Publications

Publications

Krall P., Weißensteiner I. and S. Pogatscher:
Recycling aluminum alloys for the automotive industry: Breaking the source-sink paradigm. Resources, Conervation and Recycling 202 (2024)

Aster P., Dumitraschkewitz P., Uggowitzer PJ., Schmid F., Falkinger G., Strobel K., Kutlesa P., Tkadletz M. and S. Pogatscher:
Strain induced clustering in Al alloys. Materialia (2023), 101964

Büchner K.:
Investigation of the influence of different parameters on the pyrolysis of coated aluminium scrap by thermogravimetry and optical evaluation, EMC 2023, Düsseldorf, Deutschland, 2023

Burtscher M., Weißensteiner I., Wartbichler R., Kirchheimer K., Bernhard C., Kiener D., Clemens H.:
Precipitation behavior of hexagonal carbides in a C containing intermetallic γ-TiAl based alloy, Journal of Alloys and Componds, 969(2023), 172400

Coradini Santa Rosa D., Tunes M.A., Willenshofer P., Samberger S., Kremmer T., Dumitraschkewitz P., Uggowitzer P.J. and Pogatscher S.
In situ transmission electron microscopy as a toolbox for the emerging science of nanometallurgy. Lab on a Chip (2023).

Gerold, E., Lerchbammer R., Strnad C. and H. Antrekowitsch:
Towards a sustainable approach using mineral or carboxylic acid to recover lithium from lithium iron phosphate batteries. Hydrometallurgy, 222 (2023), 106187.

Gerold E., Lerchbammer R. and H. Antrekowitsch
Evaluation of the Influence Exerted by Increased Silicon Contents on the Leaching Behaviour of NMC-Based Black Mass. Metals, 13 (2023), 785.

Gerold E., Lerchbammer R. and H. Antrekowitsch
SeLiReco 2.0 – A more sustainable process for the recycling of lithium-ion batteries. EMC proceedings (2023).

Krall P. and S. Pogatscher
Influence of cooling rates on new alloys from mixed automotive scraps. EMC proceedings (2023).

Leuchtenmüller M. and U. Brandner:
Comparison of reduction kinetics of Fe2O3, ZnOFe2O3 and ZnO with hydrogen (H2) and carbon monoxide (CO). International Journal of Hydrogen Energy (2023), 775-785

Luznik L., Gerold E., Luidold S., Weirather T., Pachlhofer J, Czettl C., Karhumaa T. and Antrekowitsch H.:
Recycling of cemented carbides with gaseous zinc including particular consideration of GGI. EMC proceedings (2023)

Samberger S., Stemper L., Schmid F. and S. Pogatscher
Effect of Heating/Cooling-rates on the aging behaviour of Al alloys. EMC proceedings (2023).

Samberger S., Weißensteiner I., Stemper L., Kainz C., Uggowitzer P. and S. Pogatscher
Fine-grained aluminium crossover alloy for high-temperature sheet forming. Acta Materialia, 253 (2023), 118952.

Scheiblehner D., Antrekowitsch H., Neuschitzer D., Wibner S. and A. Sprung:
Hydrogen Production by Methane Pyrolysis in Molten Cu-Ni-Sn Alloys. Metals, 13 (2023), 1310.

Tichy S., Pucher P., Prillhofer B., Wibner S. and H. Antrekowitsch
Hydrogen Absorption of Aluminum-Magnesium Melts from Humid Atmospheres. TMS Light Metals (2023), San Diego, USA, 920–927

Tichy S., Pucher P., Prillhofer B., Wibner S. and H. Antrekowitsch
Comparison of experimental methods to investigate the oxidation behaviour of aluminium melts. EMC proceedings (2023).

Trink B., Weißensteiner I., Uggowitzer P.J., Strobel K., Hofer-Roblyek A., Pogatscher S.:
Processing and microstructure–property relations of Al-Mg-Si-Fe crossover alloys, Acta Materialia, 257 (2023), 119160

Weidinger A.; Samberger S.; Schmid F.; Stemper L.; Pogatscher S.:
Industry-oriented sample preparation with an inductively heated laboratory continuous casting plant for aluminum alloys. European Metallurgical Conference EMC, Düsseldorf, Deutschland, 2023

Weißensteiner I.:
Deformation Analysis in Novel Aluminum Alloys, EMC 2023 Proceedings, 2023

Zamani M.R., Mirzadeh H., Malekan M., Weißensteiner I., Roostaei M.:
Unveiling the strengthening mechanisms of as-cast micro-alloyed CrMnFeCoNi high-entropy alloys, Journal of Alloys and Compounds, 957 (2023)

Antrekowitsch J. and G. Hanke
Efficient steel mill dust recycling – Aiming for zero waste. Rewas 2022 – Developing tomorrow‘s technical cycles (2022), Anaheim, Kalifornien, USA, 303–310

Antrekowitsch J. and G. Hanke
Verwertung von Schlacken aus dem Recycling metallurgischer Nebenprodukte, Mineralische Nebenprodukte und Abfälle (2022), 9, 304–315

Auer M., C. Wölfler and J. Antrekowitsch
Inflluence of different carbon content on reduction of zinc oxide via metal bath. Applied Sciences (2022), 12, 2, 4180

Brandner U., M. Leuchtenmüller, F. Hoffelner and J. Antrekowitsch
A tailor – made experimental setup for thermogravimetric analysis of the hydrogen- and carbon monoxide- based reduction of Iron(III) oxide (Fe2O3) and zinc ferrite (ZnOFe2O3). TMS – 151st Annual meeting and Exhibition supplemental proceedings (2022), Anaheim, Kalifornien, USA, 917–926

Cantergiani E., I. Weißensteiner, J. Grasserbauer, G. Falkinger, S. Pogatscher and F. Roters
Influence of hot band annealing on cold-rolled microstructure and recrystallization in AA 6016. Metallurgical and Materials Transactions A – Physical metallurgy and materials science (2022), online. Print 2023

Dumitraschkewitz P., M. Tunes, C. Quick, D. Santa Rosa Coradini, T. Kremmer, P. Ramasamy, P. Uggowitzer and S. Pogatscher
MEMS-based in situ electron-microscopy investigation of rapid solidification and heat treatment on eutectic Al-Cu. Acta Materialia (2022), 118225

Gerold E. and H. Antrekowitsch
Interrelationships between pre-processing and subsequent procedures in the recycling of LIBs. Recy&Depo Tech (2022), Leoben, Österreich, online proceeding

Gerold E. and H. Antrekowitsch
A sustainable approach for the recovery of manganese from spent lithium-ion batteries via photocatalytic oxidation. International Journal of Materials Science and Applications (2022), 11, 3, 66–75

Gerold E., C. Schinnerl and H. Antrekowitsch
Critical evaluation of the potential of organic acids for the environmentally friendly recycling of spent lithium-ion batteries. Recycling (2022), 7, 4, 7010004

Gerold E., H. Antrekowitsch and R. Lerchbammer
Parameter study on the recycling of LFP cathode material using hydrometallurgical methods. Metals (2022), 12, 10, 1706

Hanke G. and J. Antrekowitsch
Verwertung von Schlacken aus dem Recycling metallurgischer Nebenprodukte. Mineralische Nebenprodukte und Abfälle (2022), 9, 305–314

Hanke G., J. Antrekowitsch, F. Castro and H. Krug
Maximizing the efficiency of by-product treatment by multi-metal recovery and slag valorization. Rewas 2022 – Developing tomorrow‘s technical cycles (2022), Anaheim, Kalifornien, USA, 201–211

Hanke G. and J. Antrekowitsch
Assessment of by-products from metal producing industry – Development of a certification procedure and case study “Dust from Secondary Copper Industry“. SIPS (2022), Phuket, Thailand

Höber L., R. Ahmed, T. Hofbauer and S. Steinlechner
Strategies for the upgrade of a TBZC product (Tetra Basic Zinc Chloride) by selective removal of the impurity chlorine. Rewas 2022 – Developing tomorrow‘s technical cycles (2022), Anaheim, Kalifornien, USA, 95–108

Höber L., K. Witt and S. Steinlechner
Selective chlorination and extraction of valuable metals from iron precipitation residues. Applied Sciences (2022), 12, 7, 3590

Kleeberg C., L. Cattini, T. Kremmer and J. Antrekowitsch
Characterisation of secondary copper smelting slag with transmission electron microscopy. Metallurgical Transactions B

Körbler N., G. Mori, E. Gerold, H. Antrekowitsch, J. Klocek and T. Krivec
Cyclic voltammetric analysis of copper dissolution in acidic chloride electrolytes containing copper ions. Copper Conference (2022), Santiago, Chile, online proceeding

Körbler N., T. Ebner, H. Antrekowitsch, T. Krivec and J. Klocek
Voltammetric investigations regarding the reaction and diffusion rates of copper in aqueous solutions. World of metallurgy – Erzmetall (2022), 75, 5, 251–257

Leitner M., F. Winter, E. Gerold, S. Luidold, C. Storf, C. Czettl, L. Janka, T. Karhumaa and H. Antrekowitsch
Studies on the phase formation of cobalt contacted with zinc vapour (2022), International Journal of refractory metals and hard materials (2022), 107, 9, 105877

Leuchtenmüller M. and U. Brandner
The catalytic effect of the metal bath on the zinc oxide reduction. Results in Engineering (2022), 16, 12, 100514

Papenberg N., A. Arnoldt, B. Trink, P. Uggowitzer and S. Pogatscher
Closed die forging of a Mg-Al-Ca-Mn-Zn lean alloy. Materials Science and Engineering: A (2022), 857, 144079

Papenberg N., T. Hatzenbichler, F. Grabner, P. Uggowitzer and S. Pogatscher
Forging of an age-hardenable Mg–Al–Ca–Mn–Zn alloy on industrial scale. SN applied sciences, online, Print 2023

Prada Ramirez O., M. Tunes, M. Mennucci, M. Starykevich, C. Neves, M. Ferreira, S. Pogatscher and H. De Melo
Ce post-treatment for increased corrosion resistance of AA2024-T3 anodized in tartaric-sulfuric acid. Corrosion science (2022), 204, 8, 110371

Quick C., P. Dumitraschkewitz, S. Pogatscher and J. Schawe
Fast differential scanning calorimetry to mimic additive manufacturing processing – Specific heat capacity analysis of aluminium alloys. Journal of Thermal Analysis and Calorimetry (2022), online, Print 2023

Raabe D., D. Ponge, P. Uggowitzer, M. Roscher, M. Paolantonio, C. Liu, H. Antrekowitsch, E. Kozeschnik, D. Seidmann, B. Gault, F. De Geuser, A. Deschamps, C. Hutchinson, C. Liu, Z. Li, P. Prangnell, J. Robson, P. Shanthraj, S. Vakili, C. Sinclair, L. Bourgeois and S. Pogatscher
Making sustainable aluminum by recycling scrap. Progress in material science (2022), 128, 7, 100947

Renk O., I. Weißensteiner, M. Cihova, E-M. Steyskal, N. Sommer, M. Tkadletz, S. Pogatscher, P. Schmutz, J. Eckert, P. Uggowitzer, R. Pippan and A. Weinberg
Mitigating the detrimental effects of galvanic corrosion by nanoscale composite architecture design. npj materials degradation (2022), 6, 47

Scheiblehner D., D. Neuschitzer, S. Wibner, A. Sprung and H. Antrekowitsch
Hydrogen production by methane pyrolysis in molten binary copper alloys. International Journal of hydrogen energy (2022), online, Print 2023

Scheiblehner D., H. Antrekowitsch, S. Luidold, C. Sagadin and D. Offenthaler
Investigation of melting behavior and viscosity of slags from secondary ferromanganese production. Furnace tapping (2022), 311–324

Schimbäck D., P. Mair, M. Bärtl, F. Palm, G. Leichtfried, S. Mayer, P. Uggowitzer, and S. Pogatscher
Alloy design strategy for microstructural-tailored scandium-modified aluminium alloys for additive manufacturing. Scripta Materialia (2022), 207, 1, 114277

Schimbäck D., P. Mair, L. Kaserer, L. Perfler, F. Palm, G. Leichtfried and S. Pogatscher
An improved process scan strategy to obtain high-performance fatigue properties for Scalmalloy. Materials and Design (2022), 224, 12, 111410

Schmid F., D. Gehringer, T. Kremmer, L. Cattini, P. Uggowitzer, D. Holec and S. Pogatscher
Stabilization of Al 3 Zr allotropes in dilute aluminum alloys via the addition of ternary elements. Materialia (2022), 21, 3, 101321

Schäublin R., M. Becker, M. Cihova, S. Gerstl, D. Deiana, C- Hébert, S. Pogatscher, P. Uggowitzer and J. Löffler
Precipitation in lean Mg–Zn–Ca alloys. Acta Materialia (2022), 239, 10, 118223

Steinlechner S. and L. Höber
CO2-optimized recovery of special metals from precipitation residue by selective chlorination. 8th Symposium on rare metal extraction and processing held at the 151st TMS Annual meeting and Exhibition (2022), Anaheim, Kalifornien, USA, 237–244

Thiel S., E. Thomé-Kozmiensky, D. Senk, H. Wotruba, H. Antrekowitsch and R. Pomberger
Mineralische Nebenprodukte und Abfälle 9: Aschen, Schlacken, Stäube und Baurestmassen. TK Verlag Karl Thomé-Kozmiensky, 2022

Trink B., I. Weißensteiner, P. Uggowitzer, K. Strobl and S. Pogatscher
High Fe content in Al-Mg-Si wrought alloys facilitates excellent mechanical properties. Scripta Materialia (2022), 215, 7, 114701

Tunes M., S. Drewry, J. Arregui-Mena, S. Picak, G. Greaves, L. Cattini, S. Pogatscher, J. Valdez, S. Fensin, O. El-Atwani, S. Donnelly, T. Saleh and P. Edmondson
Accelerated radiation tolerance testing of Ti-based MAX phases. Materials Today Energy (2022), 30, 12, 101186

Wibner S., D. Neuschitzer, D. Scheiblehner and H. Antrekowitsch
A Brief Insight – Methanpyrolyse im Flüssigmetallreaktor. Insight Energy (2022), 6, 68–70

Abdelrahim A., M. Aula, M. Iljana, T. Willms, T. Echterhof, S. Steinlechner, D. Mombelli, C. Mapelli, M. Omran, S. Preiss und T. Fabritius:
Suitability of self-reducing and slag-forming briquettes for electric arc furnace use based on laboratory tests. Steel research international (2021), 1–20

Antrekowitsch J., C. Dornig und G. Hanke:
Pyrolzed biomass for CO2-neutral reduction processes. 11th European Metallurgical Conference (2021), Salzburg, Österreich, online proceeding

Auer M., J. Antrekowitsch, B. Voraberger, K. Pastucha und U. Salgado:
2sDR – the future solution for steel mill dust recycling. 11th European Metallurgical Conference (2021), Salzburg, Österreich, online proceeding

Brandner U., J. Antrekowitsch und M. Leuchtenmüller:
A review on the fundamentals of hydrogen-based reduction and recycling concepts for electric arc furnace dust extended by a novel conceptualization. International Journal of Hydrogen Energy (2021), 46, 62, 31894–31902

Dumitraschkewitz P., M. Tunes, C. Quick, D. Coradini, T. Kremmer, P. Ramasamy, P. Uggowitzer und S. Pogatscher:
MEMS-based in situ electron-microscopy investigation of rapid solidification and heat treatment on eutectic Al-Cu. arXiv (2021), 2101.02935

Ebner T., G. Schiefer, M. Honner, S. Luidold, C. Czettl und C. Storf:
Influence of metal ions on the decomposition of H2O2 in sulphuric acid media. 11th European Metallurgical Conference (2021), Salzburg, Österreich, online proceeding

Gerold E., S. Luidold und H. Antrekowitsch:
Decomposition of hydrogen peroxide in selected organic acids. 11th European Metallurgical Conference (2021), Salzburg, Österreich, online proceeding

Gerold E. und H. Antrekowitsch:
Potenzialabschätzung von Synergieeffekten zur simultanen Rückgewinnung von Wertmetallen aus komplexen metallhaltigen Reststoffen. Österreichische Wasser- und Abfallwirtschaft (2021), 63, 22–31

Gerold E., S. Luidold und H. Antrekowitsch:
Separation and Efficient Recovery of Lithium from Spent Lithium-Ion Batteries. Metals (2021), 11, 7, 1091

Grasserbauer J., I. Weißensteiner, G. Falkinger, T. Kremmer, P. Uggowitzer und S. Pogatscher:
Influence of Fe and Mn on the microstructure formation in 5xxx alloys – Part I: Evolution of primary and secondary phases. Materials (2021), 14, 12, 3204

Grasserbauer J., I. Weißensteiner, G. Falkinger, P. Uggowitzer und S. Pogatscher:
Influence of Fe and Mn on the microstructure formation in 5xxx alloys – Part II: Evolution of grain size and texture. Materials (2021), 14, 12, 3312

Hanke G., J. Antrekowitsch und T. Wiessler:
COMMBY – Developing strategies for the evaluation and certification of metallurgical by-products. 11th European Metallurgical Conference (2021), Salzburg, Österreich, online proceeding

Höber L., R. Lerche und S. Steinlechner:
Algorithmic modelling of advanced chlorination procedures for multimetal recovery. Metals (2021), 11, 10, 1595

Höber L. und S. Steinlechner:
Carbon-reduced pyrometallurgical extraction of critical elements from jarosite and goethite. 11th European Metallurgical Conference (2021), Salzburg, Österreich, online proceeding

Höber L. und S. Steinlechner:
A comprehensive review of processing strategies for iron precipitation residues from zinc hydrometallurgy. Cleaner Engineering and Technology (2021), 4, 100214

Körbler N., T. Ebner, S. Luidold, H. Antrekowitsch, J. Klocek und T. Krivec:
Voltametric investigations regarding the reaction and diffusion rates of copper in aqueous solutions. 11th European Metallurgical Conference (2021), Salzburg, Österreich, online proceeding

Leitner M., S. Luidold, T. Ebner, C. Czettl und S. Storf:
Contacting cobalt with vaporous zinc. 11th European Metallurgical Conference (2021), Salzburg, Österreich, online proceeding

Leuchtenmüller M., C. Legerer, U. Brandner und J. Antrekowitsch:
Carbothermic reduction of zinc containing industrial wastes – A kinetic model. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science (2021), 52, 1, 548–557

Mitterlehner M., H. Danninger, C. Gierl-Mayer, H. Gschiel, C. Martinez, M. Tomisser, M. Schatz, S. Senck, J. Auer und C. Benigni:
Comparative evaluation of characterization methods for powders used in additive manufacturing. Journal of Materials Engineering and Performance (2021), 30, 9, 7019–7034

Österreicher J., F. Grabner, M. Tunes, D. Coradini, S. Pogatscher und C. Schlögl:
Two step-ageing of 7xxx series alloys with an intermediate warm-forming step. Journal of Materials Research and Technology (2021), 12, 1508–1515

Papenberg N., S. Gneiger, P. Uggowitzer und S. Pogatscher:
Lean wrought magnesium alloys. Materials (2021), 14, 15, 4282

Sagadin C., S. Luidold, C. Wagner, C. Pichler, D. Kreuzer, A. Spanring, H. Antrekowitsch, A. Clarke und K. Clarke:
Thermodynamic refractory corrosion model for ferronickel manufacturing. Metallurgical and Materials Transactions B (2021), 52, 1052–1060

Schimbäck D., P. Mair, M. Bärtl, F. Palm, G. Leichtfried, S. Mayer, P. Uggowitzer und S. Pogatscher:
Alloy design strategy for microstructural-tailored scandium-modified aluminium alloys for additive manufacturing. Scripta Materialia (2021), 207, 114277

Schmid F., I. Weißensteiner, M. Tunes, T. Kremmer, T. Ebner, R.Morak, P. Uggowitzer und S. Pogatscher:
Synergistic alloy design concept for new high-strength Al-Mg-Si thick plate alloys. Materialia (2021), 15, 100997

Schmid F., P. Dumitraschkewitz, T. Kremmer, P. Uggowitzer, R. Tosone und S. Pogatscher:
Enhanced aging kinetics in AlMgSi alloys by up-quenching. Communications materials (2021), 2, 58, 10.1038

Steinlechner S., J. Antrekowitsch und F. Ludewig:
Innovative Losung fur das Fluorproblem bei der hydrometallurgischen Zinkherstenung in Kombination mit einer verstärkten Verwendung von Walzoxid als Ersatz fur Zinkblende-Rostoxid. World of Metallurgy – Erzmetall (2021), 74, 1, 26–32

Steinlechner S.:
Unique process for solving the fluorine problem in primary zinc industry. 11th European Metallurgical Conference (2021), Salzburg, Österreich, online proceeding

Stemper L., M. Tunes, R. Tosone, P. Uggowitzer und S. Pogatscher:
On the potential of aluminum crossover alloys. Progress in material science (2021), 124, 100873

Stemper L., M. Tunes, P. Dumitraschkewitz, F. Mendez-Martin, R. Tosone, D. Marchand, D. Curtin, P. Uggowitzer und S. Pogatscher:
Giant hardening response in AlMgZn(Cu) alloys. Acta Materialia (2021), 206, 116617

Tunes M., C. Quick, L. Stemper, D.S.R. Coradini, J. Grasserbauer, P. Dumitraschkewitz, T. Kremmer und S. Pogatscher:
A fast and implantation-free sample production method for large scale electron-transparent metallic samples destined for MEMS-based in situ S/TEM experiments. Materials (2021), 14, 5, 1085

Tunes M., G. Greaves, P. Rack, W. Boldman, C. Schön, S. Pogatscher, S. Maloy, Y. Zhang und O. El-Atwani:
Irradiation stability and induced ferromagnetism in a nanocrystalline CoCrCuFeNi highly-concentrated alloy. Nanoscale (2021), 13, 48, 20437–20450

Tunes M., M. Imtyazuddin, C. Kainz, S. Pogatscher und V.M. Vishnyakov:
Deviating from the pure MAX phase concept: Radiation-tolerant nanostructured dual-phase Cr2AlC. Science Advances (2021), 7, 13, eabf6771

Wibner S. und H. Antrekowitsch:
Recycling von minderwertigen Aluminiumschrotten. Berg- und Hüttenmännische Monatshefte (2021), 166, 3, 131–136

Wibner S., H. Antrekowitsch und T.C. Meisel:
Studies on the formation and processing of aluminium dross with particular focus on special metals. Metals (2021), 11, 7, 1108

Wibner S. und H. Antrekowitsch:
Recycling of aluminium-containing residues. 11th European Metallurgical Conference (2021), Salzburg, Österreich, online proceeding

Wimler D., J. Lindemann, T. Kremmer, H. Clemens und S. Mayer:
Microstructure and mechanical properties of novel TiAl alloys tailored via phase and precipitate morphology. Intermetallics (2021), 138, 107316

