Nichteisenmetallurgie, Nichteisen, Nichteisenmetalurgie, Metalurgie, Montan, Montanuni, Montanuniversität, Leoben, Metallurgie, Helmut Antrekowitsch, Stefan Pogatscher, Jürgen Antrekowitsch, Stefan Luidold, Stefan Steinlechner, Recyclingtechnik Leoben
Univ.-Prof. Dipl.-Ing. Dr.mont.

Helmut Antrekowitsch

Focus

• Primary metallurgy and recycling of nonferrous metals
• Pyro- and hydrometallurgy of nonferrous metals
• Material science of nonferrous metals

Contact

Education

1982–1987Higher Technical Education Institute (HTL) Leoben / Concentration: Metallurgy
1989–1994Master’s degree program in Metallurgy, University of Leoben, Austria
1994Graduation (M.Sc.)/(Dipl.-Ing.)
1998Conferral of doctorate (Dr. mont.)
2003“venia docendi” (Priv.-Doz.) in the field “Nonferrous Metallurgy”

Professional experience

1988–1989Process engineer, Alusuisse, Salzburger Aluminium GmbH, Lend
1993–1995Study Assistantat Institute of Nonferrous Metallurgy, University of Leoben, Austria
1995–1999University Assistantat Institute of Nonferrous Metallurgy, University of Leoben, Austria
1996–1998Deputy directorat Institute of Nonferrous Metallurgy, University of Leoben, Austria
1999–2002Self-employed in the fields of nonferrous metallurgy and materials science; research assistant
2002–presentHead of Christian Doppler Laboratory for Secondary Metallurgy of Nonferrous Metals
2003–present“venia docendi” (Priv.-Doz.) in the field “Nonferrous Metallurgy”
2004–2010Head of Institute of Nonferrous Metallurgy, University of Leoben, Austria
2010–presentProfessor of Nonferrous Metallurgy, University of Leoben, Austria

Publications

Scheiblehner D., Antrekowitsch H., Neuschitzer D., Wibner S. und Sprung A: Hydrogen Production by Methane Pyrolysis in Molten Cu-Ni-Sn Alloys. Metals, 13 (2023), 1310.

Luznik L., Gerold E., Luidold S., Weirather T., Pachlhofer J, Czettl C., Karhumaa T. und Antrekowitsch H.: Recycling of cemented carbides with gaseous zinc including particular consideration of GGI. EMC proceedings (2023)

Gerold, E., Lerchbammer R., Strnad C. und H. Antrekowitsch: Towards a sustainable approach using mineral or carboxylic acid to recover lithium from lithium iron phosphate batteries. Hydrometallurgy, 222 (2023), 106187.

Gerold E., Lerchbammer R. und H. Antrekowitsch: Evaluation of the Influence Exerted by Increased Silicon Contents on the Leaching Behaviour of NMC-Based Black Mass. Metals, 13 (2023), 785.

Gerold E., Lerchbammer R. und H. Antrekowitsch: SeLiReco 2.0 – A more sustainable process for the recycling of lithium-ion batteries. EMC proceedings (2023).

Tichy S., Pucher P., Prillhofer B., Wibner S. und H. Antrekowitsch: Hydrogen Absorption of Aluminum-Magnesium Melts from Humid Atmospheres. TMS Light Metals (2023), San Diego, USA, 920–927

Tichy S., Pucher P., Prillhofer B., Wibner S. und H. Antrekowitsch: Comparison of experimental methods to investigate the oxidation behaviour of aluminium melts. EMC proceedings (2023).

Gerold E. and H. Antrekowitsch: Interrelationships between pre-processing and subsequent procedures in the recycling of LIBs. Recy&Depo Tech (2022), Leoben, Österreich, online proceeding

Gerold E. and H. Antrekowitsch: A sustainable approach for the recovery of manganese from spent lithium-ion batteries via photocatalytic oxidation. International Journal of Materials Science and Applications (2022), 11, 3, 66–75

Gerold E., C. Schinnerl and H. Antrekowitsch: Critical evaluation of the potential of organic acids for the environmentally friendly recycling of spent lithium-ion batteries. Recycling (2022), 7, 4, 7010004

Gerold E., H. Antrekowitsch and R. Lerchbammer: Parameter study on the recycling of LFP cathode material using hydrometallurgical methods. Metals (2022), 12, 10, 1706

Körbler N., G. Mori, E. Gerold, H. Antrekowitsch, J. Klocek and T. Krivec: Cyclic voltammetric analysis of copper dissolution in acidic chloride electrolytes containing copper ions. Copper Conference (2022), Santiago, Chile, online proceeding

Körbler N., T. Ebner, H. Antrekowitsch, T. Krivec and J. Klocek: Voltammetric investigations regarding the reaction and diffusion rates of copper in aqueous solutions. World of metallurgy – Erzmetall (2022), 75, 5, 251–257

Leitner M., F. Winter, E. Gerold, S. Luidold, C. Storf, C. Czettl, L. Janka, T. Karhumaa and H. Antrekowitsch: Studies on the phase formation of cobalt contacted with zinc vapour (2022), International Journal of refractory metals and hard materials (2022), 107, 9, 105877

Raabe D., D. Ponge, P. Uggowitzer, M. Roscher, M. Paolantonio, C. Liu, H. Antrekowitsch, E. Kozeschnik, D. Seidmann, B. Gault, F. De Geuser, A. Deschamps, C. Hutchinson, C. Liu, Z. Li, P. Prangnell, J. Robson, P. Shanthraj, S. Vakili, C. Sinclair, L. Bourgeois and S. Pogatscher: Making sustainable aluminum by recycling scrap. Progress in material science (2022), 128, 7, 100947

Scheiblehner D., D. Neuschitzer, S. Wibner, A. Sprung and H. Antrekowitsch: Hydrogen production by methane pyrolysis in molten binary copper alloys. International Journal of hydrogen energy (2022), online, Print 2023

Scheiblehner D., H. Antrekowitsch, S. Luidold, C. Sagadin and D. Offenthaler: Investigation of melting behavior and viscosity of slags from secondary ferromanganese production. Furnace tapping (2022), 311–324

Thiel S., E. Thomé-Kozmiensky, D. Senk, H. Wotruba, H. Antrekowitsch and R. Pomberger: Mineralische Nebenprodukte und Abfälle 9: Aschen, Schlacken, Stäube und Baurestmassen. TK Verlag Karl Thomé-Kozmiensky, 2022

Wibner S., D. Neuschitzer, D. Scheiblehner and H. Antrekowitsch: A Brief Insight – Methanpyrolyse im Flüssigmetallreaktor. Insight Energy (2022), 6, 68–70

Wibner S. und H. Antrekowitsch: Recycling von minderwertigen Aluminiumschrotten. BHM Berg- und Hüttenmännische Monatshefte, 2021, Heft 3, 131–136 
Gerold E., Schinnerl C. und H. Antrekowitsch: Critical Evaluation of the Potential of Organic Acids for the Environmentally Friendly Recycling of Spent Lithium-Ion Batteries, Recycling, 2022, 7,4 

Windisch-Kern S, Gerold E, Nigl T, Jandric A, Altendorfer M, Rutrecht B, SWindisch-Kern S, Gerold E, Nigl T, Jandric A, Altendorfer M, Rutrecht B, Scherhaufer S, Raupenstrauch H, Pomberger R, Antrekowitsch H, Part F. Recycling chains for lithium-ion batteries: A critical examination of current challenges, opportunities and process dependencies. Waste Management 2021, 138.2022, 125-139. 

Gerold, E., S. Luidold and H. Antrekowitsch: Separation and Efficient Recovery of Lithium from Spent Lithium-Ion Batteries. Metals, 11 (2021) 1091

Gerold, E., S. Luidold and H. Antrekowitsch: Decomposition of hydrogen peroxide in selected organic acids. Proceedings of European Metallurgical Conference (2021), Salzburg, Österreich (online)

Gerold, E. and H. Antrekowitsch: Potenzialabschätzung von Synergieeffekten zur simultanen Rückgewinnung von Wertmetallen aus komplexen, metallhaltigen Reststoffen. Österreichische Wasser- und Abwasserwirtschaft (2021)

Körbler N., Ebner T., Luidold S., Antrekowitsch H., Klocek J. and T. Krivec: Voltammetric investigations regarding the reaction and diffusion rates of copper in aqueous solutions. European Metallurgical Conference (2021)

Woschank M., B. J. Ralph, A. Kaiblinger, P. Miklautsch, C. Pacher, M. Sorger, H. Zsifkovits, M. Stockinger, S. Pogatscher, T. Antretter and H. Antrekowitsch: MUL 4.0–Digitalisierung der Wertschöpfungskette vom Rohmaterial bis hin zum Recycling. Berg-und Hüttenmännische Monatshefte, (2021), 1-5.

Wibner S. and H. Antrekowitsch: Recycling of aluminium-containing residues. Proceedings of European Metallurgical Conference (2021), Salzburg, Österreich. (online)

Aradi E., M. A. Tunes, J. Lewis-Fell, G. Greaves, H. Antrekowitsch, S. Pogatscher, S. E. Donnelly and J. A. Hinks: Radiation Damage Suppression in AISI-316 Steel Nanoparticles: Implications for the Design of Future Nuclear Materials. ACS Applied Nano Materials 3(10) (2020), 9652–9662

Wibner S. and H. Antrekowitsch: Recycling von Al-Schrotten mit hohem Organikanteil, Recy & DepoTech (2020), Leoben, Austria, 113–118

Gerold E., Luidold S. und H. Antrekowitsch: Optimization of a leaching process for pulverized metal-containing residues. Sustainable industrial processing Summit and exhibition, 2020, 65-72

Gerold E., Luidold S., Honner M., Antrekowitsch H. und A. Arnberger: Development of a Hydrometallurgical Recycling Concept for Metal-containing Residues from the Battery Sector. Word of Metallurgy – Erzmetall 73 (4), 2020, 181-188

Gerold E., Luidold S., Bartelme C. und H. Antrekowitsch: Pyrometallurgische Aufarbeitung von Zwischenprodukten beim Batterierecycling. Recycling- und Sekundärrohstoffe Band 13, 2020, 558-567

Gerold E., Luidoild S. und H. Antrekowitsch: Selective Precipitation of Metal Oxalates from Lithium Ion Battery Leach Solutions. Metals 10 (1435), 2020

Wibner S. and H. Antrekowitsch: Comparison of two dross press systems in the aluminum recycling industry. Proceedings of SIPS (2019), Vol. 4, Paphos, Zypern, 109–117.

