufarbeitung zinkhältiger Reststoffe aus der Stahl- und Nichteisenmetallurgie. 10. Recyclingfachausschuss der ASMET, Leoben, Österreich, 2009

Antrekowitsch J.:
Complex Heavy Metal Containing Wastes: Between Landfilling and Recycling. EMC, Innsbruck, Österreich, 2009

Antrekowitsch J.:
Developments in the Recycling of Heavy-Metal-Containing Wastes – Projects at the Department of Nonferrous Metallurgy/University of Leoben. GDMB´s Zinc-Experts-Meeting, Kokkola, Finnland, 2009

Antrekowitsch J.:
Group People Dancing At Party Forschung im Bereich der Vernetzung von Zink und Stahl an der NE-Metallurgie der Montanuniversität Leoben. 2. Seminar – Vernetzung von Zink und Stahl, Leoben, Österreich, 2009

Antrekowitsch J.:
The current status of recycling of electric arc furnace dusts and perspectives for the future. XXIII. microCAD International Scientific Conference, Miskolc, Ungarn, 2009

Griessacher T.:
Biomass as Reducing Agent in the Metallurgy. EMC, Innsbruck, Österreich, 2009

Hackl A.:
Development of Zn-Al-Mg-alloys for Continuous Hot Dip Galvanising of Hot Rolled Steel Strip. EMC, Innsbruck, Österreich, 2009

Hacksteiner M.:
Nucleation of Copper on Tantalum in a Liquid Ammonia based Electrolyte. EMC, Innsbruck, Österreich, 2009

Koch S.:
Entwicklung bleifreier Al-Automatenlegierungen für die Automobilindustrie. 7. Werkstoffkongress, Leoben, Österreich, 2009

Konetschnik S.:
Influence and Investigation of the Parameters on the Gas Concentration in liquid Copper at Foundry Furnaces. EMC, Innsbruck, Österreich, 2009

Konetschnik S.:
Recovery of Copper and Precious Metals from Shredder Residues. EMC, Innsbruck, Österreich, 2009

Konetschnik S.:
Verwertungsstrategien für metallhaltige Reststoffe. 10. Recyclingfachausschuss der ASMET, Leoben, Österreich, 2009

Luidold S.:
RSA Research Studio Austria – Reycling von Sondermetallen. 10. Recyclingfachausschuss der ASMET, Leoben, Österreich, 2009

Luidold S.:
Tantalum and Niobium Powders for Electrolytic Capacitors. EMC, Innsbruck, Österreich, 2009

Luidold S.:
Two-Fluid Atomisation: Factors and Effects Influencing the Spraying of a Liquid Sheet. EMC, Innsbruck, Österreich, 2009

Offenthaler D.:
Combined remelting of Waelz slag and retort residues. EMC, Innsbruck, Österreich, 2009

Offenthaler D.:
Options to Avoid the hot acid Leaching Process in Zinc Hydrometallurgy. EMC, Innsbruck, Österreich, 2009

Pucher P., H. Antrekowitsch, H. Böttcher, H. Kaufmann und P. Uggowitzer:
Optimierung des Eigenschaftsprofils der Aluminiumgusslegierung AlSi9Cu3 innerhalb der Legierungstoleranz. Leichtmetall-Fachausschuss der GDMB, Hamburg, Deutschland, 2009

Pucher P., H. Böttcher, H. Kaufmann, H. Antrekowitsch und P. Uggowitzer:
Effect of compositional variations on the mechanical and fluidity performance of the aluminum cast alloy AlSi9Cu3. 1st World PhD Foundry Conference (2009), Brünn, Tschechien

Ressel R.:
Influence of Additional Burden Mixing at the Production of Ferromolybdenum. EMC, Innsbruck, Österreich, 2009

Schnideritsch H.:
Characterisation, Melting and Reduction Behaviour of Heavy Metal Containing Residues. EMC, Innsbruck, Österreich, 2009

Schnideritsch H.:
Schmelz- und rasterelektronenmikroskopische Untersuchungen an Stäuben aus der Stahlindustrie. 2. Seminar – Vernetzung von Zink und Stahl, Leoben, Österreich, 2009

Suppan H., H. Böttcher, H. Kaufmann, P. Pucher und H. Antrekowitsch:
Einfluss der chemischen Zusammensetzung der Gusslegierung AlSi9Cu3 auf die mechanischen und gießtechnologischen Eigenschaften. Deutscher Giessereitag, 100 Jahre Verein Deutscher Giessereifachleute, Berlin, Deutschland, 2009