Windisch-Kern S., E. Gerold, T. Nigl, A. Jandric, M. Altendorfer, B. Rutrecht, S. Scherhaufer, H. Raupenstrauch, R. Pomberger, H. Antrekowitsch und F.  Part:
Recycling chains for lithium-ion batteries: A critical examination of current challenges, opportunities and process dependencies. Waste management (2021), 138, 125–139

Woschank M., B. Ralph, A. Kaiblinger, P. Miklautsch, C. Pacher, M. Sorger, H. Zsifkovits, M. Stockinger, S. Pogatscher, T. Antretter und H. Antrekowitsch:
MUL4.0 – Digitalisierung der Wertschöpfungskette vom Rohmaterial bis hin zum Recycling. Berg- und Hüttenmännische Monatshefte (2021), 5, 167, 1–6

Antrekowitsch J., G. Hanke, F. Melcher and H. Flachberger:
Das COMET-Projekt COMMBY – Aufbau eines fachübergreifenden Forschungsnetzwerkes zur Nutzung metallhältiger Nebenprodukte. Berg und Hüttenmännische Monatshefte, 2020, Heft 8, 338-345

Antrekowitsch J. and G. Hanke:
Characterization and Processing of Residues from Hydrometallurgical Zinc Smelters. Proceedings of Lead&Zinc 2020, 9th International Symposium on Lead and Zinc Processing, 437-445

Antrekowitsch J. and G. Hanke:
Evaluation and Certification Strategies for Lead–Zinc-Bearing Residues. Proceedings of Lead&Zinc 2020, 9th International Symposium on Lead and Zinc Processing, 309-318

Antrekowitsch J. and G. Hanke:
Potenziale von Nebenprodukten der metallurgischen Industrie als sekundäre Rohstoffquelle. Berg und Hüttenmännische Monatshefte, 2020, Heft 10, 572-577

Aradi E., M. A. Tunes, J. Lewis-Fell, G. Greaves, H. Antrekowitsch, S. Pogatscher, S. E. Donnelly and J. A. Hinks:
Radiation Damage Suppression in AISI-316 Steel Nanoparticles: Implications for the Design of Future Nuclear Materials. ACS Applied Nano Materials 3(10) (2020), 9652–9662

Auer M. and J. Antrekowtisch:
Alternative Lösungen für das Recycling von Stahlwerksstaub am Beispiel 2sDR-Verfahren. Berliner Konferenz: mineralische Nebenprodukte und Abfälle, 2020

Brandner, U., M. Leuchtenmüller and J. Antrekowitsch:
Vorstellung eines am Lehrstuhl für Nichteisenmetallurgie entwickelten thermodynamischen Modells des Wälzprozesses. Berg- und hüttenmännische Monatshefte : BHM. (November 2020)

Coradini, M. A. Tunes, T. M. Kremmer, C. G. Schön, P. J. Uggowitzer and S. Pogatscher:
Degradation of Cu nanowires in a low-reactive plasma environment. npj Materials Degradation, 4(1) (2020), 1–8

Ebner, T.; N. Körbler; S. Luidold; C. Czettl and C. Storf:
Studies on the Formation of Intermetallic Compound Layers in Co(W)–Zn Diffusion Couples: Siegmund, Alam et al. (Hg.) 2020 – PbZn 2020, 661–672

Gerold E., Luidold S. and H. Antrekowitsch:
Optimization of a leaching process for pulverized metal-containing residues. Sustainable industrial processing Summit and exhibition, 2020, 65-72

Gerold E., Luidold S., Honner M., Antrekowitsch H. and A. Arnberger:
Development of a Hydrometallurgical Recycling Concept for Metal-containing Residues from the Battery Sector. Word of Metallurgy – Erzmetall 73 (4), 2020, 181-188

Gerold E., Luidold S., Bartelme C. and H. Antrekowitsch:
Pyrometallurgische Aufarbeitung von Zwischenprodukten beim Batterierecycling. Recycling- und Sekundärrohstoffe Band 13, 2020, 558-567

Gerold E., Luidoild S. and H. Antrekowitsch:
Selective Precipitation of Metal Oxalates from Lithium Ion Battery Leach Solutions. Metals 10 (1435), 2020

Grasserbauer J., I. Weißensteiner, G. Falkinger, S. Mitsche, P. J. Uggowitzer and S. Pogatscher:
Evolution of Microstructure and Texture in Laboratory- and Industrial-Scaled Production of Automotive Al-Sheets, Materials 2020, 13, 469

Gruber B., I. Weißensteiner, T. Kremmer, F. Grabner, G. Falkinger, A. Schökel, F. Spieckermann, R. Schäubling, P. J. Uggowitzer and S. Pogatscher:
Mechanism of low temperature deformation in aluminium alloys. Materials Science and Engineering: A 795 (2020), 139935.

Gruber B., F. Grabner, W. Fragner, A. Schökel, F. Spieckermann, P. J. Uggowitzer and S. Pogatscher:
Ageing Behaviour of Al–Mg–Si Alloys After Cryogenic and Room Temperature Deformation. Materials 13(3) (2020), 554

Gruber B., F. Grabner, G. Falkinger, A. Schökel, F. Spieckermann, P. J. Uggowitzer and S. Pogatscher:
Room temperature recovery of cryogenically deformed aluminium alloys. Materials & Design (2020), 108819

G. Hanke, J. Antrekowitsch and T. Wiessler:
Charakterisierung von Nebenprodukten der metallurgischen Industrie – der erste Schritt zur Zertifizierung Berliner Konferenz mineralische Nebenprodukte und Abfälle 7,232-243, 2020

G. Hanke, L. Höber and J. Antrekowitsch:
Charakterisierung und Aufarbeitungsoptionen für Stäube der Kupfer-Sekundärmetallurgie. Berg und Hüttenmännische Monatshefte, 2020, Heft 10, 587-591

Höber L. and S. Steinlechner:
combined recycling of jarosite and magnesium salt slags – an innovative way for the recovery of indium and silver with reduced carbon emissions. Proceedings of the 59th Annual Conference of Metallurgists – COM (2020)

Holec D., P. Dumitraschkewitz, D. Vollath and Franz D. Fischer:
Surface Energy of Au Nanoparticles Depending on Their Size and Shape. nanomaterials, 2020, 10, 484, 1-14

Kremmer T.M., P. Dumitraschkewitz, D. Pöschmann, T. Ebner, P.J. Uggowitzer, G.K.H. Kolb and S. Pogatscher:
Microstructural Change during the Interrupted Quenching of the AlZnMg(Cu) Alloy AA7050. Materials, 2020, 13, 2554, 1-11

Kücher G., S. Luidold, C. Czettl and C. Storf:
Successful control of the reaction mechanism for semi-direct recycling of hard metals. Int. Journal of Refractory Metals and Hard Materials 86 (2020), 105131

Leuchtenmüller M., W. Schatzmann and S. Steinlechner:
A kinetic study to recover valuables from hazardous ISF slag. Journal of environmental chemical engineering (2020)

Papenberg, N. P., Gneiger, S., Weißensteiner, I., Uggowitzer, P. J. and S. Pogatscher:
Mg-alloys for forging applications-A review. Materials. 13.2020, 4, 61 pages., 985

Pfandl K., H. Antrekowitsch, D. Höllen, J. Holzer, B. Küppers, R. Pomberger, S. Scheiber and G. Stockinger:
X-ray fluorescence sorting of non-ferrous metal fractions from municipal solid waste incineration bottom ash processing depending on particle surface properties. Waste management & research (2020), 111 – 121

Pogatscher S., L. Stemper, P. J. Uggowitzer and W. Fragner:
Crossover-Legierungen – Aushärtung und Verformungspotenzial. 11. RANSHOFENER LEICHTMETALLTAGE- Leichtmetalle, Werkstoff- und Prozesstechnologien im Kontext von Dekarbonisierung und Digitalisierung (2020). Ranshofen, Österreich

Österreicher J. A., M. A. Tunes, F. Grabner, A. Arnoldt, T. Kremmer, S. Pogatscher and C. M. Schlögl:
Warm-forming of pre-aged Al-Zn-Mg-Cu alloy sheet. Materials & Design (2020), 108837

Ramirez O. M. P., F. M. Queiroz, M. A. Tunes, R. A. Antunes, C. L. Rodrigues, A. Lanzutti, Pogatscher S., M. G. Olivier and H. G. De Melo:
Tartaric-sulphuric acid anodized clad AA2024-T3 post-treated in Ce-containing solutions at different temperatures: Corrosion behaviour and Ce ions distribution. Applied Surface Science 534 (2020), 147634

Schawe J. E., S. Pogatscher and J. F. Löffler:
Thermodynamics of polymorphism in a bulk metallic glass: Heat capacity measurements by fast differential scanning calorimetry. Thermochimica Acta 685 (2020), 178518

Schön, C. G., M. A. Tunes, R. Arróyave and J. Agren:
On the complexity of solid-state diffusion in highly concentrated alloys and the sluggish diffusion core-effect. Calphad, Band 68 (2020)

Silva F. C., M. A. Tunes, J. C. Sagás, L. C. Fontana, N. B. de Lima, and C. G. Schön:
Mechanical properties of homogeneous and nitrogen graded TiN thin films. Thin solid films 710 (2020)

Silva F. C., O. P. Ramirez, M. A. Tunes, P. D. Edmondson, J. Sagás, L. C. Fontana, H. de Mello and C. G. Schön:
Corrosion resistance of functionally graded TiN/Ti coatings for proton exchange membrane fuel cells. International Journal of Hydrogen Energy Volume 45, Issue 58 (2020)

Silva F. C., M. A. Tunes, P. D. Edmondson, N. B. Lima, J. C. Sagás, L. C. Fontana and C. G. Schön:
Grid-assisted magnetron sputtering deposition of nitrogen graded TiN thin films. SN Applied Sciences, Band 2 (2020), 865

Steinlechner S. and L. Höber:
The iron precipitate from primary zinc production: A potential future source for indium and silver. Rare Metal Technology (1/2020), pp 209-220

Steinlechner S.:
Selective Recovery of PGMs and Cerium by a Hydrochloric Leaching Process for Automotive Catalysts. Proceedings of the 59th Annual Conference of Metallurgists (2020)

Stemper L., M. A. Tunes, P. Oberhauser, P. J. Uggowitzer and S. Pogatscher:
Age-hardening response of AlMgZn alloys with Cu and Ag additions. Acta Materialia, (2020)

Thomé-Kozmiensky E., H. Antrekowitsch, G. Deiter, R. Pomberger, S. Thiel and H. Wotruba:
Mineralische Nebenprodukte und Abfälle 7: Aschen, Schlacken, Stäube und Baurestmassen. TK Verlag Karl Thomé-Kozmiensky (2020)

Tunes M. A., C. Quick, L. Stemper, D. S. R. Coradini, J. Grasserbauer, P. Dumitraschkewitz, T. M. Kremmer and S. Pogatscher:
A contaminationfree electron-transparent metallic sample preparation method for MEMS experiments with in situ S/TEM. arXiv:2012.029 (2020)

Tunes M. A., L. Stemper, G. Greaves, P. J. Uggowitzer and S. Pogatscher:
Prototypic Lightweight Alloy Design for Stellar‐Radiation Environments. Advanced Science, 7(22) (2020), 2002397

Wibner S. and H. Antrekowitsch:
Recycling von Al-Schrotten mit hohem Organikanteil, Recy & DepoTech (2020), Leoben, Österreich, 113–118

Wibner S. and H. Antrekowitsch:
Aufarbeitung von Reststoffen aus der Aluminium-Industrie. Mineralische Nebenprodukte und Abfälle 7 (2020), Berlin, Deutschland, 296–309.

Wibner S. and H. Antrekowitsch:
Comparison of two dross press systems in the aluminum recycling industry. Proceedings of SIPS (2019), Vol. 4, Paphos, Zypern, 109–117.

Wibner S., H. Antrekowtisch and B. Falkensammer
Representative Sampling, Fractionation and Melting of Al-Scrap. TMS Light Metals (2020), San Diego, USA, 1083–1090.

Willms, T., T. Echterhof, S. Steinlechner, M. Aula, A. Abdelrahim, T. Fabritius, D. Mombelli, C. Mapelli, and S. Preiss:
Investigation on the chemical and thermal behavior of recycling agglomerates from EAF by-products. Applied Sciences (2020), pp. 1-14

Antrekowitsch J. and S. Steinlechner:
Efficient Utilization of Zinc-, Lead- and Copper-Containing By-Products. REWAS TMS 2019, San Antonio, USA, 2019

Auer M., J. Antrekowitsch and G. Hanke:
“2sDR” An innovative mini mill concept for EAF-dust recycling. WASTES – solutions, treatments, opportunities, 2019

Dumitraschkewitz P., P. J. Uggowitzer, S. S. A. Gerstl, J. F. Löffler and S. Pogatscher:
Size-dependent diffusion controls natural aging in aluminium alloys. Nature Communications, 2019, 10, 1-6

Ebenberger P., P. J. Uggowitzer, B. Gerold and S. Pogatscher:
Effect of Compositional and Processing Variations in New 5182-Type AlMgMn Alloys on Mechanical Properties and Deformation Surface Quality. Materials 12(10) (2019), 1645

Ebenberger, P., P. J. Uggowitzer, S. Kirnstötter, B. Gerold, S. Zaefferer and S. Pogatscher:
Processing-controlled suppression of Lüders elongation in AlMgMn alloys. Scripta Materialia 166 (2019), 64–67

Ebner T., S. Luidold, M. Honner, C. Czettl and C. Storf:
Studies on the decomposition of H2O2 as additive for the semi-direct recycling of cemented carbides. EMC 2019, Düsseldorf, Deutschland, 869–887

Ebner T. and C. Sagadin:
Hauptexkursion des Lehrstuhls für Nichteisenmetallurgie der Montanuniversität Leoben 2019. Erzmetall World of Metallurgy, Vol.72, (2019) No.5, 303–306

Echterhof T., T. Willms, S. Preiss, M. Omran, T. Fabritius, D. Mombelli, C. Mapelli, S. Steinlechner, I. Unamuno, S. Schueler, D. Mudersbach and T. Griessacher:
Developing a new process to agglomerate secondary raw material fines for recycling in the electric arc furnace – the fines2EAF project. Metallurgia Italiana (2019) No. 5, 31-40

Echterhof T., T. Willms, S. Preiss, M. Aula, A. Abdelrahim, T. Fabritius, D. Mombelli, C. Mapelli, S. Steinlechner and I. Unamuno:
Fabrication of agglomerates from secondary raw materials reinforced with paper fibres by stamp pressing process. Applied Sciences (2019), No. 9, Switzerland, 39-46

Esterl R., M. Sonnleitner, I. Weißensteiner, K. Hartl and R. Schnitzer:
Influence of quenching conditions on texture and mechanical properties of ultra-high strength steels. Journal of materials science, (54.2019, 19), S. 12875-12886 12 S.

Gerold E., S. Luidold, M. Honner and H. Antrekowitsch:
Leaching of metal-containing residues from the battery sector. World of Metallurgy – Erzmetall 72 (5), 2019, 267-273

Gerold E., S. Luidold, S. Scheiber and M. Honner:
Synergy effect at the recycling of metal containing waste from the waste industry. EMC 2019, Düsseldorf, Deutschland, 973-982

Glöckel F., P. J. Uggowitzer, P. Felfer, S. Pogatscher and H. W. Höppel:
Influence of Zn and Sn on the Precipitation Behavior of New Al–Mg–Si Alloys. Materials 12(16) (2019), 2547

Hofer D., S. Luidold and T. Beckmann:
Slag metallurgy for recycling of Tantalum. World of Metallurgy – Erzmetall 72 (5), 2019, 274–280

Hofer D., S. Luidold and T. Beckmann:
Slag metallurgy for recycling of Ta. EMC 2019, Düsseldorf, Deutschland, 2019, 1297–1309

Hofer D., S. Luidold and T. Beckmann:
Influence of CaO/SiO2/Al2O3 ratio on the melting behaviour of SynCon slags. TMS 2019, Freeze Linings: Myth and Reality, San Antonio, USA, 2019, 1139–1148

Horky, J., A. Ghaffar, K. Werbach, B. Mingler, S. Pogatscher, R. Schäublin, D. Setman, P. J. Uggowitzer, J. F. Löffler and M. J. Zehetbauer:
Exceptional Strengthening of Biodegradable Mg-Zn-Ca Alloys through High Pressure Torsion and Subsequent Heat Treatment. Materials, 12(15) (2019), 2460.

Körbler N., T. Ebner, S. Luidold, H. Antrekowitsch, C. Czettl, C. Storf, A. Clarke and K. Clarke:
Layer growth in Co(W)-Zn systems at hard metal recycling. JOM – The Journal of the minerals, metals & materials society (2019, Vol. 72 (2), pp 847-853.

Leuchtenmüller M., J. Antrekowitsch and S. Steinlechner:
A Kinetic Study Investigating the CarbothermicRecovery of Chromium from a Stainless-Steel Slag. Metallurgical and Materials Transactions B (2019), pp 1-8

Luidold, S.:
Chapter 16 – Recycling of technological metals: Fundamentals and technologies. In: Sustainable Resource Recovery and Zero Waste Approaches. Elsevier B.V. 2019. ISBN 978-0-444-64200-4.

Luidold, S.:
Chapter 16 – Recycling of technological metals: Fundamentals and technologies. In: Sustainable Resource Recovery and Zero Waste Approaches. Elsevier B.V. 2019. ISBN 978-0-444-64200-4.

Pfandl K., B. Küppers, S. Scheiber, G. Stockinger, J. Holzer, R. Pomberger, H. Antrekowitsch and D. Höllen:
XRF Sorting of Non-Ferrous Metal Fraction form MSWI Bottom Ash Processing Depending on Particle Surface Properties. Waste Management und Research, 2019

Pichler C., C.Wagner, D.Kreuzer, S. Luidold and C. Sagadin:
Advanced Thermodynamic Modeling in the Pyrometallurgy – Refractory Corrosion Simulations. Copper 2019, Vancouver, Canada, 2019

Pogatscher S., P. J. Uggowitzer, W. Fragner:
Fortschritte in der Aushärtung von Aluminiumlegierungen. Dialog: Materialwissenschaft und Werkstofftechnik: Leichtbau Leichtbauwerkstoffe 1 (2019)

Quick C. R., J. E. K. Schawe, P. J. Uggowitzer and S. Pogatscher:
Measurement of specific heat capacity via fast scanning calorimetry—Accuracy and loss corrections. Thermochimica Acta 677 (2019), 12–20

Sagadin C., S. Luidold, C.Wagner, C. Pichler and A. Spanring:
Modeling of Refractory Corrosion by Thermodynamic Simulation. EMC 2019, Düsseldorf, Deutschland, 2019

Schatzmann W. and J. Antrekowitsch:
Assessment of by-products – from waste to values. Wastes: Solutions, Treatment and Opportunities, Lissabon, Portugal, 2019

Schmid F., L. Stemper, T. Ebner und S. Pogatscher:
Industry-oriented sample preparation of 6xxx and 5xxx aluminum alloys in laboratory scale. Proc. of EMC (2019), Düsseldorf, Deutschland, 639–651

Schmid F., P. Uggowitzer, R. Schaeublin, M. Werinos, T. Ebner und S. Pogatscher:
Effect of Thermal Treatments on Sn-Alloyed Al-Mg-Si Alloys. Materials, 2019, 1801

Steinlechner S.:
Extraction of Indium and Silver aside of Zinc from Jarosite residue. Proceedings of European Metallurgical Conference (2019), Düsseldorf, Deutschland

Steinlechner S. and J. Antrekowitsch:
Extraction of Zinc, Silver and Indium via Vaporization from Jarosite Residue. REWAS TMS 2019, San Antonio, USA, 2019

Stemper, L., B. Mitas, T. Kremmer, S. Otterbach, P.J. Uggowitzer and S. Pogatscher:
Age-hardening of high pressure die casting AlMg alloys with Zn and combined Zn and Cu additions. in Journal of materials and design, Volume 181 (2019)

Tunes M. A., G. Greaves, T. Kremmer, V. M. Vishnyakov, P. D. Edmondson, S. E. Donnelly S. Pogatscher and C. G. Schön:
Thermodynamics of an austenitic stainless steel (AISI-348) under in situ TEM heavy ion irradiation. Acta Materialia 179 (2019), 360–371

Wibner S. and H. Antrekowitsch:
Recycling of aluminium with variation of the scrap processing techniques. Proceedings of European Metallurgical Conference (2019), Düsseldorf, Deutschland, 1151– 1161

Antrekowitsch J. and G. Hanke:
Steel Mill Dust — Only a Zinc Resource or a Potential Material for Multi Metal Recycling?. Proc. of SIPS 2018, online proceedings

Bolitschek J., S. Luidold and M. O’Sullivan:
A study of the impact of reduction conditions on molybdenum morphology. International Journal of Refractory Metals and Hard Materials 71 (2018), 325–329

Bolitschek J., S. Luidold and M. O’Sullivan:
Correlation of reduction conditions and MoO2 characteristics on the evolving Mo morphology during hydrogen reduction. Powdermet, San Antonio, USA, 2018

Dumitraschkewitz P., S. S. A. Gerstl, L. T. Stephenson, P. J. Uggowitzer and S. Pogatscher:
Clustering in Age-Hardenable Aluminum Alloys. Adv. Eng. Mater., 2012, 2018, 1800255

Ebner T., C. Sagadin and S. Wibner:
Hauptexkursion des Lehrstuhls für Nichteisenmetallurgie der Montanuniversität Leoben 2018. Erzmetall World of Metallurgy, Vol.71, (2018) No.6, 344–346

Ebner T., S. Luidold, M. Honner, H. Antrekowitsch and C. Czettl:
Conditioning of Spent Stripping Solution for the Recovery of Metals. Metals 8 (2018), 757

Echterhof T., T. Willims, S. Preiß, M. Omran, T. Fabritius, D. Mombelli, C. Mapelli, S. Steinlechner, I. Unamuno, D. Mudersbach and T. Griessacher:
Developing a new process to agglomerate secondary raw material fines for recycling in the electric arc furnace – the Fines2EAF project Clean Tech 4 (2018), Bergamo, Italien, online proceedings

Hofer D., S. Luidold, T. Beckmann and F. Schulenburg:
High Temperature Characteristics of Slags Originating from the Production of Synthetic Tantalum Concentrate. Extraction 2018, Peter Hayes Symposium on Pyrometallurgical Processing, Ottawa, Kanada, 2018, 1007–1015

Kücher G., S. Luidold, C. Czettl and C. Storf:
First evaluation of semidirect recycling methods for the reclamation of cemented carbides based on a literature survey. RevistaMatéria 23, 2, 2018, 1–7