Wibner S., H. Antrekowtisch and B. Falkensammer: Representative Sampling, Fractionation and Melting of Al-Scrap. TMS Light Metals (2020), San Diego, USA, 1083–1090.

Thomé-Kozmiensky E., H. Antrekowitsch, G. Deiter, R. Pomberger, S. Thiel und H. Wotruba: Mineralische Nebenprodukte und Abfälle 7: Aschen, Schlacken, Stäube und Baurestmassen. TK Verlag Karl Thomé-Kozmiensky (2020)

Pfandl K., H. Antrekowitsch, D. Höllen, J. Holzer, B. Küppers, R. Pomberger, S. Scheiber and G. Stockinger: X-ray fluorescence sorting of non-ferrous metal fractions from municipal solid waste incineration bottom ash processing depending on particle surface properties. Waste management & research (2020), 111 – 121

Körbler N., T. Ebner, S. Luidold, H. Antrekowitsch, C. Czettl, C. Storf, A. Clarke und K. Clarke: Layer growth in Co(W)-Zn systems at hard metal recycling. JOM – The Journal of the minerals, metals & materials society (2019, Vol. 72 (2), pp 847-853.

Gerold E., S. Luidold, M. Honner and H. Antrekowitsch: Leaching of metal-containing residues from the battery sector. World of Metallurgy – Erzmetall 72 (5), 2019, 267-273

Pfandl K., B. Küppers, S. Scheiber, G. Stockinger, J. Holzer, R. Pomberger, H. Antrekowitsch and D. Höllen: XRF Sorting of Non-Ferrous Metal Fraction form MSWI Bottom Ash Processing Depending on Particle Surface Properties. Waste Management und Research, 2019

Wibner S. and H. Antrekowitsch: Recycling of aluminium with variation of the scrap processing techniques. Proceedings of European Metallurgical Conference (2019), Düsseldorf, Germany, 1151– 1161

Ebner T., S. Luidold, M. Honner, H. Antrekowitsch and C. Czettl: Conditioning of Spent Stripping Solution for the Recovery of Metals. Metals 8 (2018), 757

Scheiber S. and H. Antrekowitsch: Effects of zinc addition on microstructure of SnCu3.5Ni0.3 alloy. Conference Proceedings of International Students’ Day of Metallurgy (2018), Freiberg, Deutschland, 181–188

Zöhrer M. and H. Antrekowitsch: Konditionierung und Recycling aluminiumhaltiger Reststoffe minderer Qualität. Umweltschutz, 02/2017, 14–17

Scheiber S. and H. Antrekowitsch: Investigation of phase formation in tin alloys. Proceedings of European Metallurgical Conference (2017), Leipzig, Deutschland, 377–387

Ebner, T., S. Luidold, H. Antrekowitsch, C. Storf and C. Czettl: Phase formation in Co(Ru)-Zn diffusion couples. Proceeding 19th Plansee Seminar 2017, Reutte, Österreich, RC11

Kolb Gernot K.-H., H. Antrekowitsch, D. Pöschmann, P. J. Uggowitzer and S. Pogatscher: Effect of Interrupted Quenching on Al-Zn-Mg-Cu alloys. Light Metals 2017, 385–389

Stuhlpfarrer P., S. Luidold, H. Schnideritsch and H. Antrekowitsch: New preparation and recycling procedure to recover rare earth elements from magnets by using a closed loop treatment. Mineral Processing and Extractive Metallurgy, Trans. Inst. Min. Metall. C, Vol. 125, No. 4, 2016, 204–210

Zöhrer M., H. Antrekowitsch and F. Duspiva: Konditionierung und Recycling aluminiumhaltiger Reststoffe minderer Qualität. Recy & DepoTech (2016), Leoben, Österreich, 129–134

Werinos M., H. Antrekowitsch, T. Ebner, R. Prillhofer, W.A. Curtin and P.J. Uggowitzer, S. Pogatscher: Design strategy for controlled natural aging in Al-Mg-Si alloys. Acta Materialia 118 (2016), 296–305

Kolb G. K.-H. , S. Scheiber, H. Antrekowitsch, P. J. Uggowitzer, D. Pöschmann and S. Pogatscher: Differential Scanning Calorimetry and Thermodynamic Predictions—A Comparative Study of Al-Zn-Mg-Cu Alloys. Metals 6(8) (2016), 180–193

Werinos M., H. Antrekowitsch, T. Ebner, R. Prillhofer, P.J. Uggowitzer and S. Pogatscher: Hardening of Al–Mg–Si alloys: Effect of trace elements and prolonged natural aging. Materials & Design 06 (2016)

Schlögl C. and H. Antrekowitsch: Impact of different alloying additives and pre-treatments on the anodising behaviour of AA2007. Surface and Interface Analysis (2016)

Poscher, A., S. Luidold, H. Schnideritsch and H. Antrekowitsch: Extraction of lanthanides from spent polishing agent. Rare Earth Industry: Technological, Economic, and Environmental Implications (2016) 209–222

Stuhlpfarrer P., S. Luidold und H. Antrekowitsch: Recycling of waste printed circuit boards with simultaneous enrichment of special metals by using alkaline melts: A green and strategically advantageous solution. Journal of Hazardous Materials 307 (2016), 17–25

Werinos M.,  Antrekowitsch H., Kozeschnik E., Ebner T., Moszner F., Löffler J. F., Uggowitzer P. J. und S. Pogatscher: Ultrafast artificial aging of Al–Mg–Si alloys. Scripta Materialia 112 (2015), 148–151

Antrekowitsch H, S. Luidold, J. Antrekowitsch, S. Pogatscher, S. Steinlechner: Aktuelle Entwicklungstrends und zukünftige Herausforderungen im Bereich der Nichteisenmetallurgie. Berg- und Hüttenmännische Monatshefte: BHM (2015) 1–6

Angerer T., S. Hofer und H. Antrekowitsch: Neue Generation bleifreier Kuper-Zink-Legierungen auf Kupfer-Silizium-Mangan-Basis. Metall 69 (2015) No. 11, 431–435

Stuhlpfarrer P., S. Luidold und H. Antrekowitsch: Recycling of Nd2Fe14B Magnets. World of Metallurgy – Erzmetall, 68, 2015, 278–285

Schlögl C. und H. Antrekowitsch: Anodising of Recycling Aluminium. World of Metallurgy – Erzmetall, 68, 2015, 299–306

Werinos M., H. Antrekowitsch, W. Fragner, T. Ebner, P. Uggowitzer und S. Pogatscher: Influence of Alloy Production History on Natural Aging of AA6061 Modified with Sn. Proc. of EMC 1 (2015), Düsseldorf, Deutschland, 303–310

Stuhlpfarrer P., S. Luidold und H. Antrekowitsch: Optimierung der pyrolytischen Vorbehandlung von Leiterplattenschrotten unter besonderer Betrachtung der Bromgewinnung. Recycling und Rohstoffe, Band 8, Recycling- und Rohstoffkonferenz, Berlin, Deutschland, 2015, 325-344

Hofer S., T. Angerer und H. Antrekowitsch: Werkstoffentwicklung bleifreier Messinglegierungen (Teil 1/3). Metall 69 (2015) No. 3, 82–87

Antrekowitsch H., C. Pichler und R. Rumpold: New development in metal recovery from secondary resources. 4th Slag Valorisation Symposium Zero Waste, Leuven, Belgien, 15–17.04.2015

Zöhrer M., T. Angerer, H. Antrekowitsch und A. Kügele: Recycling von Produktionsrückständen aus der metallverarbeitenden Industrie. Recycling und Rohstoffe, Band 8, Recycling- und Rohstoffkonferenz, Berlin, Deutschland, 2015, 271–384

Pirker A., H. Antrekowitsch, M. Kettner, W. Fragner und H. Suppan: Recycling of aluminium scrap via salt process. Proc. of EMC 1 (2015), Düsseldorf, Deutschland, 343–357

Pirker A., H. Antrekowitsch, W. Fragner, H. Suppan und M. Kettner: Optimization of the Al-recycling Process for Low Grade Scrap. BHM Berg- und Hüttenmännische Monatshefte 160. Jg., 2015, 320–327

Hutabarat I., H. Schnideritsch, A. Poscher, C. Sobotka und H. Antrekowitsch: Characterisation and Thermal Behavior of Indonesian Copper Sulphides for Leaching Process. Proc. of EMC 1 (2015), Düsseldorf, Deutschland, 171–188

Angerer T., S. Hofer und H. Antrekowitsch: Development of a lead-free brass alloy. Proc. of EMC 1 (2015), Düsseldorf, Deutschland, 221–230

Kremmer T., H. Antrekowitsch, G. Mori, P. Oberhauser und G. Hanko: Impact of microstructural characteristics on the corrosion morphology of high strength brazing sheets. Proc. of EMC 1 (2015), Düsseldorf, Deutschland, 277–287

Ebner T., G. Kücher, S. Luidold, H. Schnideritsch, C. Czettl, C. Storf und H. Antrekowitsch: Reuse of metal cutting tools by wet chemical decoating. Proc. of EMC 2 (2015), Düsseldorf, Deutschland, 725–738