Wagner C.:
New Processes for the Production of Tin Chalcogenides. EMC, Innsbruck, Österreich, 2009

Wenzl C.:
Investigations on Anode Casting Wheels to Optimise Anode Quality. EMC, Innsbruck, Österreich, 2009

Zunko H.:
Investigations on Cracking Behaviour of Zn-Al-Mg-Coatings on Sheet Steel. EMC, Innsbruck, Österreich, 2009

Zunko H.:
Investigations on the Cracking Mechanism of Zn-based Coatings on Sheet Steel. MPPE Workshop, Leoben, Österreich, 2009

Zunko H.:
Zn-Al-Mg-Coatings with Higher Corrosion Resistance. Zinc Experts Meeting, Kokkola, Finnland, 2009

Antrekowitsch H.:
Aluminiumforschung an den Universitäten. Aluminium 2008, 7. Weltmesse und Kongress, Vortragsforum, Essen, Deutschland, 2008

Antrekowitsch H.:
Aufbereitung von metallhaltigen Reststoffen und Schrotten. Aufbereitungstechnisches Seminar, Leoben, Österreich, 2008

Antrekowitsch H.:
Charakterisierung von Reststoffen und Verfahrensoptimierung beim Recycling. 43. Metallurgisches Seminar der GDMB Gesellschaft für Bergbau, Metallurgie, Rohstoff- und Umwelttechnik, NE-Metallrecycling – Grundlagen und aktuelle Entwicklungen, Dortmund, Deutschland, 2008

Antrekowitsch H.:
Energie- und Klimapolitik: Risiken und Chancen für eine nachhaltige metallurgische Entwicklung. Forum für Metallurgie und Werkstofftechnik, Leoben, Österreich, 2008

Antrekowitsch H.:
Nichteisenmetallurgie an der Montanuniversität – Forschung und Lehre. 30. Tagung der GDMB Bezirksgruppe Süd in Leoben, Österreich, 2008

Antrekowitsch H.:
Nickel aus dem Kraubather Ultramafit im Vergleich zu weltweit angewandten Herstellungsverfahren. Montangeschichtliche Tagung Kraubath, Kraubath, Österreich, 2008

Antrekowitsch H.:
Titanium and magnesium – materials in modern society. Conference of Automotive engineering – Trends in joining technology and materials science, Wels, Österreich, 2008

Antrekowitsch J.:
Behaviour of complex Residues from Steel Industry during Smelting and Reduction. microCAD 2008 International Scientific Conference, Miskolc, Ungarn, 2008

Antrekowitsch J.:
Characterization of Zinc Containing Residues from Metallurgical Processes. REWAS, Cancun, Mexiko, 2008

Antrekowitsch J.:
Fusion behaviour of zinc bearing steel mill dusts. 56th GDMB’s Zinc Experts Committee Meeting, Cagliari, Italien, 2008

Antrekowitsch J.:
Verhalten von Zinkverbindungen und Halogenen bei der Entstehung und Verarbeitung von Stahlwerksstäuben. Sitzung des Ausschusses für metallurgische Grundlagen des VDEh, Düsseldorf, Deutschland, 2008

Antrekowitsch J.:
Zinc Oxide from Recycling Processes as a Source for Electrolytic Galvanising. REWAS, Cancun, Mexiko, 2008

Koch S.:
Phasenuntersuchungen bei der Ausscheidungshärtung von Aluminiumlegierungen der Serie 6xxx und 7xxx. 74. Sitzung des ASMET-Werkstoffausschusses – Subcommitee for Heat Treatment and Hardening Techniques, Wels, Österreich, 2008

Luidold S.:
Prozess- und Produktentwicklungen im Bereich der Refraktärmetalle Niob, Tantal, Molybdän und Wolfram. Fachausschuss Sondermetalle, Goslar, Deutschland, 2008

Offenthaler D.:
Proposal for Avoiding the Hot Acid Leaching Process in Zinc-Hydrometallurgy by Partial-Reduction of the Roasted Concentrates. REWAS, Cancun, Mexiko, 2008

Offenthaler D.:
Pyrometallurgical treatment of Waelz Slag with retort residues. REWAS, Cancun, Mexiko, 2008

Offenthaler D.:
Smelting trials of retort residues and Waelz Slag in a TBRC. 56th GDMB’s Zinc Experts Committee Meeting, Cagliari, Italien, 2008

Potesser M.:
Highest Efficiency and Economic burner concepts for the metallurgical industry. Light Metals 2008 (TMS), New Orleans, USA, 2008

Potesser M.:
New Pyrometallurgical Bullion Lead Refining Process. TMS 2008 , New Orleans, USA, 2008