Kücher G., S. Luidold, C. Czettl and C. Storf:
Lixiviation kinetics of cobalt from cemented carbides. Int. Journal of Refractory Metals and Hard Materials 70 (2018), 239–245

Kücher G., S. Luidold, C. Czettl and C. Storf:
Influence of Substrate Properties on the Selective Leaching Performance of Cobalt from Cemented Carbides. Extraction 2018, Processing of Critical Materials, Ottawa, Kanada, 2018, 2829–2836

Pichler C., J. Antrekowitsch and K. Pilz:
Pyrometallurgical Processing of Desulphurization Slags. Proceeding of Extraction 2018, 127–135

Pogatscher S., D. Leutenegger, J. E. K. Schawe, P. Maris, R. Schäublin, P. J. Uggowitzer and J. F. Löffler:
Monotropic polymorphism in a glass-forming metallic alloy. Journal of Physics: Condensed Matter 30, 23, 2018, 234002

Sagadin C., S. Luidold, C. Wagner and A. Spanring:
Evaluation of High Temperature Refractory Corrosion by Liquid Ferronickel Slags. Bulletin – The Journal of Refractory Innovations, (2018) Issue 1, 38–41

Sagadin C., S. Luidold, C. Wagner, A. Spanring and T. Kremmer:
Phase Reactions Between Refractory and High-Acidic Synthetic CaO-Ferronickel Slag. The Journal of The Minerals, Metals & Materials Society (JOM), Fundamental Aspects of High-Temperature Metallurgical Processing, Vol.70, (2018) No.1, 34−40

Sagadin C., S. Luidold, C. Wagner and A. Spanring:
Influence of several Oxides on the Melting Behaviour of Ferronickel Slags. Infacon XV: International Ferro-Alloys Congress, Cape Town, South Africa, 2018

Sagadin C., S. Luidold, C. Wagner and A. Spanring:
Determination of the high temperature melting behaviour of synthetic ferronickel slags. Proc. of SIPS 2017, Vol.1, Sustainable Industrial Processing Summit, Cancun, Mexiko, 2018, 235–242

Sagadin C., S. Luidold, C. Wagner and A. Spanring:
High Temperature Phase Formation at the Slag/Refractory Interphase at Ferronickel Production. Extraction 2018, 7th International Symposium on Advances in Sulfide Smelting, Ottawa, Kanada, 2018, 137–147

Scheiber S. and H. Antrekowitsch:
Effects of zinc addition on microstructure of SnCu3.5Ni0.3 alloy. Conference Proceedings of International Students’ Day of Metallurgy (2018), Freiberg, Deutschland, 181–188

Sorger C., S. Luidold, S. Konetschnik and T. Haslinger:
Pyrometallurgical processing and slag analysis of waste electrical and electronic equipment. Proc. of SIPS 2017, Vol.7, Sustainable Industrial Processing Summit, Cancun, Mexiko, 2018, 86–100

Sorger C., S. Luidold and S. Konetschnik:
Hydrometallurgical Treatment of an Atomized Copper Alloy Gained from WEEE. World of Metallurgy – Erzmetall 71 (4), 2018, 208–213

Spierings A. B., K. Dawson, P. Dumitraschkewitz, S. Pogatscher and K. Wegener:
Microstructure characterization of SLM-processed Al-Mg-Sc-Zr alloy in the heat treated and HIPed condition. Additive Manufacturing, 20, 2018, 173–181

Steinacker S. R. and J. Antrekowitsch:
Aspectos de la formación de polvo volátil en la industria del cobre primario. RevistaMatéria 23, 2, 2018, 1–6

Steinlechner S.:
Characterization and process development for the selective removal of Sn, Sb, and As from anode slime obtained from electrolytic copper refining. Journal of Mining and Metallurgy, Section B: Metallurgy (2018), 54, 1, 81–89

Steinlechner S. and J. Antrekowitsch:
Thermodynamic considerations for a pyrometallurgical extraction of indium and silver from a jarosite residue. Journal of Metals (2018)

Wegscheider S., J. Antrekowitsch and S. Steinlechner:
Recycling of jarosite and electric arc furnace dust in a metal bath process to recover valuable metals. Proc. of SIPS 2017, Vol.7, Sustainable Industrial Processing Summit, Cancun, Mexiko, 2018, 103–110

Zschiesche C., M. Ayhan and J. Antrekowitsch:
Challenges and Opportunities of a Lead Smelting Process for Complex Feed Mixture. Proceeding of Extraction 2018, 325–338

Antrekowitsch J. and G. Hanke:
Silver and Gold recovery from dumps out of metallurgical operations. Proceedings of Annual Conference of International Precious Metals Institute (2017), online proceedings

Benigni C., C. Pichler and J. Antrekowitsch:
Impurities of secondary zinc oxides as limiting factors for the primary industry. Proc. of COM (2017), Vancouver, Kanada

Benigni C., C. Pichler and J. Antrekowitsch:
Zinc oxide from steel mill dust – A wide range of opportunities. Proc. of ESTAD (2017), Wien, Österreich

Bolitschek J., S. Luidold and M. O’Sullivan:
A study of the impact of reduction conditions on molybdenum morphology. Proceeding 19th Plansee Seminar 2017, Reutte, Österreich, RC12

Doppler T., H. Antrekowitsch, H. Böttcher and W. Fragner:
Implications when alloying Magnesium into Aluminium Melt. Proceedings of European Metallurgical Conference (2017), Leipzig, Deutschland, 931–942

Dumitraschkewitz P., H. Clemens, S. Mayer and D. Holec:
Impact of alloying on stacking fault energies in ϒ-TiAl. Applied Sciences. 2017, 7, 1193

Ebner T., C. Kerschbaumer, G. Kücher, S. Luidold, C. Storf, C. Czettl, T. Wolfe and A. Smith:
Ausgangsbedingungen und Verfahren für das Recycling von Wolframkarbid-Verbundwerkstoffen. Österreichische Wasser- und Abfallwirtschaft (2017), 69, 11–12, 482–494

Ebner, T., S. Luidold, H. Antrekowitsch, C. Storf and C. Czettl:
Phase formation in Co(Ru)-Zn diffusion couples. Proceeding 19th Plansee Seminar 2017, Reutte, Österreich, RC11

Gregurek D., V. Reiter, A. Franzkowiak, A. Spanring, B. Drew, C. Pichler and D.R. Flynn:
The benefits and knowledge gained in refractory testing with slag an nickel matte. Journal of the Southern African Institute of Mining and Metallurgy (2017), Johannesburg, South Africa, vol. 117, No. 8, 829–838

Kapp M.W., T. Kremmer, C. Motz, B. Yang and R. Pippan:
Structural instabilities during cyclic loading of ultrafine-grained copper studied with micro bending experiments. Acta Materialia 125 (2017), 351–358

Kerschbaumer C., S. Luidold, T. Wolfe and A. Smith:
Leaching kinetics for semi-direct recycling of drill bits. Proceeding 19th Plansee Seminar (2017), Reutte, Österreich, RC3

Kerschbaumer C., S. Luidold, T. Wolfe and A. Smith:
Leaching behavior of hard metals used in drilling industry. Proceedings of European Metallurgical Conference (2017), Leipzig, Deutschland, 171–186

Kolb Gernot K.-H., H. Antrekowitsch, D. Pöschmann, P. J. Uggowitzer and S. Pogatscher:
Effect of Interrupted Quenching on Al-Zn-Mg-Cu alloys. Light Metals 2017, 385–389

Kücher G., S. Luidold, C. Czettl and C. Storf:
Disclosure of the Kinetic Relations of Semidirect Cemented Carbide Leaching in Acid Media. Rare Metal Technology 2017, Proceeding TMS (2017), San Diego, USA, 159–165

Kücher, G., S. Luidold, C. Czettl and C. Storf:
Insights regarding the reaction rate of Co during the leaching of a hard metal substrate in hydrochloric media. Proceeding 19th Plansee Seminar 2017, Reutte, Österreich, RC6

Patscheider St., H. Flachberger and J. Antrekowitsch:
Orientierende Untersuchungen zum Einsatz von Klassierprozessen in der Nichteisenmetallurgie. BHM Berg- und Hüttenmännische Monatshefte, 8/2017, 345–351

Pichler C., Antrekowitsch J. and Pilz K.:
Thermische Behandlung von Entschwefelungsschlacke aus der Eisen- und Stahlindustrie. Mineralische Nebenprodukte und Abfälle (2017), Berlin, Deutschland, 223–237

Pichler C. and J. Antrekowitsch:
Pyrolysis Gas as a Renewable Reducing Agent for the Recycling of Zinc- and Lead-Bearing Residues: A Status Report. JOM (2017),
doi:10.1007/s11837-017-2341-7

Pichler C., S. Steinlechner and J. Antrekowitsch:
Primary Lead Slags – A potential Secondary Resource. World of Metallurgy – Erzmetall, 70/2017, 1, 33–41

Sagadin C., S. Luidold, C. Wenzl and C. Wagner:
Evaluation of High Temperature Refractory Corrosion by Liquid Al2O3–Fe2O3–MgO–SiO2. 8th International Symposium on High-Temperature Metallurgical Processing, Proceeding TMS (2017), San Diego, USA, 161–168

Scheiber S. and H. Antrekowitsch:
Investigation of phase formation in tin alloys. Proceedings of European Metallurgical Conference (2017), Leipzig, Deutschland, 377–387

Sorger C., S. Luidold and S. Konetschnik:
Laugungsverhalten von Kupfer aus einer Elektro- und Elektronikaltgerätefraktion. Recycling und Rohstoffe, Band 10, Recycling- und Rohstoffkonferenz, Berlin, Deutschland, 2017, 391–404

Steinacker S. and J. Antrekowitsch:
Hydrometallurgical Treatment of a Copper-Iron-Molybdenum Alloy. World of Metallurgy – Erzmetall (2017), 70, 6, 319–326

Steinacker S. and J. Antrekowitsch:
Treatment of Residues from the Copper Industry with an Alternative Approach for Electric Furnace Slag. Berg- und Hüttenmännische Monatshefte (2017), 162, 7, 252–257

Steinacker S. and J. Antrekowitsch:
The Role and Influence of Impurities on the Quality of Copper Cathodes. The Publications of the MultiScience – XXXI. microCAD International Multidisciplinary Scientific Conference (2017), Miskolc, Ungarn, 1–8

Steinacker S. and J. Antrekowitsch:
Investigation of the Leaching Behavior of a Copper-Iron-Molybdenum Alloy in H2SO4. Proceedings of ALTA 2017 (2017), Perth, Australien, 306–313

Steinlechner S.:
Characterization and process development for the selective removal of Sn, Sb, and As from anode slime obtained from electrolytic copper refining. Journal of Mining and Metallurgy, Section B: Metallurgy (2018), 54, 1, 81–89

Steinlechner S.:
Present status in the recycling of industrial residues from lead, zinc and copper industry and their possible future contribution to the supply of selected minor elements, like silver. Proceedings of METAL 2017 (2017), Brünn, Tschechische Republik, online proceedings

Wegscheider S., G. Hanke, S. Steinlechner and J. Antrekowitsch:
Process development for a combined treatment of EAFD and jarosite. Proc. of Wastes: Solutions, Treatments and Opportunities (2017), Porto, Portugal, 37–43

Zöhrer M. and H. Antrekowitsch:
Konditionierung und Recycling aluminiumhaltiger Reststoffe minderer Qualität. Umweltschutz, 02/2017, 14–17

Angerer T., S. Hofer and H. Antrekowitsch:
Werkstoffentwicklung bleifreier Messinglegierungen (Teil 3/3). Metall 70 (2016), No. 4, 136–142

Antrekowitsch J.:
By-products and their contribution to a sustainable metal production. Proc. of SIPS 2016, Sustainable Industrial Processing, China, 2016

Antrekowitsch J.:
Recycling of Poly-Metallic Residues from Metal Industry – Current Status and Future Developments. Proc. Of TMS 2016, 145 Annual Meeting & Exhibition – REWAS, Nashville, USA, 2016

Antrekowitsch J. and S. Steinlechner:
Iron aa a limiting factor in the direct leaching of waelz oxides, Proc. of COM 2016 – 55th Conference of Metallurgists hosted by IMPC 2016, Quebec City, Kanada, 1–9

Benigni C., C. Pichler and J. Antrekowitsch:
Halides – Associated problems during the zinc production process. Proc. of OPMR (2016), Budapest, Ungarn, 149–154

Cattini L., H.Schmid, W. Martinelli and J. Rieger:
Aktueller Entwiklungsstand der Metallrückgewinnung und Chromabtrennung aus LD-Schlacken. Proc. of Schlacken-Saymposium (2016), Meitingen, 89–102

Dumitraschkewitz P., S. S. A. Gerstl, P. J. Uggowitzer, J. F. Löffler and S. Pogatscher:
Atom Probe Tomography Study of As-Quenched Al–Mg–Si Alloys. Advanced Engineering Materials, 2016

Kolb G., S. Scheiber, H. Antrekowitsch, P. J. Uggowitzer, D. Pöschmann and S. Pogatscher:
Differential Scanning Calorimetry and Thermodynamic Predictions – A Comparitive Study of Al-Zn-Mg-Cu Alloys. Metals 6, 8, 180–193

Kücher G., S. Luidold, C. Czettl and C. Storf:
Evaluación inicial basada en una revisión literaria de métodos semidirectos de la recuperación de carburos cementados. 16º SAM-CONAMET Congreso Internacional de Metalurgia y Materiales, Córdoba, Argentinien, (2016), online proceedings

Leuchtenmueller M., G. Roesler and J. Antrekowitsch:
Recovery of Chromium from Stainless Steel Slags. The Publications of the MultiScience – XXX microCAD International Multidisciplinary Scientific Conference, University of Miskolc, Hungery, 2016

Luidold, S., C. Wenzl, C. Wagner and C. Sagadin:
High temperature corrosion mechanisms of refractories and ferro-alloy slags. 10th International Conference on Molten Slags, Fluxes and Salts, Seattle, USA (2016)

Pichler C., Antrekowitsch J. and Pilz K.:
Thermal processing of desulphurization slags. Proc. of 14th International Symposium on the desulphurization of hot metal and steel (2016), Athen, Griechenland, 73–80

Pogatscher S., S. Gerstl, J. F. Löffler and P. J. Uggowitzer:
Mikrolegieren von Aluminiumwerkstoffen der 6xxx-Familie. 9. Ranshofener Leichtmetalltage (2016), Bad Ischl, Österreich, 12–21

Pogatscher S., D. Leutenegger D., Schawe J., P.J. Uggowitzer and J.F. Löffler:
Solid-solid phase transitions via melting in metals. Nature Communications 7 (2016)

Poscher, A., S. Luidold, H. Schnideritsch and H. Antrekowitsch:
Extraction of lanthanides from spent polishing agent. Rare Earth Industry: Technological, Economic, and Environmental Implications (2016) 209-222

Rösler G., C. Pichler, S. Steinlechner and J. Antrekowitsch:
Mini Mill Solutions in the Recycling of Electric Arc Furnace Dust – The 2sDR Process. Proc. of REWAS 2016, Nashville Tennessee, 43–48

Sagadin C., S. Luidold, C. Wagner and C. Wenzl:
Melting Behaviour of Ferronickel Slags. JOM – The Journal of The Minerals, Metals & Materials Society (TMS), Alloys and Production, Vol.68, (2016) No.12, 3022−3028

Schawe J.E. and S. Pogatscher:
Material characterization by fast scanning calorimetry: practice and applications. Fast Scanning Calorimetry, Springer, 2016, 3–80

Schlögl C. and H. Antrekowitsch:
Impact of different alloying additives and pre-treatments on the anodising behaviour of AA2007. Surface and Interface Analysis (2016)

Sorger C., S. Luidold, I. Filzwieser, A. Filzwieser and S. Konetschnik:
Thermodynamic Investigations for the Separation and Processing of different Metals from waste electrical and electronic equipment. Copper 2016, Kobe, Japan, 2610–2621

Steinacker S., Antrekowitsch J., Wibner S. and C. Wibner:
Copper Recovery from Sulfidic Particles in Electric Furnace Slag. World of Metallurgy – Erzmetall 69 (5/2016),  261–268

Steinacker S., Wegscheider S., Kirchheimer K. and A. Penz:
Hauptexkursion des Lehrstuhls für Nichteisenmetallurgie der Montanuniversität Leoben 2016. World of Metallurgy – Erzmetall 69 (6/2016), 342–344

Steinacker S., Antrekowitsch J. and H. Schnideritsch:
Investigation and Pyrometallurgical Reduction of Copper Compounds from Electric Furnace Slag. Proceedings of Copper 2016, Kobe, Japan

Steinacker S. and J. Antrekowitsch:
Aspectos de la Formación de Polvo Volátil en la Industria del Cobre Primario. Libro de Resumenes 16º SAM-CONAMET Congreso Internacional de Metalurgia y Materiales, Córdoba, Argentina

Steinacker S. and J. Antrekowitsch:
Treatment of Residues from the Copper Industry Including a New Approach for Electric Furnace Slag. Proceedings of OPMR 2016, Budapest, Hungary

Steinacker S. and J. Antrekowitsch:
Kinetic Investigation of the Electric Furnace Copper Slag Treatment. Collected Proceedings of the TMS 2016 145th Annual Meeting, Nashville, TN, USA

Steinacker S. and J. Antrekowitsch:
Recyclingmethoden für Reststoffe aus der Kupfermetallurgie. Recycling und Reststoffe: Band 9, TK Verlag Karl Thomé-Kozmiensky, S. 497-512, Nietwerder, Deutschland

Steinlechner S. and  J. Antrekowitsch:
Residues from Lead, Zinc and Copper Industry and their Possible Contribution to the Supply of Selected Minor Elements. Proc. of COM 2016 – 55th Conference of Metallurgists hosted by IMPC 2016, Quebec City, Kanada, 1–8

Steinlechner S.:
Potential Contribution to the Supply of Silver by the Recycling of Industrial Residues from Zn, Pb, and Cu Plants, Process. Proc. of REWAS 2016, Nashville Tennessee, 23–28

Stuhlpfarrer P., S. Luidold, H. Schnideritsch and H. Antrekowitsch:
New preparation and recycling procedure to recover rare earth elements from magnets by using a closed loop treatment. Mineral Processing and Extractive Metallurgy, Trans. Inst. Min. Metall. C, Vol. 125, No. 4, 2016, 204–210

Stuhlpfarrer P., S. Luidold and H. Antrekowitsch:
Recycling of waste printed circuit boards with simultaneous enrichment of special metals by using alkaline melts: A green and strategically advantageous solution. Journal of Hazardous Materials 307 (2016), 17–25

Uggowitzer P. J., M. Cihova, D. Horwatitsch, T. Hametner, S. Pogatscher, D. Klaumünzer and J. F. Löffler:
Designkonzepte für niedriglegierte hochfeste Magnesiumlegierungen. 9. Ranshofener Leichtmetalltage (2016), Bad Ischl, Österreich, 109–118

Wagner, C., C. Wenzl, D. Gregurek, D. Kreuzer, S. Luidold and H. Schnideritsch:
Thermodynamic and experimental investigation of high temperature refractory corrosion by molten slags. Bale-Symposium (TMS), Nashville, USA (2016)

Wegscheider S., S. Steinlechner and M. Leuchtenmüller:
Innovative concept for the recovery of silver and indium by a combined treatment of jarosite and electric arc furnace dust, JOM (2016)

Wegscheider S. and S. Steinlechner:
Residues from the zinc industry – a potential future resource for silver and indium: Proc. of COM 2016 – 55th Conference of Metallurgists hosted by IMPC 2016, Quebec City, Kanada, 41

Wegscheider S. and S. Steinlechner:
Thermodynamic considerations regarding the volatilization behavior of silver and indium from jarosite by a pyrometallurgical treatment. Multi Science – XXX microCAD International Multidisciplinary Scientific Conference, University of Miskolc, Miskolc, Hungary 2016

Werinos M., H. Antrekowitsch, T. Ebner, R. Prillhofer, W.A. Curtin, P.J. Uggowitzer and S. Pogatscher:
Design strategy for controlled natural aging in Al-Mg-Si alloys. Acta Materialia 118 (2016), 296–305

Werinos M., H. Antrekowitsch, T. Ebner, R. Prillhofer, P.J. Uggowitzer and S. Pogatscher:
Hardening of Al–Mg–Si alloys: Effect of trace elements and prolonged natural aging. Materials & Design 06 (2016)

Zöhrer M., H. Antrekowitsch and F. Duspiva:
Konditionierung und Recycling aluminiumhaltiger Reststoffe minderer Qualität. Recy & DepoTech (2016), Leoben, Österreich, 129–134

Angerer T., S. Hofer and H. Antrekowitsch:
Neue Generation bleifreier Kuper-Zink-Legierungen auf Kupfer-Silizium-Mangan-Basis. Metall 69 (2015) No. 11, 431–435

Angerer T., S. Hofer and H. Antrekowitsch:
Development of a lead-free brass alloy. Proc. of EMC 1 (2015), Düsseldorf, Deutschland, 221–230

Antrekowitsch H, S. Luidold, J. Antrekowitsch, S. Pogatscher, S. Steinlechner:
Aktuelle Entwicklungstrends und zukünftige Herausforderungen im Bereich der Nichteisenmetallurgie. Berg- und Hüttenmännische Monatshefte: BHM (2015) 1–6

Antrekowitsch H., C. Pichler and R. Rumpold:
New development in metal recovery from secondary resources. 4th Slag Valorisation Symposium Zero Waste, Leuven, Belgien, 15–17.04.2015

Antrekowitsch J.:
Stahlwerksstaubrecycling im 21.Jahrhundert – aktuelle Entwicklungen und zukünftige Herausforderungen. Recycling und Rohstoffe, Karl J. Thomé-Kozmiensky (Hrsg), TK Verlag, 2015, S. 363-370

Antrekowitsch, J. and G. Rösler:
Steel mill dust recycling in the 21st century. Proc. of XXIX. microCAD International Multidisciplinary Scientific Conference (2015), Miskolc, Hungary

Antrekowitsch J, Rösler G, Steinacker S.:
State of the Art in Steel Mill Dust Recycling. Chemie-Ingenieur-Technik. 2015 ;87 (11):1498-1503

Antrekowitsch J. and S. Steinlechner:
The current status of mini mill solutions for the recycling of steel mill dusts. Proc. Of SIPS2015 – Sustainable Industrial Processing Summit and Exhibition, Antalya, Turkey (2015)

Benedek L., S. Luidold and H. Antrekowitsch:
Challenges regarding recycling of REEs from permanent magnets in a WEEE-fraction. Proc. of EMC 2 (2015), Düsseldorf, Deutschland, 785–797

Ebner T., G. Kücher, S. Luidold, H. Schnideritsch, C. Czettl, C. Storf and H. Antrekowitsch:
Reuse of metal cutting tools by wet chemical decoating. Proc. of EMC 2 (2015), Düsseldorf, Deutschland, 725–738