Benedek L., S. Luidold und H. Antrekowitsch: Challenges regarding recycling of REEs from permanent magnets in a WEEE-fraction. Proc. of EMC 2 (2015), Düsseldorf, Deutschland, 785–797

Sorger C., P. Stuhlpfarrer, S. Luidold und H. Antrekowitsch: Effects of pyrolysis on the metallurgical processing of waste electrical and electronic equipment. Proc. of EMC 2 (2015), Düsseldorf, Deutschland, 819–831

Zöhrer M., T. Angerer, H. Antrekowitsch und F. Duspiva: Treatment of industrial waste. Proc. of EMC 2 (2015), Düsseldorf, Deutschland, 833–844

Stuhlpfarrer P., S. Luidold und H. Antrekowitsch: Recycling of Nd2Fe14B-Magnets. Proc. of EMC 2 (2015), Düsseldorf, Deutschland, 925–938

Hofer S., T. Angerer und H. Antrekowitsch: Werkstoffentwicklung bleifreier Messinglegierungen (Teil 2/3). Metall 69 (2015), No. 6, 240–244

Werinos M., H. Antrekowitsch, W. Fragner, T. Ebner, P. Uggowitzer und S. Pogatscher: Influence of temperature on natural aging kinetics of AA6061 modified with Sn. TMS Light Metals 2015 (2015) , Orlando, USA, 367–371

Pogatscher S., H. Antrekowitsch, M. Werinos, G. Rank, A. Kaiß, R. Prillhofer, J. Löffler und P. Uggowitzer: Statistical and Thermodynamic Optimization of Trace-Element Modified Al-Mg-Si-Cu Alloys. TMS Light Metals (2015), Orlando, USA, 265–270

Koch S., M. Abad, S. Renhart, H. Antrekowitsch und P. Hosemann: A high temperature nanoindentation study of Al-Cu wrought alloy. Materials Science and Engineering A (2015), Volume 644, 218–224

Keppert T., G. Luckeneder, K. H. Stellnberger, C. Commenda, G. Mori and H. Antrekowitsch. Materials and Corrosion (2014), Volume 65, 871-880

Benedek, L., S. Luidold und H. Antrekowitsch: Recyclingkonzepte for Photovoltaikmodule. DepoTech, Leoben (2014) 283-288

Stuhlpfarrer P., S. Luidold und H. Antrekowitsch: Recyclingkonzepte zur Rückgewinnung von Massen- und Technologiemetallen aus E-Schrotten der Kategorie 3. World of metallurgy – Erzmetall 67 (2014) No. 1, 28-37

Poscher, A., S. Luidold, H. Schnideritsch und H. Antrekowitsch: Extraction of lanthanides from spent polishing agent. 1st European Rare Earth Resources Conference, Milos, Griechenland (2014)

Luidold S. und H. Antrekowitsch: Recovery of metals from different secondary resources (waste). Handbook of recycling: state-of-the-art for practitioners, analysts, and scientists, Amsterdam, Niederlande: Elsevier (2014), 255-268

Poscher A., S. Luidold, H. Schnideritsch und H. Antrekowitsch: Recycling von Seltenen Erden sowie Antimon aus Reststoffen. Forum für Metallurgie und Werkststofftechnik, Onlinetagungsunterlagen (2014), Leoben, Österreich

Sorger C., P. Stuhlpfarrer, S. Luidold und H. Antrekowitsch: Auswirkungen der Pyrolyse von Elektronikschrotten auf die metallurgische Weiterverarbeitung. Forum für Metallurgie und Werkststofftechnik, Onlinetagungsunterlagen (2014), Leoben, Österreich

Pogatscher S., M. Werinos, H. Antrekowitsch und P. Uggowitzer: The role of vacancies in the aging of Al-Mg-Si alloys. Materials Science Forum (2014), 1008 – 1013

Prillhofer R., J. Berneder, G. Rank, H. Antrekowitsch, S. Pogatscher und P. Uggowitzer: Influence of chemical composition and process parameters on mechanical properties and formability of AIMgSi-sheets for automotive application. TMS Light Metals (2014), San Diego, USA, 227 – 232

Benedek L., S. Luidold, H. Schnideritsch und H. Antrekowitsch: Recyclingkonzepte für Photovoltaikmodule. Recycling und Rohstoffe, Band 7, Recycling- und Rohstoffkonferenz, Berlin, Deutschland, 2014, S. 231-250

Sorger C., P. Stuhlpfarrer, S. Luidold und H. Antrekowitsch: Auswirkungen der Pyrolyse von Elektronikschrotten auf die metallurgische Weiterverarbeitung. BHM Berg- und Hüttenmännische Monatshefte Band 159 (7), 306-307

Keppert T.A., G. Luckeneder, K.-H. Stellnberger, C. Commenda, G. Mori and H. Antrekowitsch: The effect of magnesium on the corrosion of hot-dip galvanized steel in chloride containing environments. Materials and Corrosion, 65, No. 9, 2014, 871–880

Keppert T., G. Luckeneder, K. Stelnberger, G. Mori und H. Antrekowitsch: The effect of sulphate, phosphate, nitrate and acetate on the corrosion behaviour of Zn-Al-Mg hot-dip galvanised steel. Materials and Corrosion 2014, 65, No. 6, 560-568

Kremmer T., H. Antrekowitsch, G. Mori, G. Hanko, P. Oberhauser und A. Hajek: High strength brazing sheet with improved corrosion resistance. Aluminium Brazing 8th International Congress, Düsseldorf, Deutschland, 2014, 67-74

Stuhlpfarrer P., H. Schnideritsch, S. Luidold und H. Antrekowitsch: Recovery Of Technology Metals From A WEEE-fraction. Proc. of Shechtman International Symposium 2014, Cancun, Mexico, 2014

Pogatscher S., H. Antrekowitsch, M. Werinos, F. Moszner, S. Gerstl, M. Francis, W. Curtin und P. Uggowitzer: Diffusion on Demand to Control Precipitation Aging: Application to Al-Mg-Si Alloys. Phys. Rev. Lett. 112 (2014), 225701–225705

Pogatscher S., E. Kozeschnik, H. Antrekowitsch, M. Werinos, S. Gerstl, J. Löffler und P. Uggowitzer: Process-controlled suppression of natural aging in an Al-Mg-Si alloy. Scripta Materialia 89 (2014), 53–56

Schlögl C., S. Koch und H. Antrekowitsch: Optimierung der Anodisierbarkeit bei Aluminiumlegierungen. BHM (2013) Vol. 158 (3): 97-103

Antrekowitsch H., H. Paulitsch und A. Pirker: Einsatz minderwertiger Schrotte und Reststoffsituation beim Recycling von Aluminium. Recycling und Rohstoffe, Band 6, Recycling- und Rohstoffkonferenz, Berlin, Deutschland, 2013, S. 433-453

Poscher, A., S. Luidold und H. Antrekowitsch: Processing of rare earth containing residues. REMat, Wroclaw, Polen (2013)

Stuhlpfarrer P., S. Luidold und H. Antrekowitsch: Erhöhung der Verwertungsquoten beim Recycling von Elektronikschrott. BHM Berg- und Hüttenmännische Monatshefte (2013) Band 158 (3), 85-90

Luidold S., A. Poscher, P. Stuhlpfarrer und H. Antrekowitsch: Wirtschaftsstrategische Rohstoffe für die Hochtechnologie in Europa. BHM Berg- und Hüttenmännische Monatshefte (2013) Band 158 (3), 70-77

Luidold S., T. Angerer, H. Antrekowitsch, M. Kaindl, A. Poscher, P. Stuhlpfarrer und d. weitere: Kritische Rohstoffe für die Hochtechnologieanwendung in Österreich. Bundesministerium für Verkehr, Innovation und Technologie, Abteilung für Energie- und Umwelttechnologien. Wien, Österreich (Berichte aus Energie- und Umweltforschung, 11/2013), Internet: http://www.nachhaltigwirtschaften.at/e2050/results.html/id6903

Pogatscher S., H. Antrekowitsch und P. Uggowitzer: Influence of starting temperature on differential scanning calorimetry measurements of an Al-Mg-Si alloy. Materials Letters (2013), S 163-165

Pogatscher S., H. Antrekowitsch, H. Leitner, A. Sologubenko und P. Uggowitzer: Influence of the thermal route on the peak-aged microstructures in an Al-Mg-Si aluminum alloy. Scripta Materialia 68 (2013), 158 – 161

Stuhlpfarrer P., S. Luidold und H. Antrekowitsch: Recycling Potential of Special Metals like Indium, Gallium and Germanium. Proc. of EMC 3 (2013), Weimar, Deutschland, 1249 – 1262

Poscher A., S. Luidold, M. Kaindl und H. Antrekowitsch: Recycling of Rare Earths from Spent Phosphors. Proc. of EMC 3 (2013), Weimar, Deutschland, 1217 – 1222

Antrekowitsch H., S. Luidold und d. weitere: Metal Recycling: Opportunities, Limits, Infrastructure. UNEP (2013) Metal Recycling: Opportunities, Limits, Infrastructure, A Report of the Working Group on the Global Metal Flows to the International Resource Panel

Angerer T., S. Luidold und H. Antrekowitsch: Recycling potentials of the two refractory metals tantalum and niobium. Proc. of EMC 3 (2013), Weimar, Deutschland, 1069-1084

Luidold S., A. Poscher und H. Antrekowitsch: Recovery of rare earths from residues of the glass industry by hydrochloric acid leaching. Proc. of EMC 3 (2013), Weimar, Deutschland, 1185 – 1190

Pirker A., H. Antrekowitsch, M. Kettner, W. Fragner und H. Suppan: Recycling of Aluminium Scrap with Organic Load. Proc. of EMC 3 (2013), Weimar, Deutschland, 1207-1215