Prillhofer B.:
Mechanismen der Einschlussbildung bei der Legierung EN AW-7075. GDMB Leichtmetall-Fachausschuss, Aachen, Deutschland, 2008

Prillhofer B.:
Mikrostrukturelle Untersuchungen von Pb-freien Al-Cu-Legierungen. GDMB Leichtmetall-Fachausschuss, Aachen, Deutschland, 2008

Prillhofer B.:
Nonmetallic inclusions in the secondary aluminium industry for the production of aerospace alloys. Light Metals 2008 (The Minerals, Metals & Materials Society), New Orleans, USA, 2008

Prillhofer B.:
Optimisation of the melt quality in casting holding furnaces. Light Metals 2008 (The Minerals, Metals & Materials Society), New Orleans, USA, 2008

Prillhofer R.:
Einsatzmöglichkeit prozessbedingter Reststoffe beim Al-Recycling. Depotech, Leoben, Österreich, 2008

Ressel R.:
Untersuchung des Oxidationsverhaltens von Wertmetallen und Charakterisierung der anfallenden Schlacke am Beispiel der Ferrovanadiumherstellung. Fachausschuss Sondermetalle, Goslar, Deutschland, 2008

Antrekowitsch H.:
Einfluss der Aufbereitungstechnologie auf die Metallurgie. Recyclingfachausschuss der ASMET, Juni 2007, Amstetten, Österreich

Antrekowitsch H.:
Nonferrous metals at the recycling of electronic scrap – treatment and metallurgical processing. ECO-X: Sustainable Recycling Management & Recycling Network Centrope (2007), Wien, Österreich

Antrekowitsch H.:
Recycling von Magnesium in der Kfz-Industrie. Magna Workshop, Oktober 2007, Leoben, Österreich

Antrekowitsch J.:
The behavior of iron and zinc containing slags on an inductively heated coke bed. EMC, Düsseldorf, Deutschland, 2007

Koch S.:
Study of the precipitation kinetics in AlMgZn alloys by using DSC. EMC, Düsseldorf, Deutschland, 2007

Konetschnik S.:
Recovery of PGMs from spent catalyst material with a new HCl – H2SO4 leaching process. EMC, Düsseldorf, Deutschland, 2007

Konetschnik S.:
Themodynamic modelling of the behaviour of accompanying elements in secondary copper production. EMC, Düsseldorf, Deutschland, 2007

Luidold S.:
Production of Nb – powder by magnesiothermic reduction of niobium oxides in a cyclone reactor. EMC, Düsseldorf, Deutschland, 2007

Mubarok Z.:
Problems in the Electrolysis of Copper Anodes with high Contents of Nickel, Antimony, Tin and Lead. Copper/Cobre (2007), Toronto, Kanada

Paschen P.:
Heavy Nonferrous Metals in World Economy in the Last 50 Years. EMC, Düsseldorf, Deutschland, 2007

Potesser M.:
Burner Development Chamber for the Copper and Nonferrous Industry. Copper/Cobre (2007), Toronto, Kanada

Potesser M.:
The Elliptical Anode Furnace – A metallurgical Comparison – Part One. Copper/Cobre (2007), Toronto, Kanada

Potesser M.:
The Elliptical Anode Furnace – A metallurgical Comparison – Part One. Copper/Cobre (2007), Toronto, Kanada

Potesser M.:
The new elliptical anode furnace metallurgical compared with conventional copper anode furnaces. EMC, Düsseldorf, Deutschland, 2007

Prillhofer B.:
Innere Fehler in Walzbarren von Luftfahrtlegierungen. Institutskolloquium Nichteisenmetallurgie, Leoben, 2007

Prillhofer B.:
Lifetime assessment of cyclic thermo – mechanical loaded strip casting mills. EMC, Düsseldorf, Deutschland, 2007

Ressel R.:
Influence of the basicity and dwell time of slags on the oxidation state of vanadium ions. EMC, Düsseldorf, Deutschland, 2007

Wenzl C.:
Anode Casting – Chemical Anode Quality. Copper/Cobre (2007), Toronto, Kanada

Wenzl C.:
Anode Casting – Physical Anode Quality. EMC, Düsseldorf, Deutschland, 2007

Antrekowitsch J.:
Inducarb – A new reducing Facility for various Oxidic. Sohn International Symposium (2006), San Diego, Californien, USA

Antrekowitsch J.:
Present Status of the Reco Dust Process for the Recycling of Zinc containing Steel Mill Dusts. Zinc Experts Meeting, Düsseldorf, Deutschland, 2006