Gregurek D., A. Ressler, A. Spanring and C. Pichler:
Example oft he Refractory Corrosion Test Work with Nickel Matte. Proc. 6th International Symposium on High Temperature Metallurgical Processing (2015), Orlando (USA)

Hofstetter J., S. Rüedi, I. Baumgartner, H. Kilian, B. Mingler, E. Povoden-Karadeniz, S. Pogatscher, P.J. Uggowitzer and J.F. Löffler:
Processing and microstructure–property relations of high-strength low-alloy (HSLA) Mg–Zn–Ca alloys. Acta Materialia 98 (2015), 423–432

Hofer S., T. Angerer and H. Antrekowitsch:
Werkstoffentwicklung bleifreier Messinglegierungen (Teil 1/3). Metall 69 (2015) No. 3, 82–87

Hofer S., T. Angerer and H. Antrekowitsch:
Werkstoffentwicklung bleifreier Messinglegierungen (Teil 2/3). Metall 69 (2015), No. 6, 240–244

Hofstetter J., E. Martinelli, S. Pogatscher, P. Schmutz, E. Povoden-Karadeniz, A. Weinberg, P. Uggowitzer and J. Löffler:
Influence of trace impurities on the in vitro and in vivo degradation of biodegradable Mg–5Zn–0.3Ca alloys. Acta Biomaterialia 23 (2015), 347–353

Hutabarat I., H. Schnideritsch, A. Poscher, C. Sobotka and H. Antrekowitsch
Characterisation and Thermal Behavior of Indonesian Copper Sulphides for Leaching Process. Proc. of EMC 1 (2015), Düsseldorf, Deutschland, 171–188

Koch S., M. Abad, S. Renhart, H. Antrekowitsch and P. Hosemann:
A high temperature nanoindentation study of Al-Cu wrought alloy. Materials Science and Engineering A (2015), Volume 644, 218–224

Kremmer T., H. Antrekowitsch, G. Mori, P. Oberhauser and G. Hanko:
Impact of microstructural characteristics on the corrosion morphology of high strength brazing sheets. Proc. of EMC 1 (2015), Düsseldorf, Deutschland, 277–287

Luidold S.:
Challenges in the field of extractive metallurgy of technological metals. Proc. of EMC 2 (2015), Düsseldorf, Deutschland, 747–758

Osthof H., S. Steinlechner and J. Antrekowitsch:
Alternative Models for the Calculation of CAPEX and OPEX for a Hydrometallurgical Plant. Proc. Of the 8th Southern African Base Metals Conference, Livingstone, Zambia (2015)

Pichler C., A. Unger and J. Antrekowitsch:
Rückgewinnung von Wertmetallen aus Stahlwerksstäuben durch ein reduzierendes Metallbad. Aschen-Schlacken-Stäube. Berlin, Deutschland, 23.–24. September 2013, 587–598

Pichler C. and J. Antrekowitsch:
Recycling of Zinc and Lead Bearing Residues with Pyrolysis Gas. JOM (2015) Vol. 67 (9), 2038-2046

Pichler C. and J. Antrekowitsch:
Strategies for the treatment of metallurgical recycling slags. Proc. of Wastes: Solutions, Treatments and Opportunities (2015), Viana do Castelo, Portugal, 221-227

Pichler C. and J. Antrekowitsch:
Sustainable ways to recycle metallurgical residues in the 21st century. Proc. of Lead&Zinc (2015), Düsseldorf, Deutschland, 65-74

Pirker A., H. Antrekowitsch, M. Kettner, W. Fragner and H. Suppan:
Recycling of aluminium scrap via salt process. Proc. of EMC 1 (2015), Düsseldorf, Deutschland, 343–357

Pirker A., H. Antrekowitsch, W. Fragner, H. Suppan and M. Kettner:
Optimization oft he Al-recycling Process for Low Grade Scrap. BHM Berg- und Hüttenmännische Monatshefte 160. Jg., 2015, 320–327

Pogatscher S., H. Antrekowitsch, M. Werinos, G. Rank, A. Kaiß, R. Prillhofer, J. Löffler and P. Uggowitzer:
Statistical and Thermodynamic Optimization of Trace-Element Modified Al-Mg-Si-Cu Alloys. TMS Light Metals (2015), Orlando, USA, 265–270

Pogatscher S., S.S.A. Gerstl, J.F. Löffler and P.J. Uggowitzer:
Atom probe tomography investigations of modified early stage clustering in Si containing aluminum alloys. Acta Physica Polonica A, 128 (2015), 643–646

E. Povoden-Karadeniz, Lang P., Moszner F., Pogatscher S., Uggowitzer P.J. and Kozeschnik E.:
Thermodynamics of Pd-Mn phases and extension to the Fe-Mn-Pd system. Calphad 51 (2015) 314–333

Ratschbacher K. and S. Luidold:
Kinetics and Optimization of Refractory Metal Alloy Oxidation and Sublimation. Chem. Ing. Tech. 2015, 87, No. 11, 1558–1568

Ratschbacher K. and S. Luidold:
Oxidation kinetics of a molybdenum-tantalum-alloy. Proc. of EMC 2 (2015), Düsseldorf, Deutschland, 771–782

Rösler G.:
Lead Slag – A possible secondary resource to recover valuable metals out of a waste. 2015. Procedings of 4th International Secondary Lead Conference, Bangkok, Thailand

Rösler G, Pichler C, Wegscheider S, Antrekowitsch J.:
Sustainable Recovery of Heavy Metals from Metallurgical Dust – the 2sDR process. in Proceedings PbZn 2015: Volume 2. GDMB. 2015. S. 877-886, Düsseldorf, Deutschland

Rösler G, Antrekowitsch J.:
Product upgrade of Waelz oxide using an altenative method. 2015. Proceedings of MultiScience – XXIX. microCAD, Miskolc, Ungarn

Schlögl C. and H. Antrekowitsch:
Anodising of Recycling Aluminium. World of Metallurgy – Erzmetall, 68, 2015, 299–306

Schumacher P., S. Pogatscher, M. Starink, O. Keßler, C. Schick, V. Mohles, et al.:
Control of precipitation during heat treatments based on DSC experiments. International Conference on Solid-Solid Phase Transformations in Inorganic Materials, PTM2015. Whistler (2015). Canada

Schumacher P., S. Pogatscher, M. Starink, C. Schick, V. Mohles and B. Milkereit:
Quench-induced precipitates in Al-Si alloys: Calorimetric determination of solute content and characterisation of microstructure. Thermochimica Acta 602 (2015), 63–73

Sorger C., P. Stuhlpfarrer, S. Luidold and H. Antrekowitsch:
Effects of pyrolysis on the metallurgical processing of waste electrical and electronic equipment. Proc. of EMC 2 (2015), Düsseldorf, Deutschland, 819–831

Steinacker S., R. Rumpold and J. Antrekowitsch:
Behandlung und Verwertung der Reststoffe aus der Kupfer-Metallurgie. Mineralische Nebenprodukte und Abfälle 2 (2015), TK Verlag, Berlin, Deutschland

Steinacker S., H. Schnideritsch and J. Antrekowitsch:
Thermodynamic Aspects of Flue Dust Formation in the Primary Copper Industry. Proc. Of the 54th Annual COM (2015), MetSoc, Toronto, Kanada

Steinacker S. and J. Antrekowitsch:
Thermodynamic Considerations for Primary Copper Flue Dust. World of metallurgy – Erzmetall 68 (8/2015), p. 328-335

Steinacker S. and S. Wegscheider:
Hauptexkursion des Lehrstuhls für Nichteisenmetallurgie der Montanuniversität Leoben 2015. World of metallurgy – Erzmetall 68 (8/2015), p. 367-369

Steinacker S., R. Rumpold and J. Antrekowitsch:
Recycling of Residues from the Copper Industry. Proc. of EMC 1 (2015), Düsseldorf, Deutschland, 119–132

Steinlechner S. and J. Antrekowitsch:
Potential of a Hydrometallurgical Recycling Process for Catalysts to Cover the Demand for Critical Metals, Like PGMs and Cerium. JOM 67 (2015), No.2, 406–411

Steinlechner S. and J. Antrekowitsch:
POTENTIAL OF INDUSTRIAL WASTES RECYCLING FROM LEAD, ZINC OR COPPER INDUSTRY TO CONTRIBUTE TO THE SUPPLY OF MINOR METALS. Proc. Of SIPS2015 – Sustainable Industrial Processing Summit and Exhibition, Antalya, Turkey (2015)

Steinlechner S. and J. Antrekowitsch:
Potential of lead, zinc and copper containing residues to contribute to the supply of minor metals. Proc. of Wastes: Solutions, Treatments and Opportunities (2015), Viana do Castelo, Portugal, 341-357

Steinlechner S. and J. Antrekowitsch:
Recycling potential of precious metals from zinc, lead and copper containing residues. Proc. of EMC (2015), Düsseldorf, Deutschland

Stuhlpfarrer P., S. Luidold and H. Antrekowitsch:
Optimierung der pyrolytischen Vorbehandlung von Leiterplattenschrotten unter besonderer Betrachtung der Bromgewinnung. Recycling und Rohstoffe, Band 8, Recycling- und Rohstoffkonferenz, Berlin, Deutschland, 2015, 325-344

Stuhlpfarrer P., S. Luidold and H. Antrekowitsch:
Recycling of Nd2Fe14B-Magnets. Proc. of EMC 2 (2015), Düsseldorf, Deutschland, 925–938

Stuhlpfarrer P., S. Luidold and H. Antrekowitsch:
Recycling of Nd2Fe14B Magnets. World of Metallurgy – Erzmetall, 68, 2015, 278–285

Thurnheer P., R. Maaß, K. Laws, S. Pogatscher and J. Löffler:
Dynamic properties of major shear bands in Zr–Cu–Al bulk metallic glasses. Acta Materialia 96 (2015), 428–436

Wegscheider S., S. Steinlechner, C. Pichler, G. Rösler and J. Antrekowitsch:
The 2sDR process – Innovative treatment of Electric Arc Furnace Dust. Proc. of Wastes: Solutions, Treatments and Opportunities (2015), Viana do Castelo, Portugal, 355–360

Werinos M., H. Antrekowitsch, W. Fragner, T. Ebner, P. Uggowitzer and S. Pogatscher:
Influence of Alloy Production History on Natural Aging of AA6061 Modified with Sn. Proc. of EMC 1 (2015), Düsseldorf, Deutschland, 303–310

Werinos M., H. Antrekowitsch, W. Fragner, T. Ebner, P. Uggowitzer and S. Pogatscher:
Influence of temperature on natural aging kinetics of AA6061 modified with Sn. TMS Light Metals 2015 (2015) , Orlando, USA, 367–371

Werinos M.,  Antrekowitsch H., Kozeschnik E., Ebner T., Moszner F., Löffler J. F., Uggowitzer P. J. and S. Pogatscher:
Ultrafast artificial aging of Al–Mg–Si alloys. Scripta Materialia 112 (2015), 148–151

Zöhrer M., T. Angerer, H. Antrekowitsch and A. Kügele:
Recycling von Produktionsrückständen aus der metallverarbeitenden Industrie. Recycling und Rohstoffe, Band 8, Recycling- und Rohstoffkonferenz, Berlin, Deutschland, 2015, 271–384

Zöhrer M., T. Angerer, H. Antrekowitsch and F. Duspiva:
Treatment of industrial waste. Proc. of EMC 2 (2015), Düsseldorf, Deutschland, 833–844

Antrekowitsch J., S. Steinlechner, A. Unger, G. Rösler, C. Pichler and R. Rumpold:
Optimization and Biomass Utillization in Heavy Metal Recycling. BHM (2014) Vol. 159 (1), p. 23-29

Antrekowitsch J., S. Steinlechner, A. Unger, G. Rösler, C. Pichler and R. Rumpold:
Zinc and Residue Recycling. Handbook of Recycling, State-of-the-art for practitioners, Analysts, and Scientists, Seite 113 – 124

Benedek L., S. Luidold and H. Antrekowitsch:
Recyclingkonzepte für Photovoltaikmodule. DepoTech 2014, Leoben, 283–288

Benedek L., S. Luidold, H. Schnideritsch and H. Antrekowitsch:
Recyclingkonzepte für Photovoltaikmodule. Recycling und Rohstoffe, Band 7, Recycling- und Rohstoffkonferenz, Berlin, Deutschland, 2014, S. 231-250

Bösch D., M. Göken, M. Hummel, W. Fragner, P. Uggowitzer, S. Pogatscher and H. Höppel:
Secondary Al-Si-Mg High Pressure Die Casting Alloys with Enhanced Ductility. Metallugical and Materials Transactions A 46A (2014), 1035–1045

Hofstetter J., M. Becker, E. Martinelli, A. Weinberg, B. Mingler, H. Kilian, S. Pogatscher and P. Uggowitzer:
High-Strength Low-Alloy (HSLA) Mg–Zn–Ca Alloys with Excellent Biodegradation Performance. JOM 66 (2014), 566 – 572

Hofstetter J., S. Rüedi, K. Baumgartner, H. Kilian, J. Reiter, B. Mingler, S. Pogatscher and . et al.:
Hochfeste niedriglegierte (HSLA) Magnesiumlegierungen. 8. Ranshofener Leichtmetalltage, Geinberg (2014), Austria

Kaindl M., A. Poscher and S. Luidold:
Kreislaufschließung beim Recycling von NiMH-Batterien. Recycling und Rohstoffe, Band 7, Recycling- und Rohstoffkonferenz, Berlin, Deutschland, 2014, S. 321-339

Keppert T.A., G. Luckeneder, K.-H. Stellnberger, C. Commenda, G. Mori and H. Antrekowitsch:
The effect of magnesium on the corrosion of hot-dip galvanized steel in chloride containing environments. Materials and Corrosion, 65, No. 9, 2014, 871–880

Keppert T., G. Luckeneder, K. Stelnberger, G. Mori and H. Antrekowitsch:
The effect of sulphate, phosphate, nitrate and acetate on the corrosion behaviour of Zn-Al-Mg hot-dip galvanised steel. Materials and Corrosion 2014, 65, No. 6, 560-568

Kremmer T., H. Antrekowitsch, G. Mori, G. Hanko, P. Oberhauser and A. Hajek:
High strength brazing sheet with improved corrosion resistance. Aluminium Brazing 8th International Congress, Düsseldorf, Deutschland, 2014, 67-74

Kremmer T., H. Antrekowitsch, M. Kratzer, C. Teichert, G. Mori, G. Hanko and P. Oberhauser:
AMAG TopClad UHS: Der hochfeste Werkstoffverbund für hochbeanspruchte Wärmetauscher-Anwendungen. 8. Ranshofener Leichtmetalltage, Leichtmetalle – Prozesse – Anwendungen: Zukunftstechnologien als Basis für neue Mobilitätskonzepte, Geinberg, Österreich, 2014, S. 18–28

Luidold S. and H. Antrekowitsch:
Recovery of metals from different secondary resources (waste). Handbook of recycling: state-of-the-art for practitioners, analysts, and scientists, Amsterdam, Niederlande: Elsevier (2014), 255-268

Moszner F., E. Povoden-Karadeniz, S. Pogatscher, P. Uggowitzer, Y. Estrin, S. Gerstl, E. Kozeschnik and J. Löffler:
Reverse α′ → γ transformation mechanisms of martensitic Fe–Mn and age-hardenable Fe–Mn–Pd alloys upon fast and slow continuous heating. Acta Materialia 72 (2014), 99 – 109

Pichler C. and J. Antrekowitsch:
Alternative Verfahren zur Aufarbeitung von Stäuben aus der Stahlindustrie. Mineralische Nebenprodukte und Abfälle, Berlin, Deutschland, 30.06-01.07 2014, 399-409

Pirker A., H. Antrekowitsch, H. Suppan, M. Kettner and W. Fragner:
Characterisation of aluminium chips. Aluminium 2014 Conference, Proceeding Session Plant and Equipment II. (2014), Düsseldorf, Deutschland, S. 1 – 14

Pogatscher S., D. Leutenegger, A. Hagmann, P. Uggowitzer and J. Löffler:
Characterization of bulk metallic glasses via fast differential scanning calorimetry. Thermochimica Acta 590. (2014), 84–90

Pogatscher S., E. Kozeschnik, H. Antrekowitsch, M. Werinos, S. Gerstl, J. Löffler and P. Uggowitzer:
Process-controlled suppression of natural aging in an Al-Mg-Si alloy. Scripta Materialia 89 (2014), 53–56

Pogatscher S., H. Antrekowitsch, M. Werinos, B. Prillhofer and P. Uggowitzer:
Optimierung der Wärmebehandlung von Aluminiumwerkstoffen der 6xxx Familie. 8. Ranshofener Leichtmetalltage, Leichtmetalle – Prozesse – Anwendungen: Zukunftstechnologien als Basis für neue Mobilitätskonzepte. (2014), S. 136–142

Pogatscher S., H. Antrekowitsch, M. Werinos, F. Moszner, S. Gerstl, M. Francis, W. Curtin and P. Uggowitzer:
Diffusion on Demand to Control Precipitation Aging: Application to Al-Mg-Si Alloys. Phys. Rev. Lett. 112 (2014), 225701–225705

Pogatscher S., M. Werinos, H. Antrekowitsch and P. Uggowitzer:
The role of vacancies in the aging of Al-Mg-Si alloys. Materials Science Forum (2014), 1008 – 1013

Pogatscher S., P. Uggowitzer and J. Löffler:
In-situ probing of metallic glass formation and crystallization upon heating and cooling via fast differential scanning calorimetry. Applied physics letters 104. (2014), S. 251908–251908

Poscher A., S. Luidold, H. Schnideritsch and H. Antrekowitsch:
Recycling von Seltenen Erden sowie Antimon aus Reststoffen. Forum für Metallurgie und Werkststofftechnik, Onlinetagungsunterlagen (2014), Leoben, Österreich

Poscher, A., S. Luidold, H. Schnideritsch and H. Antrekowitsch:
Extraction of lanthanides from spent polishing agent. 1st European Rare Earth Resources Conference, Milos, Griechenland (2014)

Prillhofer B., G. Rank, J. Berneder, H. Antrekowitsch, P. Uggowitzer and S. Pogatscher:
Property Criteria for Automotive Al-Mg-Si Sheet Alloys. Materials 7. (2014), S. 5047–5068

Prillhofer R., J. Berneder, G. Rank, H. Antrekowitsch, S. Pogatscher and P. Uggowitzer:
Influence of chemical composition and process parameters on mechanical properties and formability of AIMgSi-sheets for automotive application. TMS Light Metals (2014), San Diego, USA, 227 – 232

Rumpold R. and J. Antrekowitsch:
Strategies to recover the valuable metal fraction from flue dust of the secondary copper production. Proc. of Shechtman International Symposium 2014, Cancun, Mexico, 2014

Rösler G., C. Pichler and J. Antrekowitsch:
Recycling of metallurgical wastes by a sustainable ironbath process with special focus on the carburization step. Proceedings of MultiScience – XXVIII microCAD International Multidisciplinary Scientific Conference. (2014)

Rösler G., C. Pichler and J. Antrekowitsch:
Recycling of metallurgical wastes by a sustainable ironbath process. Sustainable industrial processung summit/Shechman International Symposium. (2014), S. 181–192

Rösler G., C. Pichler, J. Antrekowitsch . :
“2sDR”: Process Development of a Sustainable Way to Recycle Steel Mill Dusts in the 21st Century. JOM 66 (2014) 9, S. 1721–1729

Schumacher P., M. Reich, V. Mohles, S. Pogatscher, B. Milkereit and P. Uggowitzer:
Correlation between supersaturation of solid solution and mechanical behaviour of two binary Al-Si-alloys. Materials Science Forum (2014), 508–514

Sobotka C., H. Antrekowitsch and H. Schnideritsch:
The influence of oxygen enriched burner systems on the scale formation of steel alloys during heating processes. AISTech 2014 Proceedings. (2014), S. 3115–3131

Sobotka C., H. Schnideritsch and H. Antrekowitsch:
Burnt to a crisp? – Why oxygen enhanced combustion doesn’t have to influence steel oxidation. Shechtman International Symposium Proceedings. (2014)

Sorger C., P. Stuhlpfarrer, S. Luidold and H. Antrekowitsch:
Auswirkungen der Pyrolyse von Elektronikschrotten auf die metallurgische Weiterverarbeitung. BHM Berg- und Hüttenmännische Monatshefte Band 159 (7), 306-307

Sorger C., P. Stuhlpfarrer, S. Luidold and H. Antrekowitsch:
Auswirkungen der Pyrolyse von Elektronikschrotten auf die metallurgische Weiterverarbeitung. Forum für Metallurgie und Werkststofftechnik, Onlinetagungsunterlagen (2014), Leoben, Österreich

Steinlechner S. and J. Antrekowitsch:
Behavior of Halogen Compounds in Secondary Zinc Oxide during Thermal Treatment. World of Metallurgy, Erzmetall 67 (2014), No. 4, 213-219

Steinlechner S.:
Environmentally friendly recycling of automotive catalysts in a closed hydrometallurgical loop. Hydrometallurgy 2014 – Volume II, p.489-498, Victoria, Canda

Stuhlpfarrer P., H. Schnideritsch, S. Luidold and H. Antrekowitsch:
Recovery Of Technology Metals From A WEEE-fraction. Proc. of Shechtman International Symposium 2014, Cancun, Mexico, 2014

Stuhlpfarrer P., S. Luidold and H. Antrekowitsch:
Recyclingkonzepte zur Rückgewinnung von Massen- und Technologiemetallen aus E-Schrotten der Kategorie 3. World of metallurgy – Erzmetall 67 (2014) No. 1, 28-37

Thurnheer P., R. Maaß, S. Pogatscher and J. Löffler:
Compositional dependence of shear-band dynamics in the Zr-Cu–Al bulk metallic glass system. Applied Physics Letters 104 (2014), 101910

Unger A., S. Steinlechner and J. Antrekowitsch:
A sustainable recycling process for simultaneous recovery of Zn, Pb and Ag from a dumped slag. Proceedings of Shechtman International Symposium Vol. 3. (2014), S. 179–190

Unger A., S. Steinlechner and J. Antrekowitsch:
Simultaneous recovery of valuables from a dumped slag. Proceedings of the 46th International October Conference on Mining and Metallurgy. (2014), S. 52–56

Unger A., S. Steinlechner and J. Antrekowitsch:
Upgrade of WOX with high energy solar radiation. Proc. MultiScience. XXVIII microCAD International Multidisciplinary Scientific Conference, Miskolc, Ungarn, 2014

Werinos M., H. Antrekowitsch, W. Fragner, P. Ebner, P. Uggowitzer and S. Pogatscher:
Influence of Sn-solubility on suppression of natural aging in an AA6061 aluminum alloy. Materials Science & Technology (MS&T) 2014, Pittsburgh, USA, 2014, 1283-1290