Antrekowitsch H., H. Paulitsch und A. Pirker: Reststoffe aus der Aluminium-Sekundärindustrie. Proceedings der Berliner Schlackenkonferenz, Berlin, Deutschland, 2013, 615-638

Kaindl M., A. Poscher, S. Luidold und H. Antrekowitsch: Investigation on different recycling concepts for rare earth containing magnets. Proc. of EMC 3 (2013), Weimar, Deutschland, 1151 – 1165

Poscher A., S. Luidold und H. Antrekowitsch: Extraction of Cerium and Lanthanum from Spent Glass Polishing Agent. Proceedings of Materials Science & Technology (2013), Montréal, Kanada, 543-552

Sobotka C. und H. Antrekowitsch: Investigation of the Scale Formation of a Chromium and Molybdenum containing Steel Alloy in an Oxipyr®-oxyfuel combusted Reheat Furnace. Proceedings of European Metallurgical Conference EMC 2013, Volume 1, S:415-426

Schlögl C. und H. Antrekowitsch: Influence of impurities in secondary aluminium on machinability and anodising behaviour. Proc. of EMC 3 (2013), Weimar, Deutschland

Stuhlpfarrer P., S. Luidold und H. Antrekowitsch: Recyclingkonzepte zur Rückgewinnung von Massen- und Technologiemetallen aus E-Schrotten der Kategorie 3. Heft 133 der Schriftenreihe der GDMB, 46. Metallurgisches Seminar der GDMB, Herstellung und Recycling von Technologiemetallen (2013), Joachimsthal, Deutschland, 19-36

Poscher A., S. Luidold und H. Antrekowitsch: Rückgewinnung von Antimon aus einem metallischen Reststoff. Heft 133 der Schriftenreihe der GDMB, 46. Metallurgisches Seminar der GDMB, Herstellung und Recycling von Technologiemetallen (2013), Joachimsthal, Deutschland, 113-127

Schlögl C., P. Stuhlpfarrer, S. Luidold und H. Antrekowitsch: Datenschrott. Recycling Magazin, Ausgabe 24, (2013), 28-31

Antrekowitsch H.: Recycling und Sekundärlegierungsentwicklung von Aluminium. Festschrift zur Emeritierung, 101-115, 2013

Antrekowitsch H. und B. Prillhofer: Stranggießen von Aluminium. Handbuch Urformen, 341-347, 2013

Pogatscher S., H. Antrekowitsch und P. Uggowitzer: Interdependent Effect of Chemical Composition and Thermal History on Artificial Aging of AA6061. Acta materialia 60 (2012) , S. 5545 – 5554

Stadler F., H. Antrekowitsch, W. Fragner, H. Kaufmann und P. Uggowitzer: Effect of main alloying elements on strength of Al–Si foundry alloys at elevated temperatures. International Journal of Cast Metals Research,2012, Vol. 25, No. 4, 215 – 224

Angerer T., S. Luidold, H. Schnideritsch und H. Antrekowitsch: RFID-Reststoff-Anfall und Recyclingpotenziale der Metallanteile. BHM, 157. Jg. (2012), Heft 1, 14 – 19

Stadler F., H. Antrekowitsch, W. Fragner, H. Kaufmann und P. Uggowitzer: Mechanische Eigenschaften von AlSiCu3(Fe) und AlSi12CuNiMgmod bei erhöhten Temperaturen. Giesserei 03 (2012), 38 – 46

Stadler F., H. Antrekowitsch, W. Fragner, H. Kaufmann und P. Uggowitzer: The influence of solution treatment on the high-temperature strength of Al-Si foundry alloys with Ni. Proc. Light Metals TMS (2012), Orlando, USA, 431 – 434

Schnideritsch H., S. Luidold, T. Angerer und H. Antrekowitsch: Problematik der Aufbereitung von RFIDs. Recycling und Rohstoffe, Band 5 (2012), 625 – 636

Pogatscher S., H. Antrekowitsch, T. Ebner und P. Uggowitzer: The Role of Co-Clusters in the Artificial Aging of AA6061 and AA6060. Proc. Light Metals TMS (2012), Orlando, USA, 415 – 420

Luidold S. und H. Antrekowitsch: Recovery of rare earth metals from waste material by leaching in non-oxidizing acid and by precipitating using sulphates. EP 2444507

Luidold S., T. Angerer und H. Antrekowitsch: Recovery of tungsten from waste material by ammonium leaching. EP245031203.11.10

Stadler F., H. Antrekowitsch, W. Fragner, H. Kaufmann und P. Uggowitzer: The effect of Nickel on the thermal conductivity of Al-Si foundry alloys. 13th International Conference on Aluminum Alloys (ICAA13) , TMS (The Minerals, Metals & Materials Society), 2012, 137 – 142

Pogatscher S., H. Antrekowitsch, H. Leitner, D. Pöschmann, Z. Zhang und P. Uggowitzer: Influence of interrupted quenching on artificial aging of Al–Mg–Si alloys. Acta Materialia 60 (2012), 4496 – 4505

Luidold S., A. Poscher und H. Antrekowitsch: Concepts for the extraction of rare earths from spent phosphors. Proceedings of the 51st Annual Conference of Metallurgists of CIM (COM 2012) in: Rare earths 2012 (2012), S. 435 – 446, Niagara, ON, Kanada ; 2012

Stadler F., H. Antrekowitsch, W. Fragner, H. Kaufmann, E. Pinatel und P. Uggowitzer: The effect of main alloying elements on the physical properties of Al-Si foundry alloys. Materials Science & Engineering A, (2012)

Poscher A., S. Luidold und H. Antrekowitsch: Konzepte zur Gewinnung von Seltenen Erden aus Leuchtstoffen. Tagungsband zur 11. DepoTech-Konferenz (2012), Leoben, Österreich, 373 – 378

Antrekowitsch H.: Zukünftige Herausforderungen beim Recycling von Aluminium. Proceeding der 7. Ranshofener Leichtmetalltage, Energieeeffiziente Mobilität, (2012), Gmunden, Österreich, 224 – 237

Visser A., S. Koch und H. Antrekowitsch: Einsatz von Diamantschneidplatten bei der CNC-Bearbeitung von Al- und Cu-Legierungen. BHM 157 (2012) 1, 461 – 465

Angerer T., S. Luidold und H. Antrekowitsch: Technologien zum Recycling von Hartmetallschrotten (Teil 2). World of metallurgy – Erzmetall 64 (2011) No. 2, 62 – 70

Angerer T., S. Luidold und H. Antrekowitsch: Technologien zum Recycling von Hartmetallschrotten (Teil 1). World of metallurgy – Erzmetall 64 (2011) No. 1, 5 – 14

Koch S. und H. Antrekowitsch: Alloying behaviour of Cu, Mg and Mn in lead-free Al-Cu based alloys intended for free machining. BHM, 156. Jg. (2011), Heft 1, 22 – 27

Luidold S., H. Schnideritsch und H. Antrekowitsch: Schmelzmetallurgische Beurteilung von nichteisenmetallhältigen Schlacken. BHM, 156. Jg. (2011), Heft 1, 1 – 5

Paulitsch H., H. Antrekowitsch und A. Schmid: Vergleich des Abbrandverhaltens beim Rezyklieren von Aluminiumspänen und -briketts. BHM, 156. Jg. (2011), Heft 1, 6 – 13

Koch S. und H. Antrekowitsch: Investigations of lead-free aluminium alloys for machining. World of metallurgy – Erzmetall 64 (2011) No. 1, 26 – 30

Luidold S. und H. Antrekowitsch: Lithium – Natural Resources, Application, and Recycling. Light Metal Age 69 (2011) No. 1, 50 – 55

Pirker A., H. Paulitsch, S. Luidold, H. Antrekowitsch und T. Prietl: Erzeugung von synthetischer Titanschlacke aus Ilmenit inklusive Marktstudie. Proc. of 18th International Student’s Day of Metallurgy (2011), Leoben, Österreich, 255 – 264

Poscher A., S. Luidold und H. Antrekowitsch: Aufbereitung von Nickelmetallhydridakkus zur Wiedergewinnung Seltener Erden. Proc. of 18th International Student’s Day of Metallurgy (2011), Leoben, Österreich, 419 – 426

Pogatscher S., H. Antrekowitsch, H. Leitner, T. Ebner und P. Uggowitzer: Mechanisms controlling the artificial aging of Al-Mg-Si Alloys. Acta Materialia 59 (2011), 3352 – 3363

Pichler C., C. Stock, P. Pucher und H. Antrekowitsch: Optimierung eines Al-Drehspaltkeiles. Proc. of 18th International Student’s Day of Metallurgy (2011), Leoben, Österreich, 248 – 254

Stadler F., H. Antrekowitsch, W. Fragner, H. Kaufmann und P. Uggowitzer: The effect of Ni on the high-temperature strength of Al-Si cast alloys. Materials Science Forum 690 (2011), 274 – 277

Angerer T., S. Luidold und H. Antrekowitsch: Development of a new process for tungsten soft scrap recycling. Proc. of EMC 2 (2011), Düsseldorf, Deutschland, 549 – 563

Hoy C., S. Luidold und H. Antrekowitsch: Recycling of Secondary Materials for the Production of Ferroalloys. Proc. of EMC 4 (2011), Düsseldorf, Deutschland, 1375 – 1390

Kaindl M., S. Luidold und H. Antrekowitsch: Extraction of Rare Earths from Used Nickel Metal Hydride Batteries. Proc. of EMC 4 (2011), Düsseldorf, Deutschland, 1401 – 1415

Stadler F., H. Antrekowitsch, W. Fragner, H. Kaufmann und P. Uggowitzer: Der Einfluss von Nickel auf die Warmfestigkeit von AlSi-Gusslegierungen. Giesserei 08 (2011), 22 – 27