Antrekowitsch J.:
Problemstellungen und Lösungsansätze in der Aufarbeitung zinkhältiger Stahlwerksstäube. Vernetzung von Zink und Stahl. 42. Metallurgisches Seminar der GDMB (2006), Leoben, Österreich

Antrekowitsch J.:
Recycling of Platinum from spent Catalysts. Sohn International Symposium (2006), San Diego, Californien, USA

Koch S.:
From Bauxite to Secoundary Aluminium – Consumption and Sustainable Development: A World-Wide Survey. Aluminium 2006: International Symposium on Aluminium: From Raw Materials to Applications as held at the 45th Annual Conference of Metallurgists of CIM (COM 2006), Montreal, Kanada, 2006

Koch S.:
Homogenisierung von 6xxx Legierungen – Korrelation mit den Festigkeitseigenschaften. ASMET-Werkstoffausschuss – Subcommittee for Heat Treatment and Hardening Techniques (2006), Leoben, Austria

Koch S.:
Investigation of the Correlation between Homogenisation and Tensile Properties of AlMgSi-Alloys. Aluminium 2006: International Symposium on Aluminium: From Raw Materials to Applications as held at the 45th Annual Conference of Metallurgists of CIM (COM 2006), Montreal, Kanada, 2006

Konetschnik S.:
Porous Plugs for Gas Purging in the Aluminium Industry. Aluminium 2006: International Symposium on Aluminium: From Raw Materials to Applications as held at the 45th Annual Conference of Metallurgists of CIM (COM 2006), Montreal, Kanada, 2006

Mubarok Z.:
Metallographic Characterisation of Cathode Nodulation Behaviour in Copper Electrolytic Refining. 13. Intern. Studententag der Metallurgie (2006), Leoben, Österreich

Offenthaler D.:
Fluor- und Chlor-Problematik beim Recycling zinkhältiger Stahlwerksstäube. Vernetzung von Zink und Stahl. 42. Metallurgisches Seminar der GDMB (2006), Leoben, Österreich

Offenthaler D.:
Fluor- und Chlor-Problematik beim Recycling zinkhältiger Stahlwerksstäube. Vernetzung von Zink und Stahl. 42. Metallurgisches Seminar der GDMB (2006), Leoben, Österreich

Potesser M.:
A comparison of conventional copper anode furnaces with the new elliptical anode furnace concept. Sohn International Symposium (2006), San Diego, Californien, USA

Potesser M.:
Charakterisierung der Phasensäume beim Schweißen von Stahl und Aluminium. Interne Zukunftsgespräche Hybridschweißen von Stahl und Aluminium (2006), Linz, Österreich

Potesser M.:
Metallurgical Recycling of Electronic Scrap. TMS Annual Meeting & Exhibition (2006), San Antonio, USA

Potesser M.:
Oxygen Applications in the metallurgy. Expodonbass (2006), Donetsk, Ukraine

Potesser M.:
Recycling of Oxidic Waste from the Ferroalloy Production. TMS Annual Meeting & Exhibition (2006), San Antonio, USA

Potesser M.:
The Characterization of the Intermetallic Fe-Al Layer of Steel-Aluminium Weldings. TMS Annual Meeting & Exhibition (2006), San Antonio, USA

Prietl T.:
Erhöhung der Produktivität bestehender metallurgischer Reaktoren durch den Einsatz eines Spülsystems und Optimierung des feuerfesten Zustellungspakets – Schwerpunkt Kupfermetallurgie. ASMET – Forum für Metallurgie und Werkstofftechnik (2006), Leoben, Österreich

Seebacher H.:
Recycling von Aluminium und Magnesium in der Automobilindustrie. Recyclingfachausschuss (2006), Graz, Österreich

Wenzl C.:
Aufarbeitung von verunreinigten Sn-Schrotten und Sn-hältigen Reststoffen. Depotech (2006), Leoben Austria

Antrekowitsch H.:
Demontage, Verwertung und Entsorgung von EAG’s. eco-X: ecology and economy in electroniX (2005). Wien, Österreich

Antrekowitsch H.:
Process optimisation and element distribution at the converter in the secondary copper metallurgy. Kupferfachausschuss 2005, Hamburg, Deutschland

Antrekowitsch H.:
Process optimisation and quality improvement by gas-purging in the Al-industry. Light Metals Technology 2005

Antrekowitsch H.:
Recycling of copper and noble metals from electronic waste. eco-X: ecology and economy in electroniX (2005). Wien, Österreich