Agirre Arisketa I., T. Griessacher, G. Rösler and J. Antrekowitsch:
Production of charcoal as an alternative reducing agent from agricultural residues using a semi-continuous semi-pilot scale pyrolysis screw reactor. Fuel Processung Technology 106 (2013), 114-121

Angerer T., S. Luidold and H. Antrekowitsch:
Recycling potentials of the two refractory metals tantalum and niobium. Proc. of EMC 3 (2013), Weimar, Deutschland, 1069-1084

Antrekowitsch H. and B. Prillhofer:
Stranggießen von Aluminium. Handbuch Urformen, 341-347, 2013

Antrekowitsch H., H. Paulitsch and A. Pirker:
Einsatz minderwertiger Schrotte und Reststoffsituation beim Recycling von Aluminium. Recycling und Rohstoffe, Band 6, Recycling- und Rohstoffkonferenz, Berlin, Deutschland, 2013, S. 433-453

Antrekowitsch H., H. Paulitsch and A. Pirker:
Reststoffe aus der Aluminium-Sekundärindustrie. Proceedings der Berliner Schlackenkonferenz, Berlin, Deutschland, 2013, 615-638

Antrekowitsch H., S. Luidold and d. weitere:
Metal Recycling: Opportunities, Limits, Infrastructure. UNEP (2013) Metal Recycling: Opportunities, Limits, Infrastructure, A Report of the Working Group on the Global Metal Flows to the International Resource Panel

Antrekowitsch H.:
Recycling und Sekundärlegierungsentwicklung von Aluminium. Festschrift zur Emeritierung, 101-115, 2013

Antrekowitsch J. and G. Rösler:
Metallurgie mit nachwachsenden Rohstoffen. Recycling und Rohstoffe, Band 6, 2013, S.405-415

Antrekowitsch J.:
Recovery of Zinc and Iron from Steel Mill Dusts by the use of a TBRC. A possible Mini-mill Solution?. Proc of REWAS, San Antonio 2013

Antrekowitsch J.:
The Potential of Lead Recycling from Steel Mill Residues. Proc. of 3rd Secondary Lead Conference, Singapur 2013

Griessacher T. and J. Antrekowitsch:
Grüne Kohle. Recycling Magazin, Ausgabe 20, (2013), 28-31

Kaindl M., A. Poscher, S. Luidold and H. Antrekowitsch:
Investigation on different recycling concepts for rare earth containing magnets. Proc. of EMC 3 (2013), Weimar, Deutschland, 1151 – 1165

Luidold S., A. Poscher and H. Antrekowitsch:
Recovery of rare earths from residues of the glass industry by hydrochloric acid leaching. Proc. of EMC 3 (2013), Weimar, Deutschland, 1185 – 1190

Luidold S., A. Poscher and M. Kaindl:
Recycling von Seltenen Erden aus Sekundärrohstoffen. Recycling und Rohstoffe, Band 6, 2013, S. 533-544

Luidold S., A. Poscher, P. Stuhlpfarrer and H. Antrekowitsch:
Wirtschaftsstrategische Rohstoffe für die Hochtechnologie in Europa. BHM Berg- und Hüttenmännische Monatshefte (2013) Band 158 (3), 70-77

Luidold S., T. Angerer, H. Antrekowitsch, M. Kaindl, A. Poscher, P. Stuhlpfarrer and d. weitere:
Kritische Rohstoffe für die Hochtechnologieanwendung in Österreich. Bundesministerium für Verkehr, Innovation und Technologie, Abteilung für Energie- und Umwelttechnologien. Wien, Österreich (Berichte aus Energie- und Umweltforschung, 11/2013), Internet: http://www.nachhaltigwirtschaften.at/e2050/results.html/id6903

Luidold S.:
The situation regarding critical raw materials for the high technological sector in Austria . EUMICON – Contributions to a resilient raw materials policy. (2013), S. 605 – 627

Pichler C. and J. Antrekowitsch:
INNOVATIVE RECYCLINGSLAG-TREATMENT. WASTES, 11.-13. September, Braga, Portugal, 2013

Pichler C. and J. Antrekowitsch:
SLAGS FROM METAL RECYCLING PROCESSES AS INNOVATIVE SECONDARY RESOURCE. Proc. Of 9th Global Slag (2013), Dubai, Vereinigte Arabische Emirate, 56-62

Pichler C., A. Unger and J. Antrekowitsch:
Rückgewinnung von Wertmetallen aus Stahlwerksstäuben durch ein reduzierendes Metallbad. Aschen-Schlacken-Stäube, 23.-24. September, Berlin, Deutschland, 2013, 587-598

Pichler C., G. Schneeberger and J. Antrekowitsch:
Treatment and Application of slags from Recycling Process of Metal Industry Residues. Proc. of EMC 3 (2013), Weimar, Deutschland, 1203-1206

Pichler C., G. Schneeberger and J. Antrekowitsch:
Utilization of Residues from the Iron and Steel Industry with main Focus on Filter Dusts. Proc. of XXVII. microCad International Scientific Conference (2013), Miskolc

Pirker A., H. Antrekowitsch, M. Kettner, W. Fragner and H. Suppan:
Recycling of Aluminium Scrap with Organic Load. Proc. of EMC 3 (2013), Weimar, Deutschland, 1207-1215

Pogatscher S., H. Antrekowitsch and P. Uggowitzer:
Influence of starting temperature on differential scanning calorimetry measurements of an Al-Mg-Si alloy. Materials Letters (2013), S 163-165

Pogatscher S., H. Antrekowitsch, H. Leitner, A. Sologubenko and P. Uggowitzer:
Influence of the thermal route on the peak-aged microstructures in an Al-Mg-Si aluminum alloy. Scripta Materialia 68 (2013), 158 – 161

Poscher, A., S. Luidold and H. Antrekowitsch:
Processing of rare earth containing residues. REMat, Wroclaw, Polen (2013)

Poscher A., S. Luidold and H. Antrekowitsch:
Extraction of Cerium and Lanthanum from Spent Glass Polishing Agent. Proceedings of Materials Science & Technology (2013), Montréal, Kanada, 543-552

Poscher A., S. Luidold and H. Antrekowitsch:
Rückgewinnung von Antimon aus einem metallischen Reststoff. Heft 133 der Schriftenreihe der GDMB, 46. Metallurgisches Seminar der GDMB, Herstellung und Recycling von Technologiemetallen (2013), Joachimsthal, Deutschland, 113-127

Poscher A., S. Luidold, M. Kaindl and H. Antrekowitsch:
Recycling of Rare Earths from Spent Phosphors. Proc. of EMC 3 (2013), Weimar, Deutschland, 1217 – 1222

Rumpold R. and J. Antrekowitsch:
Removal of Halogens in Heavy Metal containing Flue Dust from the Secondary Copper Production. Proc. of EMC 3 (2013), Weimar, Deutschland, 933-938

Rumpold R. and J. Antrekowitsch:
Zinc in the copper secondary production and potential recycling technologies. Proc. of Copper 2013, Santiago, Chile, S. 265 – 280

Rösler G. and J. Antrekowitsch:
Special designed charcoal for an environmental friendly heavy metal recycling. Proc. of the Annual World Conference of Carbon (2013), Rio de Janeiro, Brasilien

Rösler G. and J. Antrekowitsch:
Sustainable Carbonization of Iron Bath by Utilization of Renewable Bio-Char. Proc. of EMC 1 (2013), Weimar, Deutschland, 409-414

Schlögl C. and H. Antrekowitsch:
Influence of impurities in secondary aluminium on machinability and anodising behaviour. Proc. of EMC 3 (2013), Weimar, Deutschland

Schlögl C., P. Stuhlpfarrer, S. Luidold and H. Antrekowitsch:
Datenschrott. Recycling Magazin, Ausgabe 24, (2013), 28-31

Schlögl C., S. Koch and H. Antrekowitsch:
Optimierung der Anodisierbarkeit bei Aluminiumlegierungen. BHM (2013) Vol. 158 (3): 97-103

Schneeberger G. and J. Antrekowitsch:
Investigations in the Behaviour of Quasi-Ternary Slag System during Recycling of Residues from Steel Industry. Proc. of XXVII. microCad International Scientific Conference (2013), Miskolc

Sobotka C. and H. Antrekowitsch:
Investigation of the Scale Formation of a Chromium and Molybdenum containing Steel Alloy in an Oxipyr®-oxyfuel combusted Reheat Furnace. Proceedings of European Metallurgical Conference EMC 2013, Volume 1, S:415-426

Steinlechner S. and J. Antrekowitsch:
PGM recycling from catalysts in a closed hydrometallurgical loop with an optional cerium recovery. REWAS TMS 2013, San Antonio, USA, 2013

Steinlechner S.:
A hydrometallurgical concept for PGM recycling from catalysts – From a mass balance to economic considerations, Precious Metals. The Precious Metals Development Network (PMDN), Cape Town, South Africa, 2013

Stuhlpfarrer P., S. Luidold and H. Antrekowitsch:
Erhöhung der Verwertungsquoten beim Recycling von Elektronikschrott. BHM Berg- und Hüttenmännische Monatshefte (2013) Band 158 (3), 85-90

Stuhlpfarrer P., S. Luidold and H. Antrekowitsch:
Recycling Potential of Special Metals like Indium, Gallium and Germanium. Proc. of EMC 3 (2013), Weimar, Deutschland, 1249 – 1262

Stuhlpfarrer P., S. Luidold and H. Antrekowitsch:
Recyclingkonzepte zur Rückgewinnung von Massen- und Technologiemetallen aus E-Schrotten der Kategorie 3. Heft 133 der Schriftenreihe der GDMB, 46. Metallurgisches Seminar der GDMB, Herstellung und Recycling von Technologiemetallen (2013), Joachimsthal, Deutschland, 19-36

Tzouganatos N., T. Matter, C. Wieckert, J. Antrekowitsch, M. Gamroth and A. Steinfeld:
Thermal Recycling of Waelz Oxide Using Concentrated Solar Energy. JOM, Vol. 65, No. 12, 2013, 1733-1743

Unger A. and J. Antrekowitsch:
Reforming of a Zinc Containing Gas Mixture with Steam for the Generation of ZnO and H2. Proc. of EMC 2 (2013), Weimar, Deutschland, 587-593

Unger A., S. Steinlechner and J. Antrekowitsch:
Recovery of valuable metals like Zn, Pb and Ag from a hazardous residue generated in the pyrometallurgical lead-, zinc- production. WASTES, 11.-13. September, Braga, Portugal, 2013

Unger A., S. Steinlechner and J. Antrekowitsch:
Zinc oxide quality upgrade by a clinkering process obtained from recycling of secondary resources. Recycling of Non-Ferrous metals, Krakau, Polen, 2013

Agirre Arisketa I., T. Griessacher, A. Adrados, J. Requies, J. Cambra and J. Antrekowitsch:
Catalytic upgrading of biomass pyrolysis vapors to bio-syngas, a possible reducing agent for metallurgical processes. Proc. of 4th International Conference on Engineering for Waste and Biomass Valorisation (2012), Porto, Portugal

Angerer T., S. Luidold, H. Schnideritsch and H. Antrekowitsch:
RFID-Reststoff-Anfall und Recyclingpotenziale der Metallanteile. BHM, 157. Jg. (2012), Heft 1, 14 – 19

Antrekowitsch H.:
Zukünftige Herausforderungen beim Recycling von Aluminium. Proceeding der 7. Ranshofener Leichtmetalltage, Energieeeffiziente Mobilität, (2012), Gmunden, Österreich, 224 – 237

Antrekowitsch J.:
Process Development in the Recycling of metal containing industrial Wastes. Proc. of PSU-IC 2012, 10th International Conference on Mining, Materials and Petroleum Engineering / 6th International Conference on Earth Resources Technology (2012), Songkhla, Thailand

Griessacher T. and G. Rösler:
Nutzungsoptionen von Biomasse im Metallrecycling. Proc. of 45. Metallurgisches Seminar der GDMB, Energieeffizienz in der Metallurgie (2012), Ulm, Deutschland, 87 – 95

Griessacher T. and J. Antrekowitsch:
Utilization of Biomass at the Recycling of Heavy Metal Containing Wastes. Waste and Biomass Valorization, 2012, Volume 3, Number 3, 369 – 374

Griessacher T., J. Antrekowitsch and S. Steinlechner:
Charcoal from agricultural residues as alternative reducing agent in metal recycling. Biomass and Bioenergy 39 (2012), 139 – 146

Hoy C. and S. Luidold:
Das Dreistoffsystem Al2O3-CaO-SiO2 – ein Vergleich von berechneten und gemessenen Daten. BHM, 157. Jg. (2012), Heft 1, 7 – 13

Kaindl M., S. Luidold and A. Poscher:
Recycling von Seltenen Erden aus Nickel-Metallhydrid-Akkumulatoren unter besonderer Berücksichtigung von Säurerückgewinnung. BHM, 157. Jg. (2012), Heft 1, 20 – 26

Luidold S. and H. Antrekowitsch:
Recovery of rare earth metals from waste material by leaching in non-oxidizing acid and by precipitating using sulphates. EP 2444507

Luidold S. and H. Schnideritsch:
Möglichkeiten des Recyclings von LEDs im Vergleich zu anderen Beleuchtungskörpern. Proc. of 45. Metallurgisches Seminar der GDMB, Energieeffizienz in der Metallurgie (2012), Ulm, Deutschland, 41 – 54

Luidold S. and H. Schnideritsch:
Möglichkeiten des Recyclings von LEDs im Vergleich zu anderen Beleuchtungskörpern. World of Metallurgy – Erzmetall, 65 (2012) 354 – 360

Luidold S., A. Poscher and H. Antrekowitsch:
Concepts for the extraction of rare earths from spent phosphors. Proceedings of the 51st Annual Conference of Metallurgists of CIM (COM 2012) in: Rare earths 2012 (2012), S. 435 – 446, Niagara, ON, Kanada ; 2012

Luidold S., T. Angerer and H. Antrekowitsch:
Recovery of tungsten from waste material by ammonium leaching. EP245031203.11.10

Luidold S.:
Gewinnung von Technologiemetallen aus alternativen Rohstoffquellen. BHM, 157. Jg. (2012), Heft 1, 32 – 37

Pogatscher S., H. Antrekowitsch and P. Uggowitzer:
Interdependent Effect of Chemical Composition and Thermal History on Artificial Aging of AA6061. Acta materialia 60 (2012) , S. 5545 – 5554

Pogatscher S., H. Antrekowitsch, H. Leitner, D. Pöschmann, Z. Zhang and P. Uggowitzer:
Influence of interrupted quenching on artificial aging of Al–Mg–Si alloys. Acta Materialia 60 (2012), 4496 – 4505

Pogatscher S., H. Antrekowitsch, T. Ebner and P. Uggowitzer:
The Role of Co-Clusters in the Artificial Aging of AA6061 and AA6060. Proc. Light Metals TMS (2012), Orlando, USA, 415 – 420

Poscher A., S. Luidold and H. Antrekowitsch:
Konzepte zur Gewinnung von Seltenen Erden aus Leuchtstoffen. Tagungsband zur 11. DepoTech-Konferenz (2012), Leoben, Österreich, 373 – 378

Rumpold R. and J. Antrekowitsch:
Recycling of PGMs from spent automotive-catalysts: State of the Art and future perspectives. Proc. of XXVI. microCad International Scientific Conference (2012), Miskolc, Hungary

Rumpold R. and J. Antrekowitsch:
Recycling of platinum group metals from automotive catalysts by an acidic leaching process. Platinum Conference “A Catalyst for Change” (2012), Sun City, South Africa, 695 – 713

Rumpold R. and J. Antrekowitsch:
Simultaneous Recovery Of Valuable Metals From Automotive Catalysts Through Hydrometallurgical Processing. Proc. of 51th Annual Conference of Metallurgists (2012), Niagara Falls, Canada, 197 – 210

Rösler G., T. Griessacher and J. Antrekowitsch:
The influence of charcoal properties on its applicability in metallurgical operations. Proc. of the 4th International Symposium on Energy from Biomass and Waste (2012), Venedig, Italien

Rösler G., T. Griessacher, I. Agirre Arisketa and J. Antrekowitsch:
Charcoal production for metallurgical processes with special focus on structural properties. Proc. of 4th International Conference on Engineering for Waste and Biomass Valorisation (2012), Porto, Portugal

Schneeberger G. and J. Antrekowitsch:
Implementation of a previous purification step in course of the recycling of filter dusts from the iron and steel industry. Proc. of XXVI. microCad International Scientific Conference (2012), Miskolc

Schneeberger G., J. Antrekowitsch and C. Pichler:
Development of a New Recycling Process for High Zinc Containing Steel Mill Dusts including a Detailed Characterization of an Electric Arc Furnace Dust. BHM, 157. Jg. (2012), Heft 1, 1 – 6

Schneeberger G., J. Antrekowitsch and C. Pichler:
Die Verwertung von Hüttenreststoffen aus der Eisen- und Stahlindustrie mit Schwerpunkt Filterstäube. Das XII. Internationale Symposium Entschwefelung von Roheisen und Stahl, Almamet GmbH, 19.-22. September, Wien, Österreich, 2012, 13 – 24

Schnideritsch H., S. Luidold, T. Angerer and H. Antrekowitsch:
Problematik der Aufbereitung von RFIDs. Recycling und Rohstoffe, Band 5 (2012), 625 – 636

Sobotka C.:
Characterisation of the Scale Formation using Thermogravimetric Analyses. Proceedings of HITEMP 2012, München, Deutschland, 532-536

Stadler F., H. Antrekowitsch, W. Fragner, H. Kaufmann and P. Uggowitzer:
Effect of main alloying elements on strength of Al–Si foundry alloys at elevated temperatures. International Journal of Cast Metals Research,2012, Vol. 25, No. 4, 215 – 224

Stadler F., H. Antrekowitsch, W. Fragner, H. Kaufmann and P. Uggowitzer:
Mechanische Eigenschaften von AlSiCu3(Fe) und AlSi12CuNiMgmod bei erhöhten Temperaturen. Giesserei 03 (2012), 38 – 46

Stadler F., H. Antrekowitsch, W. Fragner, H. Kaufmann and P. Uggowitzer:
The effect of Nickel on the thermal conductivity of Al-Si foundry alloys. 13th International Conference on Aluminum Alloys (ICAA13) , TMS (The Minerals, Metals & Materials Society), 2012, 137 – 142

Stadler F., H. Antrekowitsch, W. Fragner, H. Kaufmann and P. Uggowitzer:
The influence of solution treatment on the high-temperature strength of Al-Si foundry alloys with Ni. Proc. Light Metals TMS (2012), Orlando, USA, 431 – 434

Stadler F., H. Antrekowitsch, W. Fragner, H. Kaufmann, E. Pinatel and P. Uggowitzer:
The effect of main alloying elements on the physical properties of Al-Si foundry alloys. Materials Science & Engineering A, (2012)

Steinlechner S., J. Antrekowitsch and G. Schneeberger:
Influence of temperature and treatment time on the halide removal yield during clinkering. Proc. of XXVI. microCad International Scientific Conference (2012), Miskolc, Ungarn

Steinlechner S.:
Optimization possibilities in zinc recycling from residues. Proc. of PSU-IC 2012 (The 10th International Conference on Mining, Materials and Petroleum Engineering / The 6th International Conference on Earth Resources Technology) (2012), Songkhla, Thailand

Steinlechner S.:
The potential of secondary resources for covering future zinc and lead demands. EUMicon 2012, Leoben, Austria, 2012

Visser A., S. Koch and H. Antrekowitsch:
Einsatz von Diamantschneidplatten bei der CNC-Bearbeitung von Al- und Cu-Legierungen. BHM 157 (2012) 1, 461 – 465

Angerer T., S. Luidold and H. Antrekowitsch:
Development of a new process for tungsten soft scrap recycling. Proc. of EMC 2 (2011), Düsseldorf, Deutschland, 549 – 563

Angerer T., S. Luidold and H. Antrekowitsch:
Optimized roasting for an improved soft scrap recycling. Proc. of the International Conference on Tungsten, Refractory & Hard Materials VIII, Vol. 2 (2011), San Francisco, USA, 58 – 68

Angerer T., S. Luidold and H. Antrekowitsch:
Technologien zum Recycling von Hartmetallschrotten (Teil 1). World of metallurgy – Erzmetall 64 (2011) No. 1, 5 – 14

Angerer T., S. Luidold and H. Antrekowitsch:
Technologien zum Recycling von Hartmetallschrotten (Teil 2). World of metallurgy – Erzmetall 64 (2011) No. 2, 62 – 70

Angerer T., S. Luidold and H. Antrekowitsch:
Technologien zum Recycling von Hartmetallschrotten (Teil 3). World of metallurgy – Erzmetall 64 (2011) No. 6, 328 – 336

Antrekowitsch H., S. Koch, H. Paulitsch, S. Pogatscher, P. Pucher, F. Stadler and C. Wagner:
Recycling und Werkstoffentwicklung von Aluminium. Berg- und hüttenmännische Monatshefte: BHM 156 (2011) 7, 287 – 294

Antrekowitsch J. and S. Steinlechner:
Melting Behavior Of Complex Zinc Containing Residues. Proc. of International Symposium on Metals and Materials Processing in a Clean Environment (Fray Symposium) (2011), Cancun, Mexiko

Antrekowitsch J. and S. Steinlechner:
Optimization in the Recycling of Zinc Containing Industrial Residues. Proc. of Earth2011 – The 11th International Symposium on East Asia Resource Recycling Technology (2011), Kaohsiung, Taiwan, 608 – 611

Antrekowitsch J. and S. Steinlechner:
The Recycling of Heavy-metal Containing Wastes: Mass Balances and Economical Estimations. JOM 63 (2011) 1, 68 – 72

Antrekowitsch J., T. Griessacher and S. Steinlechner:
Optimization in Recycling of Zinc Containing Residues. Proc. of 1st International Conference on WASTES: Solutions, Treatments and Opportunities (2011), Guimaraes, Portugal, 258 – 263

Antrekowitsch J.:
New Perspectives in the Recycling of Dusts from Integrated Steel Mills. Proc. of EMC 4 (2011), Düsseldorf, Deutschland, 1305 – 1314

Brisberger R. and H. Antrekowitsch:
Erzeugung längsnahtgeschweißter und feuerverzinkter Rohre bei Wuppermann in Judenburg. Proc. of XXX. Verformungskundliches Kolloquium (2011), Planneralm, Österreich, 119 – 123

Brisberger R., H. Antrekowitsch and H. Vasold:
Zn-Al-Mg alloy coatings in the production process of Wuppermann. Proc. of 3rd Seminar on Networking between Zinc and Steel (2011), Leoben, Österreich, 111 – 128