Luidold S. und H. Antrekowitsch: Red Mud – Hazardous Waste or Valuable Raw Material?. Proc. of EMC 3 (2011), Düsseldorf, Deutschland, 853 – 864

Schnideritsch H., H. Antrekowitsch, S. Luidold und C. Wagner: Investigation of the Quasi-Ternary-System Fe2O3-Cr2O3-ZnO and its Influencing Parameters. Proc. of EMC 4 (2011), Düsseldorf, Deutschland, 1249 – 1262

Koch S. und H. Antrekowitsch: Effect of Ti or Zr additions on material characteristics of new lead-free Al-Cu-Mg-Sn alloys for machining purposes . Proc. of European Metallurgical Conference EMC (2011), Düsseldorf, Deutschland, 1161-1170

Pogatscher S., S. Koch und H. Antrekowitsch: Development of a coating process for copper strips with appropriate lead-free solders. Proc. of EMC 1 (2011), Düsseldorf, Deutschland, 123 – 136

Antrekowitsch H., S. Koch, H. Paulitsch, S. Pogatscher, P. Pucher, F. Stadler und C. Wagner: Recycling und Werkstoffentwicklung von Aluminium. Berg- und hüttenmännische Monatshefte: BHM 156 (2011) 7, 287 – 294

Brisberger R., H. Antrekowitsch und H. Vasold: Zn-Al-Mg alloy coatings in the production process of Wuppermann. Proc. of 3rd Seminar on Networking between Zinc and Steel (2011), Leoben, Österreich, 111 – 128

Brisberger R. und H. Antrekowitsch: Erzeugung längsnahtgeschweißter und feuerverzinkter Rohre bei Wuppermann in Judenburg. Proc. of XXX. Verformungskundliches Kolloquium (2011), Planneralm, Österreich, 119 – 123

Brisberger R., H. Antrekowitsch, H. Vasold, M. Wießner und B. Sartory: Zn-Al-Mg alloy coatings in the production process of Wuppermann. Proc. of EMC 3 (2011), Düsseldorf, Deutschland, 775 – 791

Angerer T., S. Luidold und H. Antrekowitsch: Optimized roasting for an improved soft scrap recycling. Proc. of the International Conference on Tungsten, Refractory & Hard Materials VIII, Vol. 2 (2011), San Francisco, USA, 58 – 68

Luidold S. und H. Antrekowitsch: Vörösiszap – veszélyes hulladék, vagy értékes nyersanyag?. Kohászat 144 (2011), 34 – 39

Angerer T., S. Luidold und H. Antrekowitsch: Technologien zum Recycling von Hartmetallschrotten (Teil 3). World of metallurgy – Erzmetall 64 (2011) No. 6, 328 – 336

Koch S. und H. Antrekowitsch: Auswirkungen von Elementgehaltsvariationen in Al-Knetlegierungen hinsichtlich Aushärtbarkeit, Eloxierbarkeit und Zerspanbarkeit am Beispiel von neuen bleifreien Al-Cu-Automatenlegierungen. BHM, 156. Jg. (2011), Heft 11, 441 – 447

Wagner C., H. Antrekowitsch und H. Schnideritsch: Reaktionsverhalten von Aluminium bei der Desoxidation in Abhängigkeit von Form und Herstellungsverfahren. Stahl und Eisen 130, (2010) Heft 1, 39 – 45

Ressel R., S. Luidold und H. Antrekowitsch: Die Ferromolybdänherstellung unter besonderer Berücksichtigung der Schlackenmetallurgie. Heft 121 der Schriftenreihe der GDMB Gesellschaft für Bergbau, Metallurgie, Rohstoff- und Umwelttechnik des 44. Metallurgischen Seminars, Sondermetalle und Edelmetalle (2010), Hanau, Deutschland, 87 – 102

Luidold S. und H. Antrekowitsch: Lithium – Rohstoffquellen, Anwendung und Recycling. Heft 121 der Schriftenreihe der GDMB Gesellschaft für Bergbau, Metallurgie, Rohstoff- und Umwelttechnik des 44. Metallurgischen Seminars, Sondermetalle und Edelmetalle (2010), Hanau, Deutschland, 71 – 86

Wagner C., H. Antrekowitsch und H. Schnideritsch: Comparing and Evaluating Smelted and Mechanically Produced Deoxidation Aluminium with Regard to Minimising the Oxygen Content of Molten Steel. World of Metallurgy – Erzmetall 63 (2010), No. 1, 6 – 12

Luidold S. und H. Antrekowitsch: Lithium – Rohstoffquellen, Anwendung und Recycling. World of metallurgy – Erzmetall 63 (2010) No. 2, 68 – 76

Konetschnik S., H. Paulitsch, J. Pesl und H. Antrekowitsch: Recovery of Valuable Metals from Converter Slags by Reduction with Iron. Proc. of Copper (2010), Hamburg, Deutschland, 863 – 877

Wagner C., S. Luidold, H. Antrekowitsch und K. Rimmer: Application of New Gas-Atomization System for Alloys and Chalcogenides. Proc. of the 2010 International Conference on Powder Metallurgy & Particulate Materials (2010), Ft. Lauderdale, USA, Part 2, 19 – 33

Lorber K. und H. Antrekowitsch: Treatment and Disposal of Residues from Aluminium Dross Recovery. Proceedings of CRETE 2010. 2nd International Converence on Hazardous and Industrial Waste Management (2010), Kreta, Griechenland

Koch S. und H. Antrekowitsch: Effects of varied Sn and Cu content in lead-free Al-Cu based alloys intended for free machining. Proc. of 49th Annual Conference of Metallurgists (COM 2010), Vancouver, Kanada, 289 – 298

Luidold S. und H. Antrekowitsch: Rückgewinnung von Seltenen Erden aus Nickelmetallhydrid-Akkumulatoren. Proc. of DepoTech (2010), Leoben, Österreich, 301 – 306

Pucher P., H. Antrekowitsch, H. Böttcher, H. Kaufmann und P. Uggowitzer: Influence of compositional variations on microstructural evolution, mechanical properties and fluidity of the secondary foundry alloy AlSi9Cu3. International Journal of Cast Metals Research 23 (2010), 375 – 383

Pucher P., H. Antrekowitsch, H. Böttcher, H. Kaufmann und P. Uggowitzer: Computerunterstützte Vorhersage Mechanischer Kennwerte von A226. Giesserei 11 (2010), 42 – 49

Prillhofer R., B. Prillhofer und H. Antrekowitsch: Treatment of residues during aluminium recycling. EPD Congress 2009 (The Minerals, Metals & Materials Society), San Francisco, USA, 2009, 857 – 862

Wagner C., S. Luidold, H. Antrekowitsch und K. Rimmer: Verfahrenskonzepte zur Herstellung von Zinnsulfid. BHM, 154. Jg. (2009), Heft 3, 101 – 106

Antrekowitsch H., H. Schnideritsch und S. Konetschnik: Metallurgisches Recycling von metallhaltigen Reststoffen und Schrotten – eine verfahrenstechnische und rohstoffpolitische Herausforderung. Recycling und Rohstoffe, Band 2 (2009), 309 – 325

Ressel R., S. Luidold und H. Antrekowitsch: Oxidation and Reduction Behaviour of Vanadium Containing Slag. World of Metallurgy – Erzmetall (2009), 164 – 170

Pucher P., H. Böttcher, H. Kaufmann, H. Antrekowitsch und P. Uggowitzer: Einfluss der Legierungszusammensetzung auf die mechanischen Eigenschaften und das Fließvermögen der Sekundärlegierung A226 (AlSi9Cu3). Giessereipraxis (2009), Nr. 3, 71 – 78

Pucher P., H. Böttcher, H. Kaufmann, H. Antrekowitsch und P. Uggowitzer: Effect of compositional variations on the mechanical and fluidity performance of the aluminum cast alloy AlSi9Cu3. Proc. of 1st World PhD Foundry Conference (2009), Brünn, Tschechien

Hacksteiner M., H. Antrekowitsch, M. Köffler, G. Wagner und H. Okorn-Schmidt: Nucleation of Copper on Tantalum in a Liquid Ammonia based Electrolyte. Proc. of EMC 1 (2009), Innsbruck, Österreich, 327 – 345

Konetschnik S., H. Antrekowitsch und G. Schneeberger: Recovery of Copper and Precious Metals from Shredder Residues. Proc. of EMC 2 (2009), Innsbruck, Österreich, 661 – 673

Moderer L., T. Messner und H. Antrekowitsch: Influence and Investigation of the Parameters on the Gas Concentration in liquid Copper at Foundry Furnaces. Proc. of EMC 2 (2009), Innsbruck, Österreich, 687 – 701

Schmidl J., H. Kadereit, T. Bünger und H. Antrekowitsch: Copper Converting at Aurubis – A survey of Minor Element Distribution. Proc. of EMC 2 (2009), Innsbruck, Österreich, 747 – 757

Wenzl C., I. Filzwieser, H. Antrekowitsch und J. Pesl: Investigations on Anode Casting Wheels to Optimise Anode Quality. Proc. of EMC 2 (2009), Innsbruck, Österreich, 793 – 805

Wagner C., S. Luidold, H. Antrekowitsch und K. Rimmer: New Processes for the Production of Tin Chalcogenides. Proc. of EMC 3 (2009), Innsbruck, Österreich, 931 – 942

Hackl A., H. Antrekowitsch, H. Zunko und R. Brisberger: Development of Zn-Al-Mg-alloys for Continuous Hot Dip Galvanising of Hot Rolled Steel Strip. Proc. of EMC 3 (2009), Innsbruck, Österreich, 1029 – 1037

Schnideritsch H., J. Antrekowitsch, H. Antrekowitsch und C. Wagner: Characterisation, Melting and Reduction Behaviour of Heavy Metal Containing Residues. Proc. of EMC 3 (2009), Innsbruck, Österreich, 1155 – 1167