Antrekowitsch H.:
Recycling von Aluminium unter besonderer Berücksichtigung der Spülgastechnik. Institut für Nichteisenmetallurgie und Reinststoffe, Freiberg, Deutschland

Antrekowitsch H.:
Verfahrenstechnologie und Entwicklung bei der Ferrolegierungsherstellung. 166. Stahlwerksausschuss (2005). Loipersdorf, Österreich

Antrekowitsch J.:
Processing of residues by a new developed Flash-Reactor. microCAD 2005 (2005). Miskolc, Ungarn

Antrekowitsch J.:
Tribovent Technologies for the Treatment of Steel-Mill Residues. 5th Asian Steel Conference (2005). Mumbai (Bombay), Indien

Antrekowitsch J.:
Tribovent Verfahrensentwicklung Ges.m.b.H – Verfahren, Projekte & Konzepte. Recycling Fachausschuss (2005). Untervaz, Schweiz

Hochenhofer M.:
A Thermochemical Study of Different Options for Halogen Removal from Nonferrous Metal-Containing Wastes. 134th TMS Annual Meeting & Exhibition (2005). San Francisco, USA

Hochenhofer M.:
Main parameters on the performance of a desulfurization of Ferro-Nickel by slag reaction. 134th TMS Annual Meeting & Exhibition (2005). San Francisco, USA

Hochenhofer M.:
Processing of Vanadiferous Residues to Ferrovanadium. 134th TMS Annual Meeting & Exhibition (2005). San Francisco, USA

Matl B.:
Tribojet atomization unit: Preliminary test of a new method. EMC (2005) Dresden, Deutschland

Messner T.:
Element Distribution and Process Optimization at the Secondary Metallurgy of Copper. EMC (2005), Dresden, Deutschland

Mubarok Z.:
Electrochemical and Metallographic Characterization of Inhibitor Variation in Copper Refining Electrolysis. EMC (2005), Dresden, Deutschland

Offenthaler D.:
Reduction of Melted Steel Mill Dust in an Iron Bath – a “Zero Waste” Solution. International Symposium on Lead & Zinc Processing 2005 (2005), Kyoto, Japan

Potesser M.:
An Overview of Chromium in the Metallurgy. microCAD 2005 (2005), Miskolc, Ungarn

Potesser M.:
Chromium in different metallurgical Residues with special regard to hexavalent chromium. EMC (2005), Dresden, Deutschland

Potesser M.:
Metallurgical Overview of selected Ferroalloys. RHI AG – BU Meeting Industrial – Nonferrous (2005), Wien, Österreich

Prietl T.:
Evaluation of thermomechanical properties in refractory linings. 3. RHI Review (2005), Leoben, Österreich

Prietl T.:
Productivity Increase in a Pierce-Smith Converter using the COP KIN and OPC System. 134th TMS Annual Meeting & Exhibition (2005), San Francisco, USA

Prietl T.:
Pyrometallurgical Refining of Copper in an Anode Furnace. 134th TMS Annual Meeting & Exhibition (2005), San Francisco, USA

Prietl T.:
The Evaluation of Refractory Lining Thermo-Mechanical Properties. EMC (2005), Dresden, Deutschland

Wenzl C.:
Liquid Slag Reduction. EMC (2005), Dresden, Deutschland

Zach O.:
CFD-modelling in the non ferrous metals industry. EMC (2005), Dresden, Deutschland

Antrekowitsch H.:
Aufarbeitung von metallhältigen Reststoffen. Fachausschusstagung NE-Metalle (2004), Leoben, Österreich

Antrekowitsch H.:
Gas treatment as a refining process for aluminuim recycling. Global Symposium on Recycling, Waste Treatment and Clean Technology (2004), Madrid, Spanien

Antrekowitsch H.:
Metallurgische Aufarbeitung von Elektroschrott unter Berücksichtigung der dabei entstehenden Reststoffe. Tagung Elektro- und Elektronikaltgeräte – Abfall oder wertvoller Rohstoff (2004), Leoben, Österreich

Antrekowitsch H.:
Recycling of metals and plastics from electronic scrap. Global Conference on Sustainable Product Development and LCE (2004), Berlin, Deutschland

Antrekowitsch H.:
Verringerung der CO2-Emissionen durch Optimierung der Raffinationsverfahren in der Sekundärmetallurgie der NE-Metalle. Forum für Metallurgie und Werkstofftechnik (2004), Leoben, Österreich

Antrekowitsch J.:
Fluor und Chlorproblematik bei der Aufarbeitung von zinkhältigen Reststoffen. Fachausschusstagung STAHL (2004), Leoben, Österreich