Brisberger R., H. Antrekowitsch, H. Vasold, M. Wießner and B. Sartory:
Zn-Al-Mg alloy coatings in the production process of Wuppermann. Proc. of EMC 3 (2011), Düsseldorf, Deutschland, 775 – 791

Griessacher T. and J. Antrekowitsch:
Alternative Reducing Agents in the Recycling of Heavy Metal-Containing Residues. Proc. of EMC 4 (2011), Düsseldorf, Deutschland, 1349 – 1361

Griessacher T. and J. Antrekowitsch:
Biomasse – Ein Ausweg aus der CO2-Problematik im Metallrecycling!?. BHM, 156. Jg. (2011), Heft 1, 14 – 21

Griessacher T. and J. Antrekowitsch:
Hydrogen rich and carbon neutral gas as reducing agent for heavy metal containing residues. Proc. Energy Technology TMS (2011), San Diego, USA, 197 – 208

Griessacher T. and J. Antrekowitsch:
Utilization of Biomass at the Recycling of Heavy Metal Containing Wastes. Proc. of 1st International Conference on WASTES: Solutions, Treatments and Opportunities (2011), Guimaraes, Portugal, 105 – 110

Griessacher T.:
Einsatzmöglichkeiten von Biomasse in metallurgischen Prozessen. Proc. of 20. Symposium Bioenergie – Festbrennstoffe (2011), Regensburg, Deutschland, 38 – 44

Hoy C., S. Luidold and H. Antrekowitsch:
Recycling of Secondary Materials for the Production of Ferroalloys. Proc. of EMC 4 (2011), Düsseldorf, Deutschland, 1375 – 1390

Kaindl M., S. Luidold and H. Antrekowitsch:
Extraction of Rare Earths from Used Nickel Metal Hydride Batteries. Proc. of EMC 4 (2011), Düsseldorf, Deutschland, 1401 – 1415

Koch S. and B. Eberhard:
Bewertung der Haftung von Folienkaschierungen auf verzinktem Stahlband mittels modellgestützter Versuchsplanung. Internationaler Studententag der Metallurgie (2011), Leoben, 295 – 300

Koch S. and H. Antrekowitsch:
Alloying behaviour of Cu, Mg and Mn in lead-free Al-Cu based alloys intended for free machining. BHM, 156. Jg. (2011), Heft 1, 22 – 27

Koch S. and H. Antrekowitsch:
Auswirkungen von Elementgehaltsvariationen in Al-Knetlegierungen hinsichtlich Aushärtbarkeit, Eloxierbarkeit und Zerspanbarkeit am Beispiel von neuen bleifreien Al-Cu-Automatenlegierungen. BHM, 156. Jg. (2011), Heft 11, 441 – 447

Koch S. and H. Antrekowitsch:
Effect of Ti or Zr additions on material characteristics of new lead-free Al-Cu-Mg-Sn alloys for machining purposes . Proc. of European Metallurgical Conference EMC (2011), Düsseldorf, Deutschland, 1161-1170

Koch S. and H. Antrekowitsch:
Investigations of lead-free aluminium alloys for machining. World of metallurgy – Erzmetall 64 (2011) No. 1, 26 – 30

Koch S. and P. Knoll:
Removal of Sb, Bi and As in the Copper Production Process. Internationaler Studententag der Metallurgie (2011), Leoben, 220 – 228

Luidold S. and H. Antrekowitsch:
Lithium – Natural Resources, Application, and Recycling. Light Metal Age 69 (2011) No. 1, 50 – 55

Luidold S. and H. Antrekowitsch:
Red Mud – Hazardous Waste or Valuable Raw Material?. Proc. of EMC 3 (2011), Düsseldorf, Deutschland, 853 – 864

Luidold S. and H. Antrekowitsch:
Vörösiszap – veszélyes hulladék, vagy értékes nyersanyag?. Kohászat 144 (2011), 34 – 39

Luidold S., H. Schnideritsch and H. Antrekowitsch:
Schmelzmetallurgische Beurteilung von nichteisenmetallhältigen Schlacken. BHM, 156. Jg. (2011), Heft 1, 1 – 5

Luidold S.:
Niobium powders: Uses and process developments for their production. Niobium: Properties, Production and Applications. Nova Science Publishers, New York (2011), 143 – 165

Paschen P.:
Eisen – Ares – Mars: Metalle, Götter und Gestirne. World of metallurgy – Erzmetall 64 (2011) No. 6, 348 – 353

Paulitsch H., H. Antrekowitsch and A. Schmid:
Vergleich des Abbrandverhaltens beim Rezyklieren von Aluminiumspänen und -briketts. BHM, 156. Jg. (2011), Heft 1, 6 – 13

Pichler C., C. Stock, P. Pucher and H. Antrekowitsch:
Optimierung eines Al-Drehspaltkeiles. Proc. of 18th International Student’s Day of Metallurgy (2011), Leoben, Österreich, 248 – 254

Pirker A., H. Paulitsch, S. Luidold, H. Antrekowitsch and T. Prietl:
Erzeugung von synthetischer Titanschlacke aus Ilmenit inklusive Marktstudie. Proc. of 18th International Student’s Day of Metallurgy (2011), Leoben, Österreich, 255 – 264

Pogatscher S., H. Antrekowitsch, H. Leitner, T. Ebner and P. Uggowitzer:
Mechanisms controlling the artificial aging of Al-Mg-Si Alloys. Acta Materialia 59 (2011), 3352 – 3363

Pogatscher S., S. Koch and H. Antrekowitsch:
Development of a coating process for copper strips with appropriate lead-free solders. Proc. of EMC 1 (2011), Düsseldorf, Deutschland, 123 – 136

Poscher A., S. Luidold and H. Antrekowitsch:
Aufbereitung von Nickelmetallhydridakkus zur Wiedergewinnung Seltener Erden. Proc. of 18th International Student’s Day of Metallurgy (2011), Leoben, Österreich, 419 – 426

Schneeberger G. and J. Antrekowitsch:
Characterization of Dusts from BOF-Steelmaking and Foundry Industry. Proc. of XXV. microCad International Scientific Conference (2011), Miskolc, 47 – 54

Schneeberger G. and J. Antrekowitsch:
Characterization of Typical Dusts from Steel and Foundry Industry. Proc. of 3rd Seminar on Networking between Zinc and Steel (2011), Leoben, Österreich, 21 – 29

Schneeberger G. and J. Antrekowitsch:
New developments in the recycling of zinc containing dusts from steel and foundry industry. Proc. of EMC 4 (2011), Düsseldorf, Deutschland, 1493 – 1506

Schneeberger G., S. Steinlechner and J. Antrekowitsch:
Characterization and Reduction of Filter Dusts in the Liquid Phase. Proc. of 50th Annual Conference of Metallurgists (COM 2011), Montreal, Kanada, 387 – 397

Schnideritsch H., H. Antrekowitsch, S. Luidold and C. Wagner:
Investigation of the Quasi-Ternary-System Fe2O3-Cr2O3-ZnO and its Influencing Parameters. Proc. of EMC 4 (2011), Düsseldorf, Deutschland, 1249 – 1262

Stadler F., H. Antrekowitsch, W. Fragner, H. Kaufmann and P. Uggowitzer:
Der Einfluss von Nickel auf die Warmfestigkeit von AlSi-Gusslegierungen. Giesserei 08 (2011), 22 – 27

Stadler F., H. Antrekowitsch, W. Fragner, H. Kaufmann and P. Uggowitzer:
The effect of Ni on the high-temperature strength of Al-Si cast alloys. Materials Science Forum 690 (2011), 274 – 277

Steinlechner S. and J. Antrekowitsch:
Concepts for the SImultanous Recovery of Valuable Metals from Zinc Bearing Residues. Proc. of Earth2011 – The 11th International Symposium on East Asia Resource Recycling Technology (2011), Kaohsiung, Taiwan, 733 – 736

Steinlechner S. and J. Antrekowitsch:
Hydro- and Pyrometallurgical Options for the Upgrading of Low Grade Secondary Zinc Oxides. Proc. of EMC 2 (2011), Düsseldorf, Deutschland, 533 – 546

Steinlechner S. and J. Antrekowitsch:
Investigations In The Improvement Of Recycling Of Electric Arc Furnace Dusts. Proc. of International Symposium on Metals and Materials Processing in a Clean Environment (Fray Symposium) (2011), Cancun, Mexiko

Steinlechner S. and J. Antrekowitsch:
Investigations in Clinkering for the Removal of Halogens from Secondary Zinc Oxides. Proc. of XXV. microCad International Scientific Conference (2011), Miskolc, 55 – 62

Steinlechner S. and J. Antrekowitsch:
Options for Halogen Removal from Secondary Zinc Oxides. Proc. of 3rd Seminar on Networking between Zinc and Steel (2011), Leoben, Österreich, 47 – 56

Steinlechner S., G. Schneeberger and J. Antrekowitsch:
Possibilities for the Improvement of Secondary Zinc Oxide Quality. Proc. of 50th Annual Conference of Metallurgists (COM 2011), Montreal, Kanada, 247 – 257

Antrekowitsch J. and D. Offenthaler:
Die Halogenproblematik in der Aufarbeitung zinkhältiger Reststoffe. BHM, 155. Jg. (2010), Heft 1, 31 – 39

Antrekowitsch J. and S. Steinlechner:
Bis zum letzten Rest – NE-Metalle Wissenschaftler der Montanuniversität Leoben forschen an einem effizienten Recycling von Reststoffen aus der Metallurgie – dem “Zero-Waste-Verfahren”. Recycling Magazine, Ausgabe 09/10 (2010), 26 – 29

Antrekowitsch J. and S. Steinlechner:
Characterization of Zinc Containing Residues from Copper and Zinc Industry. Proc. of XXIV. microCad International Scientific Conference (2010), Miskolc, S. 1 – 10

Antrekowitsch J. and S. Steinlechner:
Characterization of Zinc Containing Residues from Nonferrous Industry. Proc. of 49th Annual Conference of Metallurgists (COM 2010), Vancouver, Kanada, 153 – 163

Antrekowitsch J. and S. Steinlechner:
Evaluation and Recycling Potential of Different Zinc Containing Residues from Metallurgical Industry. Proc. of 49th Annual Conference of Metallurgists (COM 2010), Vancouver, Kanada, 851 – 859

Antrekowitsch J. and S. Steinlechner:
Potential of hydrogen as alternative reducing agent in metallurgical processes. Proc. of 3rd International Conference on Engineering for Waste and Biomass Valorisation (2010), Peking, China

Griessacher T. and J. Antrekowitsch:
Charcoal from Biomass – A Sustainable Reductant. Proc. of 3rd International Conference on Engineering for Waste and Biomass Valorisation (2010), Peking, China

Griessacher T., J. Antrekowitsch and D. Offenthaler:
Bio-char respectively Bio-coke from Agricultural Wastes for Metallurgical Uses. Proc. of 18th European Biomass Conference and Exhibition From Research to Industry and Markets (2010), Lyon, Frankreich, 1475 – 1480

Koch S. and H. Antrekowitsch:
Effects of varied Sn and Cu content in lead-free Al-Cu based alloys intended for free machining. Proc. of 49th Annual Conference of Metallurgists (COM 2010), Vancouver, Kanada, 289 – 298

Konetschnik S., H. Paulitsch, J. Pesl and H. Antrekowitsch:
Recovery of Valuable Metals from Converter Slags by Reduction with Iron. Proc. of Copper (2010), Hamburg, Deutschland, 863 – 877

Lorber K. and H. Antrekowitsch:
Treatment and Disposal of Residues from Aluminium Dross Recovery. Proceedings of CRETE 2010. 2nd International Converence on Hazardous and Industrial Waste Management (2010), Kreta, Griechenland

Luidold S. and H. Antrekowitsch:
Lithium – Rohstoffquellen, Anwendung und Recycling. Heft 121 der Schriftenreihe der GDMB Gesellschaft für Bergbau, Metallurgie, Rohstoff- und Umwelttechnik des 44. Metallurgischen Seminars, Sondermetalle und Edelmetalle (2010), Hanau, Deutschland, 71 – 86

Luidold S. and H. Antrekowitsch:
Lithium – Rohstoffquellen, Anwendung und Recycling. World of metallurgy – Erzmetall 63 (2010) No. 2, 68 – 76

Luidold S. and H. Antrekowitsch:
Rückgewinnung von Seltenen Erden aus Nickelmetallhydrid-Akkumulatoren. Proc. of DepoTech (2010), Leoben, Österreich, 301 – 306

Luidold S.:
Prozessentwicklung zur kontinuierlichen Herstellung von Pulvern für Elektrolytkondensatoren. BHM, 155. Jg. (2010), Heft 1, 26 – 30

Luidold S.:
Urban Mining von Seltenen Erden. Recycling Magazine, Sonderheft Juli (2010), 30 – 33

Paschen P.:
Blei – Kronos – Saturn: Metalle, Götter und Gestirne. World of Metallurgy – Erzmetall 62 (2010) No. 6, 5 – 10

Paschen P.:
Schwarzkopf, Paul – Erfinder, Unternehmer.. Neue Deutsche Biographie, 24. Band (2010), 30 – 31, Verlag Duncker & Humblot, Berlin

Paulitsch H., S. Konetschnik and J. Pitayataratorn:
Metallurgical Treatment of Titanium Containing Mining Residues. World of metallurgy – Erzmetall 63 (2010) No. 4, 197 – 204

Potesser M., B. Holleis, M. Demuth, D. Spoljaric and J. Zauner:
Customized Burner Concepts for the Copper Industry. Pyrometallurgy II (2010), 1051 – 1060

Pucher P., H. Antrekowitsch, H. Böttcher, H. Kaufmann and P. Uggowitzer:
Computerunterstützte Vorhersage Mechanischer Kennwerte von A226. Giesserei 11 (2010), 42 – 49

Pucher P., H. Antrekowitsch, H. Böttcher, H. Kaufmann and P. Uggowitzer:
Influence of compositional variations on microstructural evolution, mechanical properties and fluidity of the secondary foundry alloy AlSi9Cu3. International Journal of Cast Metals Research 23 (2010), 375 – 383

Ressel R., S. Luidold and H. Antrekowitsch:
Die Ferromolybdänherstellung unter besonderer Berücksichtigung der Schlackenmetallurgie. Heft 121 der Schriftenreihe der GDMB Gesellschaft für Bergbau, Metallurgie, Rohstoff- und Umwelttechnik des 44. Metallurgischen Seminars, Sondermetalle und Edelmetalle (2010), Hanau, Deutschland, 87 – 102

Steinlechner S. and J. Antrekowitsch:
Economical potential of the use of biomass in metallurgical recycling processes. Proc. of 3rd International Conference on Engineering for Waste and Biomass Valorisation (2010), Peking, China

Steinlechner S. and J. Antrekowitsch:
Investigation in Simultaneous Recovery of Valuable Metals from Heavy-Metal Containing Residues. Proc. of XXIV. microCad International Scientific Conference (2010), Miskolc, S. 59 – 69

Steinlechner S. and J. Antrekowitsch:
Simultaneous Recovery of Various Metals from Zinc Containing Residues on a Reducing Metal Bath. Proc. of 49th Annual Conference of Metallurgists (COM 2010), Vancouver, Kanada, 889 – 897

Wagner C., H. Antrekowitsch and H. Schnideritsch:
Comparing and Evaluating Smelted and Mechanically Produced Deoxidation Aluminium with Regard to Minimising the Oxygen Content of Molten Steel. World of Metallurgy – Erzmetall 63 (2010), No. 1, 6 – 12

Wagner C., H. Antrekowitsch and H. Schnideritsch:
Reaktionsverhalten von Aluminium bei der Desoxidation in Abhängigkeit von Form und Herstellungsverfahren. Stahl und Eisen 130, (2010) Heft 1, 39 – 45

Wagner C., S. Luidold, H. Antrekowitsch and K. Rimmer:
Application of New Gas-Atomization System for Alloys and Chalcogenides. Proc. of the 2010 International Conference on Powder Metallurgy & Particulate Materials (2010), Ft. Lauderdale, USA, Part 2, 19 – 33

Antrekowitsch H., H. Schnideritsch and S. Konetschnik:
Metallurgisches Recycling von metallhaltigen Reststoffen und Schrotten – eine verfahrenstechnische und rohstoffpolitische Herausforderung. Recycling und Rohstoffe, Band 2 (2009), 309 – 325

Antrekowitsch H., S. Luidold and J. Antrekowitsch:
Experimental Investigations on V-containing Steelwork Slags with a low V2O5 content. BHM, 154. Jg. (2009), Heft 7, 328 – 333

Antrekowitsch J. and T. Griessacher:
The current status of recycling of electric arc furnace dusts and perspectives for the future. Proc. of XXIII. microCAD (2009), Miskolc, Ungarn, 33 – 43

Antrekowitsch J., S. Steinlechner and H. Schnideritsch:
Charakterisierung von komplexen Reststoffen der Kupfer- und Zinkmetallurgie. BHM, 154. Jg. (2009), Heft 7, 320 – 327

Antrekowitsch J., T. Griessacher and D. Offenthaler:
Forschung im Bereich der Vernetzung von Zink und Stahl an der NE-Metallurgie der Montanuniversität Leoben. Proc. von 2. Seminar – Vernetzung von Zink und Stahl (2009), Leoben, Österreich, 9 – 19

Antrekowitsch J.: Complex Heavy Metal Containing Wastes:
Between Landfilling and Recycling. Proc. of EMC 1 (2009), Innsbruck, Österreich, 3 – 13

Griessacher T. and J. Antrekowitsch:
Biomass as Reducing Agent in the Metallurgy. Proc. of EMC 3 (2009), Innsbruck, Österreich, 1019 – 1029

Hackl A., H. Antrekowitsch, H. Zunko and R. Brisberger:
Development of Zn-Al-Mg-alloys for Continuous Hot Dip Galvanising of Hot Rolled Steel Strip. Proc. of EMC 3 (2009), Innsbruck, Österreich, 1029 – 1037

Hackl A., H. Zunko, H. Antrekowitsch and R. Brisberger:
Entwicklung von Zn-Al-Mg-Legierungen zum Verzinken vom Warmband mittels CVGL®-Technologie. BHM, 154. Jg. (2009), Heft 9, 398 – 402

Hackl A., R. Brisberger and H. Zunko:
Die Effektivität des Zulegierens von Aluminium und Magnesium in Zinkschmelzen beim kontinuierlichen Feuerverzinken von Warmband unter Einsatz des CVGL®-Verfahrens. Proc. von 2. Seminar – Vernetzung von Zink und Stahl (2009), Leoben, Österreich, 97 – 105

Hacksteiner M., H. Antrekowitsch, M. Köffler, G. Wagner and H. Okorn-Schmidt:
Nucleation of Copper on Tantalum in a Liquid Ammonia based Electrolyte. Proc. of EMC 1 (2009), Innsbruck, Österreich, 327 – 345

Konetschnik S., H. Antrekowitsch and G. Schneeberger:
Recovery of Copper and Precious Metals from Shredder Residues. Proc. of EMC 2 (2009), Innsbruck, Österreich, 661 – 673

Luidold S. and H. Antrekowitsch:
Wasserstoff – ein Reduktionsmittel mit Zukunft. Teil 3: Neue Entwicklungen bei der Wasserstoffreduktion. BHM, 154. Jg. (2009), Heft 7, 309 – 313

Luidold S. and R. Ressel:
Tantalum and Niobium Powders for Electrolytic Capacitors. Proc. of EMC 4 (2009), Innsbruck, Österreich, 1437 – 1451

Luidold S., B. Matl, C. Wagner and K. Rimmer:
Two-Fluid Atomisation: Factors and Effects Influencing the Spraying of a Liquid Sheet. Proc. of EMC 3 (2009), Innsbruck, Österreich, 863 – 875

Luidold S.:
Edler Rohstoff. Recycling Magazin, 64. Jg. (2009), Ausgabe 02, 26 – 29

Luidold S.:
Process and Product Developments for Niobium, Tantalum, Molybdenum and Tungsten. World of Metallurgy – Erzmetall 62 (2009), No. 2, 91 – 99

Moderer L., T. Messner and H. Antrekowitsch:
Influence and Investigation of the Parameters on the Gas Concentration in liquid Copper at Foundry Furnaces. Proc. of EMC 2 (2009), Innsbruck, Österreich, 687 – 701

Offenthaler D., F. Ludewig and J. Antrekowitsch:
Avoiding the Hot Acid Leaching Process in Zinc Hydrometallurgy by Reduction of Calcine. World of Metallurgy – Erzmetall 62 (2009), No. 6, 376 – 384

Offenthaler D., J. Antrekowitsch and F. Ludewig:
Options to Avoid the hot acid Leaching Process in Zinc Hydrometallurgy. Proc. of EMC 3 (2009), Innsbruck, Österreich, 1111 – 1125

Paschen P.: Quecksilber – Hermes – Merkur:
Metalle – Götter – Astronomen. World of Metallurgy – Erzmetall 62 (2009) No. 6, 386 – 390

Prillhofer B. and G. Lukesch:
Schmelzebehandlung von Aluminiumlegierungen im Rinneninduktions-Gießofen. Gießerei-Rundschau 56 (2009), Heft 3/4, 38 – 43

Prillhofer B., H. Böttcher and H. Antrekowitsch:
Weiterentwicklungen zur Evaluierung der Schmelzequalität von Aluminiumlegierungen, basierend auf dem Prefil-Verfahren. BHM, 154. Jg. (2009), Heft 7, 314 – 319

Prillhofer R., B. Prillhofer and H. Antrekowitsch:
Treatment of residues during aluminium recycling. EPD Congress 2009 (The Minerals, Metals & Materials Society), San Francisco, USA, 2009, 857 – 862

Pucher P., H. Antrekowitsch, H. Böttcher, H. Kaufmann and P. Uggowitzer:
Einfluss der Legierungszusammensetzung auf die mechanischen Eigenschaften der Sekundärlegierung A226 (AlSi9Cu3) im wärmebehandelten T6-Zustand. Giessereipraxis (2009), Nr. 11, 354 – 358

Pucher P., H. Böttcher, H. Kaufmann, H. Antrekowitsch and P. Uggowitzer:
Effect of compositional variations on the mechanical and fluidity performance of the aluminum cast alloy AlSi9Cu3. Proc. of 1st World PhD Foundry Conference (2009), Brünn, Tschechien

Pucher P., H. Böttcher, H. Kaufmann, H. Antrekowitsch and P. Uggowitzer:
Einfluss der Legierungszusammensetzung auf die mechanischen Eigenschaften und das Fließvermögen der Sekundärlegierung A226 (AlSi9Cu3). Giessereipraxis (2009), Nr. 3, 71 – 78

Ressel R., S. Luidold and H. Antrekowitsch:
Influence of Additional Burden Mixing at the Production of Ferromolybdenum. Proc. of EMC 4 (2009), Innsbruck, Österreich, 1469 – 1478