Zunko H., R. Ebner, A. Hackl, H. Antrekowitsch und R. Brisberger: Investigations on Cracking Behaviour of Zn-Al-Mg-Coatings on Sheet Steel. Proc. of EMC 3 (2009), Innsbruck, Österreich, 1201 – 1210

Ressel R., S. Luidold und H. Antrekowitsch: Influence of Additional Burden Mixing at the Production of Ferromolybdenum. Proc. of EMC 4 (2009), Innsbruck, Österreich, 1469 – 1478

Luidold S. und H. Antrekowitsch: Wasserstoff – ein Reduktionsmittel mit Zukunft. Teil 3: Neue Entwicklungen bei der Wasserstoffreduktion. BHM, 154. Jg. (2009), Heft 7, 309 – 313

Prillhofer B., H. Böttcher und H. Antrekowitsch: Weiterentwicklungen zur Evaluierung der Schmelzequalität von Aluminiumlegierungen, basierend auf dem Prefil-Verfahren. BHM, 154. Jg. (2009), Heft 7, 314 – 319

Antrekowitsch H., S. Luidold und J. Antrekowitsch: Experimental Investigations on V-containing Steelwork Slags with a low V2O5 content. BHM, 154. Jg. (2009), Heft 7, 328 – 333

Zunko H., A. Hackl, R. Ebner, R. Brisberger, F. Priewasser, C. Riener und H. Antrekowitsch: Analyse des Umformverhaltens von Zn-Al-Mg-Beschichtungen. BHM, 154. Jg. (2009), Heft 7, 334 – 341

Hackl A., H. Zunko, H. Antrekowitsch und R. Brisberger: Entwicklung von Zn-Al-Mg-Legierungen zum Verzinken vom Warmband mittels CVGL®-Technologie. BHM, 154. Jg. (2009), Heft 9, 398 – 402

Pucher P., H. Antrekowitsch, H. Böttcher, H. Kaufmann und P. Uggowitzer: Einfluss der Legierungszusammensetzung auf die mechanischen Eigenschaften der Sekundärlegierung A226 (AlSi9Cu3) im wärmebehandelten T6-Zustand. Giessereipraxis (2009), Nr. 11, 354 – 358

Luidold S. und H. Antrekowitsch: Direct carburation of tungsten blue oxide in a fluidized bed reactor. International journal of refractory metals & hard materials 26 (2008), 324 – 328

Prillhofer R., B. Prillhofer und H. Antrekowitsch: Einsatzmöglichkeit prozessbedingter Reststoffe beim Al-Recycling. Proc. of Depotech (2008), Leoben, Österreich, 231 – 236

Krassnig H., B. Kleimt, L. Voj und H. Antrekowitsch: Laserbasierte Nachverbrennungssteuerung im Elektrolichtbogenofen. Stahl und Eisen 128 (2008) Nr. 9, 41 – 52

Potesser M., B. Holleis, D. Spoljaric und H. Antrekowitsch: Oxipyr-Technik für Erwärmungsöfen zur Energiereduktion oder Produktionssteigerung. Stahl und Eisen, 128. Jg. (2008), Heft 7, 59 – 63

Prillhofer B., H. Antrekowitsch und H. Böttcher: Optimisation of the melt quality in casting holding furnaces. Proc. Light Metals TMS (2008), New Orleans, USA, 627 – 632

Prillhofer B., H. Antrekowitsch, H. Böttcher und P. Enright: Nonmetallic inclusions in the secondary aluminium industry for the production of aerospace alloys. Proc. Light Metals TMS (2008), New Orleans, USA, 603 – 608

Prillhofer R., B. Prillhofer und H. Antrekowitsch: Verwertung von Reststoffen beim Aluminium-Recycling. BHM, 153. Jg. (2008), Heft 3, 103 – 108

Prillhofer B., H. Böttcher und H. Antrekowitsch: Mögliche Einschlussbildung bei der Herstellung von Walzbarren der Legierung. EN AW-7075. Aluminium, 6, (2008), 78 – 84

Konetschnik S., H. Schnideritsch, H. Antrekowitsch und D. Brandstätter: Aufarbeitung wismuthaltiger Krätzen. BHM, 153. Jg. (2008), Heft 3, 115 – 120

Luidold S. und H. Antrekowitsch: Wasserstoff – ein Reduktionsmittel mit Zukunft: Teil 2 – Thermodynamik der Wasserstoffreduktion. BHM, 153. Jg. (2008), Heft 3, 85 – 90

Koch S. und H. Antrekowitsch: Free-Cutting Aluminium Alloys with Tin as Substitution for Lead. BHM, 153. Jg. (2008), Heft 7, 278 – 281

Antrekowitsch H., S. Luidold und H. Gaugl: Thermodynamic Calculations of the Production of Ferrovanadium from V-containing Steelworks Slags with a low Content of V2O5. Part 1. BHM, 153. Jg. (2008), Heft 3, 109 – 115

Antrekowitsch H.: Charakterisierung von Reststoffen und Verfahrensoptimierung beim Recycling. Heft 115 der Schriftenreihe der GDMB Gesellschaft für Bergbau, Metallurgie, Rohstoff- und Umwelttechnik des 43. Metallurgischen Seminars, NE-Metallrecycling – Grundlagen und aktuelle Entwicklungen (2008), Dortmund, Deutschland, 27 – 36

Antrekowitsch H., P. Pucher und S. Konetschnik: Aufbereitung und Metallurgie von metallhaltigen Reststoffen. BHM, 153. Jg. (2008), Heft 6, 230 – 234

Potesser M., B. Holleis und H. Antrekowitsch: New Pyrometallurgical Bullion Lead Refining Process. Proc. TMS (2008), New Orleans, USA, 467 – 472

Potesser M., B. Holleis, A. Hengelmolen, H. Antrekowitsch und D. Spoljaric: Highest Efficiency and Economic Burner Concepts for the Metallurgical Industry. Proc. Light Metals TMS (2008), New Orleans, USA, 553 – 556

Antrekowitsch H. und T. Messner: Nonferrous metals at the recycling of electronic scrap – treatment and metallurgical processing. Proc. of ECO-X: Sustainable Recycling Management & Recycling Network Centrope (2007), Wien, Österreich, 111 – 118

Koch S. und H. Antrekowitsch: Study of the precipitation kinetics in AlMgZn alloys by using DSC. Proc. of EMC 4 (2007), Düsseldorf, Deutschland, 1947 – 1956

Konetschnik S., J. Antrekowitsch, D. Offenthaler und H. Antrekowitsch: Thermische Vorbehandlung PGM-haltiger Katalysatoren für die hydrometallurgische Aufarbeitung. BHM 152 (2007) 3, 68 – 75

Krassnig H., S. Luidold, H. Antrekowitsch, B. Kleimt und L. Voj: Energie- und Stoffbilanzierung eines 36-t-Elektrolichtbogenofens. BHM 152 (2007) 9, 287 – 291

Luidold S., H. Antrekowitsch und R. Ressel: Production of Nb – powder by magnesiothermic reduction of niobium oxides in a cyclone reactor. Proc. of EMC 2 (2007), Düsseldorf, Deutschland, 995 – 1006

Luidold S. und H. Antrekowitsch: Wasserstoff – ein Reduktionsmittel mit Zukunft: Teil 1 – Stand der Technik. BHM 152 (2007) 9, 292 – 295

Luidold S., H. Antrekowitsch und R. Ressel: Production of niobium powder by magnesiothermic reduction of niobium oxides in a cyclone reactor. Int. Journal of Refractory Metals and Hard Materials 25 (2007) 5-6, 423 – 432

Luidold S. und H. Antrekowitsch: Möglichkeiten zur Lösung der Chromproblematik in der Metallurgie. BHM 152 (2007) 3, 47 – 52

Luidold S. und H. Antrekowitsch: Hydrogen as a Reducing Agent: Thermodynamic possibilities. JOM 59 (2007) 10, 58 – 62

Luidold S. und H. Antrekowitsch: Hydrogen as a Reducing Agent: State-of-the-Art Science and Technology. JOM 59 (2007) 6, 20 – 26

Matl B., S. Luidold, H. Antrekowitsch, P. Ebner und K. Rimmer: Charakterisierung eines neuen Düsensystems zur Zerstäubung von Metallschmelzen. BHM 152 (2007) 2-3, 76 – 79

Messner T., S. Pogatscher, H. Antrekowitsch und J. Pesl: Themodynamic modelling of the behaviour of accompanying elements in secondary copper production. Proc. of EMC 4 (2007), Düsseldorf, Deutschland, 1819 – 1836

Mubarok Z., H. Antrekowitsch, G. Mori, A. Lossin und G. Leuprecht: Problems in the Electrolysis of Copper Anodes with high Contents of Nickel, Antimony, Tin and Lead. Proc. of Copper/Cobre V (2007), Toronto, Kanada, 59 – 76

Mubarok Z., H. Antrekowitsch und G. Mori: Passivation Behaviour of Copper Anodes with Various Chemical. Proceedings of TMS 136th Annual Meeting & Exhibiton (2007), 1 – 10

Potesser M., H. Antrekowitsch und U. Zulehner: The new elliptical anode furnace metallurgical compared with conventional copper anode furnaces. Proc. of EMC 1 (2007), Düsseldorf, Deutschland, 157 – 169

Potesser M., H. Antrekowitsch und U. Zulehner: The Elliptical Anode Furnace – A metallurgical Comparison – Part One. Proc. of Copper/Cobre III (2007), Toronto, Kanada, 667 – 680

Potesser M., H. Antrekowitsch und B. Holleis: Burner Development Chamber for the Copper and Nonferrous Industry. Proc. of Copper/Cobre III (2007), Toronto, Kanada, 681 – 700