Antrekowitsch J.:
Pyrometallurgische Aufarbeitung von Reststoffen in einem Flash-Reaktor. Depotech (2004), Leoben, Österreich

Filzwieser I.:
25 Jahre bis CESAR. Leoben, Österreich

Filzwieser I.:
Influence of Drifting slimes and anode slimes to the cathodic precipitation. WMC Olympic Dam, Australien

Graller-Kettler G.:
Elimination Of Impurities From Anode Copper By Selective Oxidation. Global Symposium on Recycling, Waste Treatment and Clean Technology (2004), Madrid, Spanien

Hochenhofer M.:
Adaptation of Process Control to increased Phosphorous Content of Raw Materials in Ferrovanadium Production. # Global Symposium on Recycling, Waste Treatment and Clean Technology (2004), Madrid, Spanien #

Hochenhofer M.:
Ermittlung und Bewertung von Prozessparametern bei der sekundärmetallurgischen Herstellung von FeV und FeNi. CD-Labor Evaluierung (2004), Leoben, Österreich

Messner T.:
Modellierung der Stoffströme in einer Sekundärkupferhütte. CD-Labor Evaluierung (2004), Leoben, Österreich

Offenthaler D.:
Zinc Containing Steel Mill Dusts – Between Recycling And Landfilling. Global Symposium on Recycling, Waste Treatment and Clean Technology (2004), Madrid, Spanien

Paschen P.:
Das Bayer-Verfahren: Vom Patent zur weltweiten Technologie. Vortragsveranstaltung anlässlich des 100. Todestages von Dr. Carl Josef Bayer (2004), Leoben, Österreich

Paschen P.:
From Bauxite to Secondary Aluminium. (2004), St. Petersburg, Russland

Paschen P.:
Rohstoffverknappung bei Metallen?. Bundesministerium für wirtschaftliche Angelegenheiten, WienProc.of Symposium “Neue Rohstoffe für neue Technologien” (2004), Wien, Österreich

Prietl T.:
Evaluation of thermomechanical properties in refractory linings 1. Nichteisen Review (2004), Leoben, Österreich

Prietl T.:
Evaluation of thermomechanical properties in refractory linings 2. Nichteisen Review (2004), Leoben, Österreich

Seebacher H.:
Recycling of electronic scrap. Global Symposium on Recycling, Waste Treatment and Clean Technology (2004), Madrid, Spanien

Seebacher H.:
Vorbehandlung von Einsatzmaterialien in der Sekundärmetallurgie von Magnesium. CD-Labor Evaluierung (2004), Leoben, Österreich

Antrekowitsch H.:
Christian-Doppler-Labor für Sekundärmetallurgie der Nichteisenmetalle. Forschung zwischen Stahl- und Nichteisenmetallurgie. Institutskolloquium (2003)

Antrekowitsch H.:
Gas treatment in the secondary metallurgy of nonferrous metals. EMC (2003), Hannover, Deutschland

Antrekowitsch H.:
Investigations in different reducing agents for the pyrometallurgical treatment of steel mill dusts. 132th TMS Annual Meeting & Exhibition (2003), San Diego, USA

Antrekowitsch H.:
Primär- und Sekundärmetallurgie der Nichteisenmetalle unter Berücksichtigung der gesetzlichen Rahmenbedingungen. Nichteisentagung RHI (2003), Wien, Österreich

Antrekowitsch H.:
Recycling von Verbundwerkstoffen aus Stahl und Nichteisenmetallen: Technische Möglichkeiten und gesetzliche Rahmenbedingungen. Forum für Metallurgie und Werkstofftechnik (2003), Leoben, Österreich

Antrekowitsch J.:
A new concept for the recycling of steel mill dust. Zink-Fachausschuss der GDMB (2003), Leipzig, Deutschland

Antrekowitsch J.:
Dezincing of steel scrap. A solution for the zinc-iron problem in steel industry. EMC (2003), Hannover, Deutschland

Antrekowitsch J.:
Die Situation der Stahlwerksstaubaufarbeitung im deutschsprachigen Raum. Recyclingfachausschuss Stahl, ASMET (2003), Leoben, Österreich

Antrekowitsch J.:
Recycling zinkhältiger Stahlwerksstäube: Forschung zwischen Stahl- und Nichteisenmetallurgie. Institutskolloquium (2003)

Filzwieser I.:
25 Jahre Elektrolyse bis zum Projekt “CESAR”. Institutskolloquium (2003)

Filzwieser I.:
CFD – Modellig of Metallurgical Processes. Kupferfachausschuss (2003), Antwerpen, Belgien