Ressel R., S. Luidold and H. Antrekowitsch:
Oxidation and Reduction Behaviour of Vanadium Containing Slag. World of Metallurgy – Erzmetall (2009), 164 – 170

Schmidl J., H. Kadereit, T. Bünger and H. Antrekowitsch:
Copper Converting at Aurubis – A survey of Minor Element Distribution. Proc. of EMC 2 (2009), Innsbruck, Österreich, 747 – 757

Schnideritsch H. and J. Antrekowitsch:
Schmelz- und rasterelektronenmikroskopische Untersuchungen an Stäuben aus der Stahlindustrie. Proc. von 2. Seminar – Vernetzung von Zink und Stahl (2009), Leoben, Österreich, 43 – 53

Schnideritsch H., J. Antrekowitsch, H. Antrekowitsch and C. Wagner:
Characterisation, Melting and Reduction Behaviour of Heavy Metal Containing Residues. Proc. of EMC 3 (2009), Innsbruck, Österreich, 1155 – 1167

Wagner C., S. Luidold, H. Antrekowitsch and K. Rimmer:
New Processes for the Production of Tin Chalcogenides. Proc. of EMC 3 (2009), Innsbruck, Österreich, 931 – 942

Wagner C., S. Luidold, H. Antrekowitsch and K. Rimmer:
Verfahrenskonzepte zur Herstellung von Zinnsulfid. BHM, 154. Jg. (2009), Heft 3, 101 – 106

Wenzl C., I. Filzwieser, H. Antrekowitsch and J. Pesl:
Investigations on Anode Casting Wheels to Optimise Anode Quality. Proc. of EMC 2 (2009), Innsbruck, Österreich, 793 – 805

Zunko H., A. Hackl, R. Ebner, R. Brisberger, F. Priewasser, C. Riener and H. Antrekowitsch:
Analyse des Umformverhaltens von Zn-Al-Mg-Beschichtungen. BHM, 154. Jg. (2009), Heft 7, 334 – 341

Zunko H., R. Ebner, A. Hackl, H. Antrekowitsch and R. Brisberger:
Investigations on Cracking Behaviour of Zn-Al-Mg-Coatings on Sheet Steel. Proc. of EMC 3 (2009), Innsbruck, Österreich, 1201 – 1210

Antrekowitsch H., P. Pucher and S. Konetschnik:
Aufbereitung und Metallurgie von metallhaltigen Reststoffen. BHM, 153. Jg. (2008), Heft 6, 230 – 234

Antrekowitsch H., S. Luidold and H. Gaugl:
Thermodynamic Calculations of the Production of Ferrovanadium from V-containing Steelworks Slags with a low Content of V2O5. Part 1. BHM, 153. Jg. (2008), Heft 3, 109 – 115

Antrekowitsch H.:
Charakterisierung von Reststoffen und Verfahrensoptimierung beim Recycling. Heft 115 der Schriftenreihe der GDMB Gesellschaft für Bergbau, Metallurgie, Rohstoff- und Umwelttechnik des 43. Metallurgischen Seminars, NE-Metallrecycling – Grundlagen und aktuelle Entwicklungen (2008), Dortmund, Deutschland, 27 – 36

Antrekowitsch J., T. Griessacher and D. Offenthaler:
Characterization of Zinc Containing Residues from Metallurgical Processes. Proc. of REWAS (2008) Cancun, Mexico, 775 – 783

Antrekowitsch J., T. Griessacher, D. Offenthaler and H. Schnideritsch:
Charakterisierung und Verhalten von Zink-, Blei- und Halogenverbindungen beim Recycling von Elektrolichtbogenofenstäuben. BHM, 153. Jg. (2008), Heft 3, 182 – 188

Antrekowitsch J.:
Behaviour of complex Residues from Steel Industry during Smelting and Reduction. Proc. of microCAD International Scientific Conference (2008), Miskolc, 1 – 8

Antrekowitsch J.:
Zinc Oxide from Recycling Processes as a Source for Electrolytic Galvanising. Proc. of REWAS (2008) Cancun, Mexico, 597 – 603

Handle B., S. Luidold, B. Zivanovic, M. Mnich and T. Márquez:
COP KIN Bottom Gas Purging: A Potential Application for Slag Cleaning Processes in the Primary Copper Industry. RHI Bulletin 2 (2008), 6 – 14

Koch S. and H. Antrekowitsch:
Free-Cutting Aluminium Alloys with Tin as Substitution for Lead. BHM, 153. Jg. (2008), Heft 7, 278 – 281

Konetschnik S., H. Schnideritsch, H. Antrekowitsch and D. Brandstätter:
Aufarbeitung wismuthaltiger Krätzen. BHM, 153. Jg. (2008), Heft 3, 115 – 120

Krassnig H., B. Kleimt, L. Voj and H. Antrekowitsch:
Laserbasierte Nachverbrennungssteuerung im Elektrolichtbogenofen. Stahl und Eisen 128 (2008) Nr. 9, 41 – 52

Luidold S. and H. Antrekowitsch:
Direct carburation of tungsten blue oxide in a fluidized bed reactor. International journal of refractory metals & hard materials 26 (2008), 324 – 328

Luidold S. and H. Antrekowitsch:
Wasserstoff – ein Reduktionsmittel mit Zukunft: Teil 2 – Thermodynamik der Wasserstoffreduktion. BHM, 153. Jg. (2008), Heft 3, 85 – 90

Paschen P.: Zinn – Zeus – Jupiter:
Metalle – Götter – Astronomen. World of Metallurgy – Erzmetall 61 (2008) No. 6, 382 – 387

Potesser M., B. Holleis and D. Spoljaric:
Burner Development of the Messer Group for the Nonferrous Metallurgical Industry. BHM, 153. Jg. (2008), Heft 3, 121

Potesser M., B. Holleis and H. Antrekowitsch:
New Pyrometallurgical Bullion Lead Refining Process. Proc. TMS (2008), New Orleans, USA, 467 – 472

Potesser M., B. Holleis, A. Hengelmolen, H. Antrekowitsch and D. Spoljaric:
Highest Efficiency and Economic Burner Concepts for the Metallurgical Industry. Proc. Light Metals TMS (2008), New Orleans, USA, 553 – 556

Potesser M., B. Holleis, D. Spoljaric and H. Antrekowitsch:
Oxipyr-Technik für Erwärmungsöfen zur Energiereduktion oder Produktionssteigerung. Stahl und Eisen, 128. Jg. (2008), Heft 7, 59 – 63

Prillhofer B. and G. Lukesch:
Schmelzebehandlung von Aluminiumlegierungen im Rinneninduktions-Gießofen. BHM, 153. Jg. (2008), Heft 3, 97 – 102

Prillhofer B., H. Antrekowitsch and H. Böttcher:
Optimisation of the melt quality in casting holding furnaces. Proc. Light Metals TMS (2008), New Orleans, USA, 627 – 632

Prillhofer B., H. Antrekowitsch, H. Böttcher and P. Enright:
Nonmetallic inclusions in the secondary aluminium industry for the production of aerospace alloys. Proc. Light Metals TMS (2008), New Orleans, USA, 603 – 608

Prillhofer B., H. Böttcher and H. Antrekowitsch:
Mögliche Einschlussbildung bei der Herstellung von Walzbarren der Legierung. EN AW-7075. Aluminium, 6, (2008), 78 – 84

Prillhofer R., B. Prillhofer and H. Antrekowitsch:
Einsatzmöglichkeit prozessbedingter Reststoffe beim Al-Recycling. Proc. of Depotech (2008), Leoben, Österreich, 231 – 236

Prillhofer R., B. Prillhofer and H. Antrekowitsch:
Verwertung von Reststoffen beim Aluminium-Recycling. BHM, 153. Jg. (2008), Heft 3, 103 – 108

Schnideritsch H., J. Antrekowitsch and C. Wagner:
Charakterisierung von schwermetallhaltigen Reststoffen. Proc. of Depotech (2008), Leoben, Österreich, 649 – 652

Wenzl C., I. Filzwieser, G. Mori and J. Pesl:
Investigations on Anode Quality in Copper Electrorefining. BHM, 153. Jg. (2008), Heft 3, 91 – 96

Antrekowitsch H. and T. Messner:
Nonferrous metals at the recycling of electronic scrap – treatment and metallurgical processing. Proc. of ECO-X: Sustainable Recycling Management & Recycling Network Centrope (2007), Wien, Österreich, 111 – 118

Antrekowitsch J.:
The behavior of iron and zinc containing slags on an inductively heated coke bed. Proc. of EMC 2 (2007), Düsseldorf, Deutschland, 823 – 830

Koch S. and H. Antrekowitsch:
Study of the precipitation kinetics in AlMgZn alloys by using DSC. Proc. of EMC 4 (2007), Düsseldorf, Deutschland, 1947 – 1956

Koch S.:
Aluminium Alloys for Wire Harenesses in Automotive Engineering. BHM 152 (2007) 3, 62 – 67

Konetschnik S., D. Offenthaler, J. Antrekowitsch and J. Sitter:
Recovery of PGMs from spent catalyst material with a new HCl – H2SO4 leaching process. Proc. of EMC 2 (2007), Düsseldorf, Deutschland, 679 – 690

Konetschnik S., J. Antrekowitsch, D. Offenthaler and H. Antrekowitsch:
Thermische Vorbehandlung PGM-haltiger Katalysatoren für die hydrometallurgische Aufarbeitung. BHM 152 (2007) 3, 68 – 75

Krassnig H., S. Luidold, H. Antrekowitsch, B. Kleimt and L. Voj:
Energie- und Stoffbilanzierung eines 36-t-Elektrolichtbogenofens. BHM 152 (2007) 9, 287 – 291

Luidold S. and H. Antrekowitsch: Hydrogen as a Reducing Agent:
State-of-the-Art Science and Technology. JOM 59 (2007) 6, 20 – 26

Luidold S. and H. Antrekowitsch: Hydrogen as a Reducing Agent:
Thermodynamic possibilities. JOM 59 (2007) 10, 58 – 62

Luidold S. and H. Antrekowitsch:
Möglichkeiten zur Lösung der Chromproblematik in der Metallurgie. BHM 152 (2007) 3, 47 – 52

Luidold S. and H. Antrekowitsch:
Wasserstoff – ein Reduktionsmittel mit Zukunft: Teil 1 – Stand der Technik. BHM 152 (2007) 9, 292 – 295

Luidold S., H. Antrekowitsch and R. Ressel:
Production of Nb – powder by magnesiothermic reduction of niobium oxides in a cyclone reactor. Proc. of EMC 2 (2007), Düsseldorf, Deutschland, 995 – 1006

Luidold S., H. Antrekowitsch and R. Ressel:
Production of niobium powder by magnesiothermic reduction of niobium oxides in a cyclone reactor. Int. Journal of Refractory Metals and Hard Materials 25 (2007) 5-6, 423 – 432

Matl B., S. Luidold, H. Antrekowitsch, P. Ebner and K. Rimmer:
Charakterisierung eines neuen Düsensystems zur Zerstäubung von Metallschmelzen. BHM 152 (2007) 2-3, 76 – 79

Messner T., S. Pogatscher, H. Antrekowitsch and J. Pesl:
Themodynamic modelling of the behaviour of accompanying elements in secondary copper production. Proc. of EMC 4 (2007), Düsseldorf, Deutschland, 1819 – 1836

Mubarok Z., H. Antrekowitsch and G. Mori:
Passivation Behaviour of Copper Anodes with Various Chemical. Proceedings of TMS 136th Annual Meeting & Exhibiton (2007), 1 – 10

Mubarok Z., H. Antrekowitsch, G. Mori, A. Lossin and G. Leuprecht:
Problems in the Electrolysis of Copper Anodes with high Contents of Nickel, Antimony, Tin and Lead. Proc. of Copper/Cobre V (2007), Toronto, Kanada, 59 – 76

Paschen P.:
Heavy Nonferrous Metals in World Economy in the Last 50 Years. Proc. of EMC 1 (2007), Düsseldorf, Deutschland, 355 – 369

Paschen P.:
Heavy Nonferrous Metals in World Economy in the Last 50 Years. World of metallurgy – Erzmetall (2007) 60, 263 – 272

Potesser M., B. Holleis, D. Spoljaric, U. Konold and A. Scherello:
New Testing Chamber at Messer Austria to develop burners for ferrous, nonferrous and glass production. Proceedings of TMS 136th Annual Meeting & Exhibiton (2007), 731 – 738

Potesser M., H. Antrekowitsch and B. Holleis:
Burner Development Chamber for the Copper and Nonferrous Industry. Proc. of Copper/Cobre III (2007), Toronto, Kanada, 681 – 700

Potesser M., H. Antrekowitsch and J. Köhöhofer:
The Elliptical Anode Furnace – A Metallurgical Comparison. RHI Bulletin 2 (2007), 44 – 48

Potesser M., H. Antrekowitsch and U. Zulehner:
The Elliptical Anode Furnace – A metallurgical Comparison – Part One. Proc. of Copper/Cobre III (2007), Toronto, Kanada, 667 – 680

Potesser M., H. Antrekowitsch and U. Zulehner:
The new elliptical anode furnace metallurgical compared with conventional copper anode furnaces. Proc. of EMC 1 (2007), Düsseldorf, Deutschland, 157 – 169

Prietl T., O. Zach, B. Drew and H. Antrekowitsch:
Understanding vessel integrity, a study of the thermo-mechanical behaviour of refractory lining segments. Proc. of EMC 2 (2007), Düsseldorf, Deutschland, 1017 – 1028

Prillhofer B. and H. Antrekowitsch:
Abscheidung von nichtmetallischen Einschlüssen bei der Raffination von Aluminiumlegierungen. BHM 152 (2007) 3, 53 – 61

Prillhofer B.:
Lifetime assessment of cyclic thermo – mechanical loaded strip casting mills. Proc. of EMC 4 (2007), Düsseldorf, Deutschland, 1863 – 1875

Ressel R., S. Luidold, H. Antrekowitsch and M. Hochenhofer:
Influence of the basicity and dwell time of slags on the oxidation state of vanadium ions. Proc. of EMC 2 (2007), Düsseldorf, Deutschland, 1029 – 1040

Vetterli C., V. Tucek, M. Potesser and B. Holleis:
Úspešná spolupráce pri dmýcháí plynú do ocelové lázne. Teorie a praxe výroby a zpracování oceli. 23. celostátni konference se zahranièní úèastí (2007), Ostrava, Tschechien, 111 – 121

Wenzl C., A. Filzwieser and H. Antrekowitsch:
Review of Anode Casting Part I: Chemical Anode Quality. World of metallurgy – Erzmetall 60 (2007), 77 – 83

Wenzl C., A. Filzwieser and H. Antrekowitsch:
Review of Anode Casting Part II: Physical Anode Quality. World of metallurgy – Erzmetall 60 (2007), 83 – 88

Wenzl C., H. Antrekowitsch, B. Kronberger and E. Locher:
Current activities for increasing the recycling efficiency at the Fernwärme Wien DMA battery recycling plant. Proceedings of 12th ICBR (2007)

Wenzl C., H. Antrekowitsch, I. Filzwieser and J. Pesl:
Anode Casting – Chemical Anode Quality. Proc. of Copper/Cobre V (2007), Toronto, Kanada, 91 – 110

Wenzl C., I. Filzwieser and A. Filzwieser:
Review of Anode Casting – Physical Anode Quality. Proc. of EMC 1 (2007), Düsseldorf, Deutschland, 209 – 225

Antrekowitsch H. and F. Prior:
Elektronikschrottrecycling. Fortschritt-Berichte VDI, Technik und Wirtschaft, Nachhaltigkeit in der Elektron(nik)industrie 16 (2006) 179, 193 – 211

Antrekowitsch H. and M. Hochenhofer:
Winnacker-Küchler. Chemische Technik Band 6a: Stahlveredler; 5., erweiterte und aktualisierte Auflage. (2006)

Antrekowitsch H., F. Prior and W. Spruzina:
Recycling von Metallen aus Elektronikschrott. Fortschritt-Berichte VDI, Technik und Wirtschaft, Nachhaltigkeit in der Elektron(nik)industrie 16 (2006) 179, 212 – 239

Antrekowitsch H., M. Complojer, S. Koch, P. Paschen, K. Gamweger and A. Kraly:
Porous Plugs for Gas Purging in the Aluminium Industry. Proc.of Aluminium 2006: International Symposium on Aluminium: From Raw Materials to Applications as held at the 45th Annual Conference of Metallurgists of CIM (COM 2006) (2006), Montreal, Kanada, 839 – 850

Antrekowitsch H., M. Potesser, W. Spruzina and F. Prior:
Metallurgical Recycling of Electronic Scrap. Proc.of 135th TMS Annual Meeting & Exhibition (2006), San Antonio, Texas, USA, 899 – 908

Antrekowitsch H.:
Universitärer Forschungscluster “Sustainable Technologies in Metal Production and Processing” – Nichteisenmetallurgie. BHM 151 (2006) 7, 266 – 269

Antrekowitsch J. and D. Offenthaler:
Problemstellungen und Lösungsansätze in der Aufarbeitung zinkhältiger Stahlwerksstäube. Proc.of Vernetzung von Zink und Stahl – 42.Metallurgisches Seminar der GDMB (2006), Leoben, Österreich, 17 – 24

Antrekowitsch J., D. Offenthaler and A. Edlinger:
Inducarb – A new reducing Facility for various Oxidic. Proc.of Sohn International Symposium 5 (2006), 163 – 170

Hochenhofer M., H. Antrekowitsch, M. Potesser and W. Labenbacher:
Recycling of Oxidic Waste from the Ferroalloy Production. Proc.of 135th TMS Annual Meeting & Exhibition (2006), San Antonio, Texas, USA, 979 – 988

Koch S., H. Antrekowitsch, G. Anger and J. Enser:
Investigation of the Correlation between Homogenisation and Tensile Properties of AlMgSi-Alloys. Proc.of Aluminium 2006: International Symposium on Aluminium: From Raw Materials to Applications as held at the 45th Annual Conference of Metallurgists of CIM (COM 2006) (2006), Montreal, Kanada, 735 – 746

Konetschnik S., M. Potesser, H. Antrekowitsch and R. Leitner:
Substitution von herkömmlichen Federstählen der Spezialfahrzeugindustrie durch Nichteisenmetalllegierungen. Metall 5 (2006), 294 – 298

Luidold S. and H. Antrekowitsch:
New Process for Direct Carburation of Tungsten Blue Oxide to Tungsten Carbide. Erzmetall 59 (2006) 6, 327 – 332

Luidold S., P. Paschen and H. Antrekowitsch:
New Process for Niobium Powder Production. Erzmetall 59 (2006) 4, 202 – 206

Matl B., C. Redl and C. Honeger:
Numerical and Experimental Studies on a Two-fluid Atomizing System. Erzmetall 59 (2006) 6, 333 – 337

Offenthaler D. and J. Antrekowitsch:
Fluor- und Chlor-Problematik beim Recycling zinkhältiger Stahlwerksstäube. Proc.of Vernetzung von Zink und Stahl – 42.Metallurgisches Seminar der GDMB (2006), Leoben, Österreich, 27 – 40

Offenthaler D., J. Antrekowitsch and S. Konetschnik:
Recycling of Platinum from spent Catalysts. Proc.of Sohn International Symposium 5 (2006), San Diego, Californien, USA, 451 – 458

Paschen P. and H. Antrekowitsch:
From Bauxite to Secoundary Aluminium – Consumption and Sustainable Development: A World-Wide Survey. Proc.of Bauxite & Alumina: International Symposium on Aluminium: From Raw Materials to Applications as held at the 45th Annual Conference of Metallurgists of CIM (COM 2006) (2006), Montreal, Kanada

Potesser M., H. Antrekowitsch, H. Rinnhofer and U. Zulehner:
A comparison of conventional copper anode furnaces with the new elliptical anode furnace concept. Proc.of Sohn International Symposium 5 (2006), San Diego, Californien, USA, 109 – 120

Potesser M., T. Schoeberl, H. Antrekowitsch and J. Bruckner:
The Characterization of the Intermetallic Fe-Al Layer of Steel-Aluminium Weldings. Proc.of 135th TMS Annual Meeting & Exhibition (2006), San Antonio, Texas, USA, 167 – 176

Prietl T., O. Zach and H. Studnicka:
The Evaluation of Refractory Lining Thermo-Mechanical Properties. Erzmetall 3 (2006), 127 – 132

Seebacher H., W. Sunk, H. Antrekowitsch and M. Klade:
Recycling von Magnesium in der Automobilindustrie. Metall 4 (2006), 203 – 209

Seebacher H., W. Sunk, H. Antrekowitsch and W. Sunk:
Recycling von Aluminium in der Automobilindustrie. Aluminium 82 (2006) 1/2, 24 – 31

Spoljaric D., B. Holleis and M. Potesser:
Oxygen Applications in the metallurgy. Proc. of Expodonbass (2006), Donetsk, Ukraine, 24 – 34

Spoljaric D., B. Holleis, M. Potesser and N. Pavlovic:
Application of oxygen for melting process of metals. Proc. of 4th Balkan Conference on Metallurgy (2006), Zlatibor, Serbien

Triessnig A., H. Studnicka and T. Prietl:
Determination of Thermo-Mechanical Properties at the RHI Refractories Technology Center Leoben. RHI Bulletin 1 (2006), 33 – 37

Wenzl C., G. Graller-Kettler and J. Pesl:
Liquid Slag Reduction. Erzmetall 59 (2006) 1, 26 – 32

Wenzl C., H. Antrekowitsch, J. Antrekowitsch and D. Offenthaler:
Aufarbeitung von verunreinigten Sn-Schrotten und Sn-hältigen Reststoffen. Proc. of Depotech (2006), Leoben, Austria, 391 – 398

Wenzl C.:
Metallurgische Sommerexkursion 2005 in die USA und nach Mexiko. Erzmetall 59 (2006) 2, 108 – 114

Zach O., K. Gamweger and T. Prietl:
CONSCAN, a laser measurement for furnaces which are operating on high temperatures. Proc. of 135th TMS Annual Meeting & Exhibition (2006), San Antonio, Texas, USA, 11 – 14

Antrekowitsch H., C. Wenzl, I. Filzwieser and J. Pesl:
Pyrometallurgical refining of copper in an anode furnace. Proc. of 134th TMS Annual Meeting & Exhibition (2005), San Francisco, USA, 191 – 204

Antrekowitsch H., F. Prior and W. Staber:
Recycling of copper and noble metals from electronic waste. Proc. of eco-X (2005), Wien, Österreich, 549 – 562

Antrekowitsch H., M. Complojer, K. Gamweger and A. Kraly:
Process optimisation and quality improvement by gas-purging in the Al-industry. Proc. of the 2nd International Light Metals Technology Conference (2005), St. Wolfgang, Österreich, 97 – 101