Potesser M., H. Antrekowitsch und J. Köhöhofer: The Elliptical Anode Furnace – A Metallurgical Comparison. RHI Bulletin 2 (2007), 44 – 48

Prietl T., O. Zach, B. Drew und H. Antrekowitsch: Understanding vessel integrity, a study of the thermo-mechanical behaviour of refractory lining segments. Proc. of EMC 2 (2007), Düsseldorf, Deutschland, 1017 – 1028

Prillhofer B. und H. Antrekowitsch: Abscheidung von nichtmetallischen Einschlüssen bei der Raffination von Aluminiumlegierungen. BHM 152 (2007) 3, 53 – 61

Ressel R., S. Luidold, H. Antrekowitsch und M. Hochenhofer: Influence of the basicity and dwell time of slags on the oxidation state of vanadium ions. Proc. of EMC 2 (2007), Düsseldorf, Deutschland, 1029 – 1040

Wenzl C., H. Antrekowitsch, B. Kronberger und E. Locher: Current activities for increasing the recycling efficiency at the Fernwärme Wien DMA battery recycling plant. Proceedings of 12th ICBR (2007)

Wenzl C., H. Antrekowitsch, I. Filzwieser und J. Pesl: Anode Casting – Chemical Anode Quality. Proc. of Copper/Cobre V (2007), Toronto, Kanada, 91 – 110

Wenzl C., A. Filzwieser und H. Antrekowitsch: Review of Anode Casting Part II: Physical Anode Quality. World of metallurgy – Erzmetall 60 (2007), 83 – 88

Wenzl C., A. Filzwieser und H. Antrekowitsch: Review of Anode Casting Part I: Chemical Anode Quality. World of metallurgy – Erzmetall 60 (2007), 77 – 83

Wenzl C., H. Antrekowitsch, J. Antrekowitsch und D. Offenthaler: Aufarbeitung von verunreinigten Sn-Schrotten und Sn-hältigen Reststoffen. Proc. of Depotech (2006), Leoben, Austria, 391 – 398

Seebacher H., W. Sunk, H. Antrekowitsch und M. Klade: Recycling von Magnesium in der Automobilindustrie. Metall 4 (2006), 203 – 209

Seebacher H., W. Sunk, H. Antrekowitsch und W. Sunk: Recycling von Aluminium in der Automobilindustrie. Aluminium 82 (2006) 1/2, 24 – 31

Luidold S., P. Paschen und H. Antrekowitsch: New Process for Niobium Powder Production. Erzmetall 59 (2006) 4, 202 – 206

Potesser M., H. Antrekowitsch, H. Rinnhofer und U. Zulehner: A comparison of conventional copper anode furnaces with the new elliptical anode furnace concept. Proc.of Sohn International Symposium 5 (2006), San Diego, Californien, USA, 109 – 120

Potesser M., T. Schoeberl, H. Antrekowitsch und J. Bruckner: The Characterization of the Intermetallic Fe-Al Layer of Steel-Aluminium Weldings. Proc.of 135th TMS Annual Meeting & Exhibition (2006), San Antonio, Texas, USA, 167 – 176

Paschen P. und H. Antrekowitsch: From Bauxite to Secoundary Aluminium – Consumption and Sustainable Development: A World-Wide Survey. Proc.of Bauxite & Alumina: International Symposium on Aluminium: From Raw Materials to Applications as held at the 45th Annual Conference of Metallurgists of CIM (COM 2006) (2006), Montreal, Kanada

Luidold S. und H. Antrekowitsch: New Process for Direct Carburation of Tungsten Blue Oxide to Tungsten Carbide. Erzmetall 59 (2006) 6, 327 – 332

Konetschnik S., M. Potesser, H. Antrekowitsch und R. Leitner: Substitution von herkömmlichen Federstählen der Spezialfahrzeugindustrie durch Nichteisenmetalllegierungen. Metall 5 (2006), 294 – 298

Koch S., H. Antrekowitsch, G. Anger und J. Enser: Investigation of the Correlation between Homogenisation and Tensile Properties of AlMgSi-Alloys. Proc.of Aluminium 2006: International Symposium on Aluminium: From Raw Materials to Applications as held at the 45th Annual Conference of Metallurgists of CIM (COM 2006) (2006), Montreal, Kanada, 735 – 746

Hochenhofer M., H. Antrekowitsch, M. Potesser und W. Labenbacher: Recycling of Oxidic Waste from the Ferroalloy Production. Proc.of 135th TMS Annual Meeting & Exhibition (2006), San Antonio, Texas, USA, 979 – 988

Antrekowitsch H.: Universitärer Forschungscluster “Sustainable Technologies in Metal Production and Processing” – Nichteisenmetallurgie. BHM 151 (2006) 7, 266 – 269

Antrekowitsch H., F. Prior und W. Spruzina: Recycling von Metallen aus Elektronikschrott. Fortschritt-Berichte VDI, Technik und Wirtschaft, Nachhaltigkeit in der Elektron(nik)industrie 16 (2006) 179, 212 – 239

Antrekowitsch H. und F. Prior: Elektronikschrottrecycling. Fortschritt-Berichte VDI, Technik und Wirtschaft, Nachhaltigkeit in der Elektron(nik)industrie 16 (2006) 179, 193 – 211

Antrekowitsch H., M. Complojer, S. Koch, P. Paschen, K. Gamweger und A. Kraly: Porous Plugs for Gas Purging in the Aluminium Industry. Proc.of Aluminium 2006: International Symposium on Aluminium: From Raw Materials to Applications as held at the 45th Annual Conference of Metallurgists of CIM (COM 2006) (2006), Montreal, Kanada, 839 – 850

Antrekowitsch H., M. Potesser, W. Spruzina und F. Prior: Metallurgical Recycling of Electronic Scrap. Proc.of 135th TMS Annual Meeting & Exhibition (2006), San Antonio, Texas, USA, 899 – 908

Antrekowitsch H. und M. Hochenhofer: Winnacker-Küchler. Chemische Technik Band 6a: Stahlveredler; 5., erweiterte und aktualisierte Auflage. (2006)

Antrekowitsch H., M. Complojer, K. Gamweger und A. Kraly: Process optimisation and quality improvement by gas-purging in the Al-industry. Proc. of the 2nd International Light Metals Technology Conference (2005), St. Wolfgang, Österreich, 97 – 101

Antrekowitsch H., C. Wenzl, I. Filzwieser und J. Pesl: Pyrometallurgical refining of copper in an anode furnace. Proc. of 134th TMS Annual Meeting & Exhibition (2005), San Francisco, USA, 191 – 204

Antrekowitsch H., F. Prior und W. Staber: Recycling of copper and noble metals from electronic waste. Proc. of eco-X (2005), Wien, Österreich, 549 – 562

Hermann C., H. Antrekowitsch, T. Luger, H. Seebacher und M. Stachura: Product development and metallurgy – Combining two views on the calculation of recovery rates in weee recycling. Proc.of 7th World Congress on Recovery, Recycling and Re-Integration CD-ROM (2005), Peking, China

Hochenhofer M., H. Antrekowitsch und M. Juhart: Main parameters on the performance of a desulfurization of Ferro-Nickel by slag reaction. Proc. of 134th TMS Annual Meeting & Exhibition (2005), San Francisco, USA, 629 – 639

Jeitler B., W. Staber, H. Antrekowitsch und G. Panowitz: Demontage, Verwertung und Entsorgung von EAG´s. Proc. of eco-X (2005), Wien, Österreich, 577 – 592

Matl B., C. Redl, H. Antrekowitsch und A. Edlinger: Tribojet, a New and Innovative Device for Atomizing Liquid Melts. Proc. of 16th International Plansee Seminar 1 (2005), Reutte, Österreich, 580 – 592

Matl B., H. Antrekowitsch und A. Pestalozzi: Reactive Atomization of black copper by using the PATCO-Sprayconvertor. Erzmetall 58 (2005) 2, 83 – 88

Matl B., C. Redl und H. Antrekowitsch: Tribojet atomization unit: Preliminary test of a new method. Proc.of EMC Tribojet atomization unit: Preliminary test of a new method. EMC (2005), Dresden, Deutschland, 795 – 805

Messner T., H. Antrekowitsch und J. Pesl: Stoffstromanalyse am Schachtofen der Montanwerke Brixlegg AG. BHM 7 (2005), 251 – 257

Messner T., H. Antrekowitsch und J. Pesl: Element Distribution and Process Optimization at the Secondary Metallurgy of Copper. Proc.of EMC (2005) 1, Dresden, Deutschland, 49 – 62

Potesser M., H. Schnideritsch und H. Antrekowitsch: Chromium in different metallurgical Residues with special regard to hexavalent chromium. Proc.of EMC (2005) 3, Dresden, Deutschland, 1205 – 1219

Prietl T. und H. Antrekowitsch: The Evaluation of Refractory Lining Thermo-Mechanical Properties. Proc.of EMC (2005) 3, Dresden, Deutschland, 1099 – 1112

Seebacher H., H. Antrekowitsch, C. Rammer, A. Sigmund und P. Wohlmuth: Optimierung der Masselvorbehandlung bei der Sekundärmetallurgie von Magnesium. Druckguss-Praxis 01 (2005), 13 – 18

Antrekowitsch H., T. Prietl und A. Filzwieser: Spülgastechnik in der Kupferindustrie. BHM 149 (2004) 5, 186 – 192

Antrekowitsch H., J. Antrekowitsch und R. Hepberger: Pyrometallurgische Aufarbeitung von Reststoffen in einem Flash-Reaktor. Proc. of Depotech (2004), Leoben, Österreich, 197 – 204

Antrekowitsch H.: Verringerung der CO2-Emissionen durch Optimierung der Raffinationsverfahren in der Sekundärmetallurgie der NE-Metalle. Proc.of Forum für Metallurgie und Werkstofftechnik (2004), Leoben, Österreich, 39