Filzwieser I.:
CFD – Modelling of the Electrolyte Flow in a Copper Electrolysis Cell. Intern. Scientific Conference MicroCAD (2003), Miskolc, Ungarn

Filzwieser I.:
Cathodic Current Density Distribution in a Cu Refining Electrolysis. Copper/Cobre (2003), Santiago de Chile, Chile

Filzwieser I.:
Current Density Distribution in a Cu Refining Electrolysis due to Geometrical Conditions. EMC (2003), Hannover, Deutschland

Filzwieser I.:
Einführung in die Kupfermetallurgie. (2003), Wolfsberg, Österreich

Filzwieser I.:
Influence of Drifting Slimes and Anode Slimes on the Cathodic Precipitation. WMC Olympic Dam (2003), Australien

Filzwieser I.:
Influences on the current efficiency in a copper thankhouse. Xstrada (2003), Mount Issa, Australien

Filzwieser I.:
Optimization of the copper refinery process. University of Melbouren (2003), Melbouren, Australien

Filzwieser I.:
Tankhouse optimization different aspects. Xstrada (2003), Townsville, Australien

Hanko G.:
Evolutionäre Entwicklung eines NE-Metallurgen. Institutskolloquium (2003)

Hanko G.:
Technologies for efficient Mg-scrap recycling. 132th TMS Annual Meeting & Exhibition (2003), San Diego, USA

Paschen P.:
1/3 Jahrhundert Institut für Nichteisenmetallurgie. Institutskolloquium (2003)

Paschen P.:
Nachhaltige Entwicklung in der Metallurgie. PSI – Paul Scherrer Institut (2003), Villingen, Schweiz

Paschen P.:
University Education in Nonferrous Metallurgy in Europe. EMC (2003), Hannover, Deutschland

Sommerhofer H.:
Influence Parameters on Continuous Casting of Aluminium. 132th TMS Annual Meeting & Exhibition (2003), San Diego, USA

Sommerhofer H.:
New approaches to solve the problems of surface defects in continuous casting. EMC (2003), Hannover, Deutschland

Sommerhofer H.:
New processes in Continuous Casting. Institutskolloquium (2003)

Thuy M.:
Recovery of Valuable Metals from Sludges and Residues of the Secondary Copper Industry by atmospheric Leaching. EMC (2003), Hannover, Deutschland

Waltritsch S.:
Electronic Scrap. Institutskolloquium (2003)

Waltritsch S.:
Processing of Electronic scrap. EMC (2003), Hannover, Deutschland

Antrekowitsch H.:
Metallurgie des Leichtmetallrecyclings bei Altautos unter Berücksichtigung der gesetzlichen Rahmenbedingungen. Recycling in der Automobilindustrie (2002), Leoben, Österreich

Antrekowitsch H.:
Problemstellungen und Lösungsmöglichkeiten bei der Aufarbeitung von Flugstäuben aus dem Stahlwerksbereich. GDMB, Zinkfachausschuss (2002), Deutschland

Antrekowitsch H.:
Recycling of Aluminium and Magnesium Parts from Used Cars: Legislative Frame and Consequences for Metallurgy and Material Design. Environmental Sustainability Conference and Exhibition (2002)

Antrekowitsch H.:
Sustainable development, Networking in the field of metals recycling. M³ Internat. Congress on European Perspectives in Mining and Metallurgy (2002), Wien, Österreich

Antrekowitsch J.:
Recovery of Zinc and Iron from EAF Steel Mill Dusts with Special Focus on Halogen and Residues. M³ Internat. Congress on European Perspectives in Mining and Metallurgy (2002), Wien, Österreich

Hanko G.:
High current density copper electrolysis based on gravifoli technology. M³ Internat. Congress on European Perspectives in Mining and Metallurgy (2002), Wien, Österreich

Hanko G.:
Recycling of different types of magnesium scrap. 131th TMS Annual Meeting & Exhibition (2002), Seattle, USA

Paschen P.:
Die historische Nickelverhüttung im Raume Schladming und Mandling. Montanhistorische Fachtagung (2002), Schladming, Österreich

Paschen P.:
Metallurgy in Austria. M³ Internat. Congress on European Perspectives in Mining and Metallurgy (2002), Wien, Österreich

Paschen P.:
Molten salt electrolysis of niobium. M³ Internat. Congress on European Perspectives in Mining and Metallurgy (2002), Wien, Österreich

Sommerhofer H.:
Influence parameter on continuous casting of nonferrous metals. M³ Internat. Congress on European Perspectives in Mining and Metallurgy (2002), Wien, Österreich