Antrekowitsch J. and A. Sprung:
Reduction of Melted Steel Mill Dust in an Iron Bath – a “Zero Waste” Solution. Proc.of International Symposium on Lead & Zinc Processing 1 (2005), Kyoto, Japan, 779 – 789

Antrekowitsch J., G. Graller-Kettler, B. Matl and A. Pestalozzi:
Use of the Flash Reactor Principle to Recover Zinc from Steel-Mill Dusts. Journal of Metals (2005), 43 – 46

Antrekowitsch J., M. Hochenhofer and D. Offenthaler:
A Thermochemical Study of Different Options for Halogen Removal from Nonferrous Metal-Containing Wastes. Proc. of 134th TMS Annual Meeting & Exhibition (2005), San Francisco, USA, 1011 – 1019

Hanko G., S. Griesser and T. Angerer:
Aufarbeitung von organisch beschichteten Magnesiumdruckgussteilen. Aluminium 3 (2005), 202 – 208

Hermann C., H. Antrekowitsch, T. Luger, H. Seebacher and M. Stachura:
Product development and metallurgy – Combining two views on the calculation of recovery rates in weee recycling. Proc.of 7th World Congress on Recovery, Recycling and Re-Integration CD-ROM (2005), Peking, China

Hochenhofer M., H. Antrekowitsch and M. Juhart:
Main parameters on the performance of a desulfurization of Ferro-Nickel by slag reaction. Proc. of 134th TMS Annual Meeting & Exhibition (2005), San Francisco, USA, 629 – 639

Jeitler B., W. Staber, H. Antrekowitsch and G. Panowitz:
Demontage, Verwertung und Entsorgung von EAG´s. Proc. of eco-X (2005), Wien, Österreich, 577 – 592

Luidold S. and P. Paschen:
Processes for Niobium Powder – a Literature Evaluation, Part I: Reduction of Niobium Compounds. Erzmetall 58 (2005) 2, 89 – 94

Luidold S. and P. Paschen:
Processes for Niobium Powder – a Literature Evaluation, Part II: Post Reduction Treatments. Erzmetall 58 (2005) 4, 198 – 202

Matl B., C. Redl and H. Antrekowitsch:
Tribojet atomization unit: Preliminary test of a new method. Proc.of EMC Tribojet atomization unit: Preliminary test of a new method. EMC (2005), Dresden, Deutschland, 795 – 805

Matl B., C. Redl, H. Antrekowitsch and A. Edlinger:
Tribojet, a New and Innovative Device for Atomizing Liquid Melts. Proc. of 16th International Plansee Seminar 1 (2005), Reutte, Österreich, 580 – 592

Matl B., H. Antrekowitsch and A. Pestalozzi:
Reactive Atomization of black copper by using the PATCO-Sprayconvertor. Erzmetall 58 (2005) 2, 83 – 88

Matl B., J. Antrekowitsch and D. Offenthaler:
Processing of residues by a new developed Flash-Reactor. Proc. of microCAD 2005 (2005), Miskolc, Ungarn, 19 – 24

Messner T., H. Antrekowitsch and J. Pesl:
Element Distribution and Process Optimization at the Secondary Metallurgy of Copper. Proc.of EMC (2005) 1, Dresden, Deutschland, 49 – 62

Messner T., H. Antrekowitsch and J. Pesl:
Stoffstromanalyse am Schachtofen der Montanwerke Brixlegg AG. BHM 7 (2005), 251 – 257

Mubarok Z., I. Filzwieser and P. Paschen:
Analysis of industrial nodulated cathodes from Atlantic Copper and New Boliden. Erzmetall 58 (2005) 4, 203 – 209

Mubarok Z., I. Filzwieser and P. Paschen:
Dendritic Cathode Growth during Copper Electrorefining in the Presence of Solid Particles. Erzmetall 58 (2005) 6, 113 – 119

Mubarok Z., I. Filzwieser and P. Paschen:
Electrochemical and Metallographic Characterization of Inhibitor Variation in Copper Refining Electrolysis. Proc.of EMC (2005) 1, Dresden, Deutschland, 109 – 122

Potesser M., H. Schnideritsch and H. Antrekowitsch:
Chromium in different metallurgical Residues with special regard to hexavalent chromium. Proc.of EMC (2005) 3, Dresden, Deutschland, 1205 – 1219

Potesser M.:
An Overview of Chromium in the Metallurgy. Proc. of microCAD 2005 (2005) Section D, Miskolc, Ungarn, 37 – 38

Potesser M.:
Nichteisenmetallurgie – Exkursion der Montanuniversität Leoben nach Spanien und Portugal. Erzmetall 58 (2005) 4, 226 – 230

Prietl T. and H. Antrekowitsch:
The Evaluation of Refractory Lining Thermo-Mechanical Properties. Proc.of EMC (2005) 3, Dresden, Deutschland, 1099 – 1112

Prietl T., A. Filzwieser and S. Wallner:
Productivity Increase in a Peirce-Smith Converter using the COP KIN and OPC System. Proc. of 134th TMS Annual Meeting & Exhibition (2005), San Francisco, USA, 177 – 190

Ressel R., M. Hochenhofer and M. Juhart:
Processing of Vanadiferous Residues to Ferrovanadium. Proc. of 134th TMS Annual Meeting & Exhibition (2005), San Francisco, USA, 763 – 778

Seebacher H., H. Antrekowitsch, C. Rammer, A. Sigmund and P. Wohlmuth:
Optimierung der Masselvorbehandlung bei der Sekundärmetallurgie von Magnesium. Druckguss-Praxis 01 (2005), 13 – 18

Wenzl C., G. Graller-Kettler and J. Pesl:
Liquid Slag Reduction. Proc.of EMC (2005) 1, Dresden, Deutschland, 75 – 89

Zach O., K. Gamweger, G. Lukesch and A. Filzwieser:
CFD-modelling in the non ferrous metals industry. Proc.of EMC (2005) 3, Dresden, Deutschland, 1317 – 1324

Antrekowitsch H. and F. Prior:
Recycling of metals and plastics from electronic scrap. Proc.of Global Conference on Sustainable Product Development and LCE (2004), Berlin, Deutschland, 121 – 126

Antrekowitsch H., J. Antrekowitsch and R. Hepberger:
Pyrometallurgische Aufarbeitung von Reststoffen in einem Flash-Reaktor. Proc. of Depotech (2004), Leoben, Österreich, 197 – 204

Antrekowitsch H., T. Prietl and A. Filzwieser:
Spülgastechnik in der Kupferindustrie. BHM 149 (2004) 5, 186 – 192

Antrekowitsch H.:
Verringerung der CO2-Emissionen durch Optimierung der Raffinationsverfahren in der Sekundärmetallurgie der NE-Metalle. Proc.of Forum für Metallurgie und Werkstofftechnik (2004), Leoben, Österreich, 39

Antrekowitsch J. and H. Antrekowitsch:
Dezincing of steel scrap. A solution for the zinc-iron problem in steel industry?. BHM 149 (2004) 1, 28 – 34

Antrekowitsch J., D. Offenthaler and A. Edlinger:
Zinc Containing Steel Mill Dusts – Between Recycling And Landfilling. Proc. of Global Symposium on Recycling, Waste Treatment and Clean Technology III (2004), Madrid, Spanien, 2133 – 2141

Ebner P., H. Antrekowitsch, K. Gamweger and K. Campabadal:
Gas treatment as a refining process for aluminuim recycling. Proc. of Global Symposium on Recycling, Waste Treatment and Clean Technology I (2004), Madrid, Spanien, 903 – 911

Filzwieser I., H. Antrekowitsch and A. Filzwieser:
Potential Measurements in a High Current Winning Electrolysis. Erzmetall 57 (2004) 2, 63 – 68

Filzwieser I., O. Zach and A. Filzwieser:
Modelling of a Near Technical Scale Cell for Copper Refining Electrolysis. BHM 149 (2004) 1, 5 – 8

Hebenstreit R., H. Antrekowitsch, U. Galovsky and H. Kaufmann:
Analytik und Behandlung von Magnesiumkrätzen aus der Sekundärmetallurgie. Gießerei-Praxis 12 (2004), 449 – 454

Hochenhofer M., H. Antrekowitsch and M. Juhart:
Adaptation of Process Control to increased Phosphorous Content of Raw Materials in Ferrovanadium Production. Proc. of Global Symposium on Recycling, Waste Treatment and Clean Technology I (2004), Madrid, Spanien, 513 – 523

Hochenhofer M., H. Antrekowitsch and M. Juhart:
Einflussparameter auf eine Entschwefelung nach dem Schlackenreaktionsverfahren bei der Herstellung von Ferronickel aus Sekundärrohstoffen. Proc. of Depotech (2004), Leoben, Österreich, 729 – 732

Hochenhofer M., H. Antrekowitsch, J. Leitner and E. Pankratz:
Optimierung der Entschwefelung bei der Herstellung von Ferronickel aus Sekundärrohstoffen. Metall 58 (2004) 4, 196 – 202

Messner T., H. Antrekowitsch, J. Pesl and M. Hofer:
Prozessoptimierung durch Stoffstromcontrolling. Proc. of Depotech (2004), Leoben, Österreich, 693 – 696

Paschen P.:
Die Nichteisenmetallurgie in Österreich. Erzmetall 43 (2004), 455 – 457

Paschen P.:
Institut für Technologie und Hüttenkunde der Nichteisenmetalle. 150 Jahre Montanuniversität Leoben (2004), 527

Paschen P.:
Rohstoffverknappung bei Metallen?. Proc. of Symposium “Neue Rohstoffe für neue Technologien” (2004), Wien, Österreich

Paschen P.:
University Education in Nonferrous Metallurgy in Europe. BHM 149 (2004) 1, 1 – 4

Prietl T., A. Triessnig and A. Filzwieser:
Determining the Thermal Parameters of Complex Furnace Linings. RHI Bulletin 2 (2004), 26 – 30

Prietl T., H. Antrekowitsch, I. Filzwieser and K. Gamweger:
Spülgasbehandlung in der Kupfer- und Aluminium-Sekundärmetallurgie. Proc. of Depotech (2004), Leoben, Österreich, 721 – 724

Schuster S., G. Graller-Kettler, H. Antrekowitsch and J. Pesl:
Elimination Of Impurities From Anode Copper By Selective Oxidation. Proc. of Global Symposium on Recycling, Waste Treatment and Clean Technology III (2004), Madrid, Spanien, 2069 – 2080

Seebacher H., H. Antrekowitsch, F. Prior and R. Leitner:
Recycling of electronic scrap. Proc. of Global Symposium on Recycling, Waste Treatment and Clean Technology III (2004), Madrid, Spanien, 2623 – 2633

Seiler S., M. Hochenhofer, H. Antrekowitsch, M. Juhart and E. Pankratz:
Ermittlung der Einflussgrößen bei der Herstellung von Ferrovanadium aus Sekundärrohstoffen. Metall 10 (2004), 642 – 647

Thuy M., J. Antrekowitsch, H. Antrekowitsch and J. Pesl:
Recovery of Valuable Metals from Sludges and Residues of the Secondary Copper Industry by atmospheric Leaching. BHM 149 (2004) 1, 9 – 15

Waltritsch S.:
Processing of Electronic scrap. BHM 149 (2004) 1, 19 – 27

Antrekowitsch H.:
Gas treatment in the secondary metallurgy of nonferrous metals. Proc. of EMC (2003), Hannover, Deutschland, 751 – 764

Antrekowitsch H.:
Networking in the Field of Metal Recycling. BHM 148 (2003), 5 – 10

Antrekowitsch H.:
Recycling von Verbundwerkstoffen aus Stahl und Nichteisenmetallen: Technische Möglichkeiten und gesetzliche Rahmenbedingungen. Proc. of Forum für Metallurgie und Werkstofftechnik (2003), Leoben, Österreich

Antrekowitsch J. and H. Antrekowitsch:
Dezincing of steel scrap. A solution for the zinc-iron problem in steel industry?. Proc. of EMC (2003), Hannover, Deutschland, 449 – 463

Antrekowitsch J. and H. Antrekowitsch:
Einfluss unterschiedlicher Reduktionsmittel bei der pyrometallurgischen Aufarbeitung von Elektrolichtbogenofenstäuben. Stahl und Eisen 123 (2003) 5, 61 – 67

Antrekowitsch J. and H. Antrekowitsch:
Investigations in different reducing agents for the pyrometallurgical treatment of steel mill dusts. Proc. of 132th TMS Annual Meeting & Exhibition (2003), San Diego, USA, 539 – 549

Antrekowitsch J. and H. Antrekowitsch:
Recovery of Zinc and Iron from EAF Steel Mill Dusts with Special Focus on Halogen and Residues. BHM 148 (2003) 1, 15 – 20

Bernatskaja A. and P. Paschen:
Molten Salt Electrolysis of Niobium. BHM 148 (2003) 1, 21 – 24

Filzwieser A., K. Gamweger, O. Zach and G. Lukesch:
Computational Fluid Dynamics – Modelling in the Aluminium and Copper Industry. RHI Bulletin 1 (2003), 5 – 8

Filzwieser A., T. Prietl, P. Nystedt and P. Olsson:
Implementation of the RHI COP KIN System in Peirce-Smith-Converters. RHI Bulletin 1 (2003), 13 – 15

Filzwieser I. and H. Antrekowitsch:
CFD – Modelling of the Electrolyte Flow in a Copper Electrolysis Cell. Proc. of microCAD 2003 (2003), Miskolc, Ungarn, 1 – 14

Filzwieser I. and P. Paschen:
Cathodic Current Density Distribution in a Cu Refining Electrolysis. Proc. of Copper/Cobre (2003), Santiago de Chile, Chile, 363 – 376

Filzwieser I. and P. Paschen:
Current Density Distribution in a Cu Refining Electrolysis due to Geometrical Conditions. Proc. of EMC (2003), Hannover, Deutschland, 83 – 96

Filzwieser I., O. Zach and A. Filzwieser:
CFD – Modelling of a near technical scale cell for copper refinery electrolysis. BHM 149 (2003), 5 – 8

Filzwieser I.:
Copper Research Center. Triple M – Annual Report 2002 (2003) 2, 21

Hanko G. and G. Macher:
Technologies for efficient Mg-scrap recycling. roc.of 132th TMS Annual Meeting & Exhibition (2003), San Diego, USA, 29 – 32

Hochenhofer M., H. Antrekowitsch, M. Juhart and A. Filzwieser:
The Effect of a Gas Purging System on the Desulphurization of Ferro-Nickel in an Electric Arc Furnace at the Treibacher Industry AG. RHI Bulletin 1 (2003), 22 – 24

Male A., H. Antrekowitsch and A. Kraly:
Einfluss des Kalziums in Sekundäraluminiumschmelzen. Druckguss-Praxis (2003) 4, 152 – 160

Moldovanska N., H. Sommerhofer, P. Paschen and R. Drimitrow:
Beseitigung des Ferritbildungsproblems bei der thermischen Behandlung von Marmatit. BHM 148 (2003) 1, 25 – 30

Paschen P.:
1/3 Jahrhundert Nichteisenmetallurgie – Institutskolloquium. Hochschulreden XXVIII (2003), 1 – 24

Paschen P.:
Christian-Doppler-Labor für Sekundärmetallurgie. BHM 148 (2003) 1, 1 – 4

Paschen P.:
Die historische Nickelverhüttung im Raum Schladming-Mandling. res montanarum 30 (2003), 40 – 46

Paschen P.:
University Education in Nonferrous Metallurgy in Europe. Proc.of EMC (2003), Hannover, Deutschland, 617 – 626

Sommerhofer H.:
Influence Parameters on Continuous Casting of Aluminium. Proc. of 132th TMS Annual Meeting & Exhibition (2003), San Diego, USA, 733 – 740

Sommerhofer H.:
New approaches to solve the problems of surface defects in continuous casting. Proc. of EMC (2003), Hannover, Deutschland, 675 – 690

Thuy M., J. Antrekowitsch, H. Antrekowitsch and J. Pesl:
Recovery of Valuable Metals from Sludges and Residues of the Secondary Copper Industry by atmospheric Leaching. Proc. of EMC (2003), Hannover, Deutschland, 221 – 240

Waltritsch S.:
Electronic Scrap Processing. BHM 148 (2003) 1, 10 – 14

Waltritsch S.:
Processing of Electronic scrap. Proc. of EMC (2003), Hannover, Deutschland, 1009 – 1024

Antrekowitsch H. and G. Hanko:
Metallurgie des Leichtmetallrecyclings bei Altautos unter Berücksichtigung der gesetzlichen Rahmenbedingungen. Erzmetall 55 (2002) 11, 598 – 605

Antrekowitsch H., G. Hanko and P. Ebner:
Recycling of different types of magnesium scrap. Proc. of 131th TMS Annual Meeting & Exhibition (2002), Seattle, USA, 43 – 48

Antrekowitsch H., G. Hanko and P. Paschen:
Recycling of Aluminium and Magnesium Parts from Used Cars: Legislative Frame and Consequences for Metallurgy and Material Design. Proc. of Environmental Sustainability Conference and Exhibition (2002), 475 – 481

Antrekowitsch J., H. Antrekowitsch and H. Seebacher:
Aufarbeitung von Stahlwerksstäuben. Erzmetall 55 (2002) 5, 49 – 56

Filzwieser I.:
Weltgrößte Kupfererzeuger setzen auf Leobner Know-How. Metall 56 (2002) 9, 705

Hanko G., H. Antrekowitsch and P. Ebner:
Recycling Automotive Magnesium Scrap. Journal of Metals 54 (2002) 2, 51 – 54

Leuprecht G., G. Hanko and W. Riederer:
Technologies for the refining of contaminated magnesium melts. Aluminium 78 (2002) 11, 1000 – 1005

Macher G., G. Hanko and W. Riederer:
Technologien zur Raffination von kontaminierten Magnesiumschmelzen / Technologies for the refining of contaminated magnesium melts. Aluminium 78 (2002) 11, 1000 – 1005

Maurer G., G. Hanko and G. Marescch:
Entkupferung wässriger Lösungen mit Hilfe der Gravifoli-Technologie. BHM 147 (2002), 283 – 287

Paschen P.:
25 % der Welterzeuger schauen auf “CESAR”. Triple M – Außeninstitut 1/02 (2002), 5

Paschen P.:
Impact of Cycle Management on energy Consumption in the Smelting Industry. Cycle Management (2002), 53 – 58

Paschen P.:
Metallurgy in Austria. BHM 147 (2002) 7&8, 229 – 234

Paschen P.:
Stubborn metals – we tame you. Triple M – Annual Report 2001 (2002), 21

Paschen P.:
Zwischen Skylla und Charybdis – Zur Standortbestimmung einer Universität. BHM 147 (2002) 5, 125 – 126

Sommerhofer H. and P. Paschen:
Einflussparameter auf das Stranggießen von NE-Metallen – Gießparameter. Metall 56 (2002) 11, 706 – 711

Sommerhofer H., A. Petrus, H. Antrekowitsch and P. Paschen:
Beitrag zur Gefügeentwicklung bei der Herstellung thixotroper Aluminiumwerkstoffe. Gießerei-Praxis 6 (2002), 219 – 222

Antrekowitsch H., P. Paschen and J. Antrekowitsch:
Mengen- und Energiebilanz bei der Herstellung von Zink. Erzmetall 54 (2001) 6, 301 – 311

Antrekowitsch H.:
NE-Metall-Recycling in der Kfz-Industrie. BHM 146 (2001) 5, 188 – 193

Antrekowitsch J. and H. Antrekowitsch:
Hydrometallurgically Recovering Zinc from Electric Arc Furnace Dusts. Journal of Metals 53 (2001) 12, 26 – 28

Antrekowitsch J.:
Hydrometallurgische Aufarbeitung von zinkhältigen Stahlwerksflugstäuben aus dem Konverterbereich. BHM 146 (2001) 5, 210 – 215

Hanko G.:
The New Jersey Refining Process: A Key Issue for Zinc Recycling. Proc.of EMC (2001), Friedrichshafen, Deutschland, 211 – 225

Paschen P. and D. Altenpohl:
Secondary aluminium is the raw material highlight of the 21st century. Aluminium 77 (2001), 8 – 13

Paschen P.:
Die wirtschaftliche Bedeutung des Leichtmetallrecyclings. BHM 146 (2001) 5, 184 – 187

Paschen P.:
Nichteisenmetallurgie der Montanuniversität Leoben. BHM 146 (2001) 5, 174 – 175

Sommerhofer H., P. Anton, H. Antrekowitsch and P. Paschen:
Druckabhängigkeit des Gleichgewichts im System Aluminium-Silicium. Giessereiforschung 53 (2001) 1, 25 – 29

Adelhardt W. and H. Antrekowitsch:
Stoffmengenflüsse und Energiebedarf bei der Gewinnung ausgewählter mineralischer Rohstoffe. Teilstudie Chrom. Geologisches Jahrbuch, Sonderheft 2 (2000)

Adelhardt W. and H. Saiger:
Stoffmengenflüsse und Energiebedarf bei der Gewinnung ausgewählter mineralischer Rohstoffe. Teilstudie Mangan. Geologisches Jahrbuch, Sonderheft 2 (2000)

Antrekowitsch H. and P. Paschen:
Ist Eisen ein Metall? .. aus der Sicht des Nichteisenmetallurgen. BHM 145 (2000) 9, 363 – 367

Hanko G., A. Lebleu, M. Sibony and J. Lecadet:
Optimization of the New Jersey Refining Process. Proc. of Lead-Zinc 2000 Symposium as held at the TMS Fall Extraction & Process Metallurgy Meeting (2000), Pittsburgh, USA, 481 – 496

Hein K. and A. Filzwieser:
Elektrolytische Kupfergewinnung mit bipolaren Elektroden und hohen Stromdichten. Erzmetall 53 (2000), 217 – 221

Krauß U., H. Wagner and G. Mori:
Stoffmengenflüsse und Energiebedarf bei der Gewinnung ausgewählter mineralischer Rohstoffe. Teilstudie Kupfer. Geologisches Jahrbuch, Sonderheft 2 (2000)

Mori G. and W. Adelhardt:
Stoffmengenflüsse und Energiebedarf bei der Gewinnung ausgewählter mineralischer Rohstoffe. Teilstudie Aluminium. Geologisches Jahrbuch, Sonderheft 2 (2000)

Mori G., C. Klippenberger and P. Paschen:
Materials’ flow and energy requirement in copper metallurgy. BHM 145 (2000), 112 – 120

Paschen P.:
Kann eine exzellente universitäre Ausbildung die Eintrittskarte in eine Elite sein?. Österreichische Notariatszeitung 132 (2000) 12, 357 – 359

Roth P., T. Atmaca and G. Mori:
Stoffmengenflüsse und Energiebedarf bei der Gewinnung ausgewählter mineralischer Rohstoffe. Teilstudie Eisen. Geologisches Jahrbuch, Sonderheft 2 (2000)