Waltritsch S.:
Electronic scrap processing. M³ Internat. Congress on European Perspectives in Mining and Metallurgy (2002), Wien, Österreich

Antrekowitsch H.:
Feuerfesttechnik in der Aluminium-Industrie. VRAG Forschung (2001), Leoben, Österreich

Antrekowitsch H.:
Leichtbaustudie Anwendungen von Aluminium und Magnesium im Fahrzeugbau heute. MAGNA Steyr Engineering „ALUMINIUM und MAGNESIUM” Einsatz im Fahrzeugbau – Experten berichten (2001), Graz, Österreich

Antrekowitsch H.:
Primär- und Sekundärmetallurgie von Aluminium. VRAG Forschung (2001), Leoben, Österreich

Antrekowitsch H.:
Problemstellungen und Lösungsmöglichkeiten bei der Aufarbeitung von Flugstäuben aus dem Stahlwerksbereich. Zink-Fachausschuss (2001)

Antrekowitsch H.:
Schweißtechnische Schäden bei Nichteisenlegierungen (Al). SZA (2001), Wien, Österreich

Antrekowitsch H.:
Vergüten und Aushärten von Stählen und Aluminium. Tyrolia (2001), Wien, Österreich

Antrekowitsch H.:
Wärmebehandlung von Aluminium-Legierungen und Stählen. Tyrolia (2001), Wien, Österreich

Filzwieser A.:
Mathem. Simulation in den Strömungsvorgängen in einer Kupferelektrolyse. GDMB Kupferfachausschuss (2001), Sevilla, Spanien

Hanko G.:
The New Jersey Refining Process: A Key Issue for Zinc Recycling. EMC (2001), Friedrichshafen, Deutschland

Paschen P.:
Refraktory metals. LLL-Kurs (16 Vorlesungsstunden). (2001), Department of Applied Earth Sciences, TU Delft, Holland

Paschen P.:
Sustainable Development. LLL-Kurs (16 Vorlesungsstunden). (2001), Department of Applied Earth Sciences, TU Delft, Holland

Hanko G.:
Optimization of the New Jersey Refining Process. Lead-Zinc 2000 Symposium as held at the TMS Fall Extraction & Process Metallurgy Meeting (2000), Pittsburgh, USA

Paschen P.:
Bauxite, Alumina, Aluminium in Asia and Europe – Primary and Secondary Metallurgy. ICSOBA Symposium (2000), Teheran, Iran

Paschen P.:
Ist Eisen ein Metall? .. aus der Sicht des Nichteisenmetallurgen. GDMB-Hauptversammlung (2000), Clausthal-Zellerfeld, Deutschland

Paschen P.:
LLL-Kurs “Refraktärmetalle”. MISIS (2000), Moskau, Russland

Paschen P.:
Mengen- und Energiebilanz bei der Herstellung von Zink. GDMB-Hauptversammlung (2000), Clausthal-Zellerfeld, Deutschland

Paschen P.:
Metallurgie der Refraktärmetalle – eine Übersicht. Freiberger Kolloquium “Werkstofftechnologie” (2000), TU Bergakademie Freiberg, Deutschland

Paschen P.:
Refraktärmetalle. LLL-Kurs (12 Vorlesungsstunden). (2000), Institut für Nichteisenmetallurgie und Reinststoffe, TU Bergakademie Freiberg, Deutschland

Paschen P.:
Seltene Metalle. LLL-Kurs (12 Vorlesungsstunden). (2000), Institut für Nichteisenmetallurgie und Reinststoffe, TU Bergakademie Freiberg, Deutschland

Paschen P.:
Stoffmengenflüsse und Energieverbrauch in der Aluminiummetallurgie. MISIS (2000), Moskau, Russland

Paschen P.:
Stoffmengenflüsse und Energieverbrauch in der Eisenmetallurgie. MISIS (2000), Moskau, Russland

Paschen P.:
Stoffmengenflüsse und Energieverbrauch in der Eisenmetallurgie. MISIS (2000), Moskau, Russland

Paschen P.:
Stoffmengenflüsse und Energieverbrauch in der Kupfermetallurgie. MISIS (2000), Moskau, Russland

Paschen P.:
Stoffmengenflüsse und Energieverbrauch in der Nickelmetallurgie. MISIS (2000), Moskau, Russland

Sommerhofer H.:
Numerische Simulation von thixotropen Aluminiumlegierungen. GDMB-Hauptversammlung (2000), Clausthal-Zellerfeld, Deutschland