Antrekowitsch H. und F. Prior: Recycling of metals and plastics from electronic scrap. Proc.of Global Conference on Sustainable Product Development and LCE (2004), Berlin, Deutschland, 121 – 126

Antrekowitsch J. und H. Antrekowitsch: Dezincing of steel scrap. A solution for the zinc-iron problem in steel industry?. BHM 149 (2004) 1, 28 – 34

Ebner P., H. Antrekowitsch, K. Gamweger und K. Campabadal: Gas treatment as a refining process for aluminuim recycling. Proc. of Global Symposium on Recycling, Waste Treatment and Clean Technology I (2004), Madrid, Spanien, 903 – 911

Filzwieser I., H. Antrekowitsch und A. Filzwieser: Potential Measurements in a High Current Winning Electrolysis. Erzmetall 57 (2004) 2, 63 – 68

Hebenstreit R., H. Antrekowitsch, U. Galovsky und H. Kaufmann: Analytik und Behandlung von Magnesiumkrätzen aus der Sekundärmetallurgie. Gießerei-Praxis 12 (2004), 449 – 454

Hochenhofer M., H. Antrekowitsch und M. Juhart: Adaptation of Process Control to increased Phosphorous Content of Raw Materials in Ferrovanadium Production. Proc. of Global Symposium on Recycling, Waste Treatment and Clean Technology I (2004), Madrid, Spanien, 513 – 523

Hochenhofer M., H. Antrekowitsch und M. Juhart: Einflussparameter auf eine Entschwefelung nach dem Schlackenreaktionsverfahren bei der Herstellung von Ferronickel aus Sekundärrohstoffen. Proc. of Depotech (2004), Leoben, Österreich, 729 – 732

Hochenhofer M., H. Antrekowitsch, J. Leitner und E. Pankratz: Optimierung der Entschwefelung bei der Herstellung von Ferronickel aus Sekundärrohstoffen. Metall 58 (2004) 4, 196 – 202

Messner T., H. Antrekowitsch, J. Pesl und M. Hofer: Prozessoptimierung durch Stoffstromcontrolling. Proc. of Depotech (2004), Leoben, Österreich, 693 – 696

Prietl T., H. Antrekowitsch, I. Filzwieser und K. Gamweger: Spülgasbehandlung in der Kupfer- und Aluminium-Sekundärmetallurgie. Proc. of Depotech (2004), Leoben, Österreich, 721 – 724

Schuster S., G. Graller-Kettler, H. Antrekowitsch und J. Pesl: Elimination Of Impurities From Anode Copper By Selective Oxidation. Proc. of Global Symposium on Recycling, Waste Treatment and Clean Technology III (2004), Madrid, Spanien, 2069 – 2080

Seebacher H., H. Antrekowitsch, F. Prior und R. Leitner: Recycling of electronic scrap. Proc. of Global Symposium on Recycling, Waste Treatment and Clean Technology III (2004), Madrid, Spanien, 2623 – 2633

Seiler S., M. Hochenhofer, H. Antrekowitsch, M. Juhart und E. Pankratz: Ermittlung der Einflussgrößen bei der Herstellung von Ferrovanadium aus Sekundärrohstoffen. Metall 10 (2004), 642 – 647

Thuy M., J. Antrekowitsch, H. Antrekowitsch und J. Pesl: Recovery of Valuable Metals from Sludges and Residues of the Secondary Copper Industry by atmospheric Leaching. BHM 149 (2004) 1, 9 – 15

Antrekowitsch H.: Recycling von Verbundwerkstoffen aus Stahl und Nichteisenmetallen: Technische Möglichkeiten und gesetzliche Rahmenbedingungen. Proc. of Forum für Metallurgie und Werkstofftechnik (2003), Leoben, Österreich

Antrekowitsch H.: Gas treatment in the secondary metallurgy of nonferrous metals. Proc. of EMC (2003), Hannover, Deutschland, 751 – 764

Antrekowitsch H.: Networking in the Field of Metal Recycling. BHM 148 (2003), 5 – 10

Antrekowitsch J. und H. Antrekowitsch: Investigations in different reducing agents for the pyrometallurgical treatment of steel mill dusts. Proc. of 132th TMS Annual Meeting & Exhibition (2003), San Diego, USA, 539 – 549

Antrekowitsch J. und H. Antrekowitsch: Dezincing of steel scrap. A solution for the zinc-iron problem in steel industry?. Proc. of EMC (2003), Hannover, Deutschland, 449 – 463

Antrekowitsch J. und H. Antrekowitsch: Einfluss unterschiedlicher Reduktionsmittel bei der pyrometallurgischen Aufarbeitung von Elektrolichtbogenofenstäuben. Stahl und Eisen 123 (2003) 5, 61 – 67

Antrekowitsch J. und H. Antrekowitsch: Recovery of Zinc and Iron from EAF Steel Mill Dusts with Special Focus on Halogen and Residues. BHM 148 (2003) 1, 15 – 20

Filzwieser I. und H. Antrekowitsch: CFD – Modelling of the Electrolyte Flow in a Copper Electrolysis Cell. Proc. of microCAD 2003 (2003), Miskolc, Ungarn, 1 – 14

Hochenhofer M., H. Antrekowitsch, M. Juhart und A. Filzwieser: The Effect of a Gas Purging System on the Desulphurization of Ferro-Nickel in an Electric Arc Furnace at the Treibacher Industry AG. RHI Bulletin 1 (2003), 22 – 24

Male A., H. Antrekowitsch und A. Kraly: Einfluss des Kalziums in Sekundäraluminiumschmelzen. Druckguss-Praxis (2003) 4, 152 – 160

Thuy M., J. Antrekowitsch, H. Antrekowitsch und J. Pesl: Recovery of Valuable Metals from Sludges and Residues of the Secondary Copper Industry by atmospheric Leaching. Proc. of EMC (2003), Hannover, Deutschland, 221 – 240

Antrekowitsch H., G. Hanko und P. Paschen: Recycling of Aluminium and Magnesium Parts from Used Cars: Legislative Frame and Consequences for Metallurgy and Material Design. Proc. of Environmental Sustainability Conference and Exhibition (2002), 475 – 481

Antrekowitsch H. und G. Hanko: Metallurgie des Leichtmetallrecyclings bei Altautos unter Berücksichtigung der gesetzlichen Rahmenbedingungen. Erzmetall 55 (2002) 11, 598 – 605

Antrekowitsch H., G. Hanko und P. Ebner: Recycling of different types of magnesium scrap. Proc. of 131th TMS Annual Meeting & Exhibition (2002), Seattle, USA, 43 – 48

Antrekowitsch J., H. Antrekowitsch und H. Seebacher: Aufarbeitung von Stahlwerksstäuben. Erzmetall 55 (2002) 5, 49 – 56

Hanko G., H. Antrekowitsch und P. Ebner: Recycling Automotive Magnesium Scrap. Journal of Metals 54 (2002) 2, 51 – 54

Sommerhofer H., A. Petrus, H. Antrekowitsch und P. Paschen: Beitrag zur Gefügeentwicklung bei der Herstellung thixotroper Aluminiumwerkstoffe. Gießerei-Praxis 6 (2002), 219 – 222

Antrekowitsch H.: NE-Metall-Recycling in der Kfz-Industrie. BHM 146 (2001) 5, 188 – 193

Antrekowitsch H., P. Paschen und J. Antrekowitsch: Mengen- und Energiebilanz bei der Herstellung von Zink. Erzmetall 54 (2001) 6, 301 – 311

Antrekowitsch J. und H. Antrekowitsch: Hydrometallurgically Recovering Zinc from Electric Arc Furnace Dusts. Journal of Metals 53 (2001) 12, 26 – 28

Sommerhofer H., P. Anton, H. Antrekowitsch und P. Paschen: Druckabhängigkeit des Gleichgewichts im System Aluminium-Silicium. Giessereiforschung 53 (2001) 1, 25 – 29

Adelhardt W. und H. Antrekowitsch: Stoffmengenflüsse und Energiebedarf bei der Gewinnung ausgewählter mineralischer Rohstoffe. Teilstudie Chrom. Geologisches Jahrbuch, Sonderheft 2 (2000)

Antrekowitsch H. und P. Paschen: Ist Eisen ein Metall? .. aus der Sicht des Nichteisenmetallurgen. BHM 145 (2000) 9, 363 – 367

Presentations

Antrekowitsch H.: Recycling von Nichteisenmetallen – ein wichtiger Beitrag zur Rohstoffversorgung in Europa. Forum für Metallurgie und Werkstofftechnik, Leoben, Österreich, 2022

Antrekowitsch H.: Recycling von Aluminium. 12. Ranshofener Leichtmetalltage, Salzburg, Österreich, 2022

Antrekowitsch H.: Recycling von Nichteisenmetallen – ein wichtiger Beitrag zur Rohstoffversorgung in Europa. Forum für Metallurgie und Werkstofftechnik, Leoben, Österreich, 2022 

Antrekowitsch H.: Hydrometallurgische Verwertung von verunreinigtem Kupfer aus dem Elektronikschrottrecycling. Berliner Recycling- und Sekundärrohstoff-Konferenz, Berlin, 2. and 3. März, 2020

Antrekowitsch H. and R. Pomberger: Li-Ionen-Batterien – Vom Rohstoff bis zum Recycling. Produktion der Zukunft, Stakeholderdialog bmvit, Wien, 2018

Pogatscher S., G. K.-H Kolb., H. Antrekowitsch, T. Kremmer, P. Dumitraschkewitz , D. Pöschmann and P. J. Uggowitzer: Influence of Interrupted Quenching on Microstructure and Properties of 7xxx Aluminium Alloys. LightMAT, Bremen, Deutschland, 2017

Kolb Gernot K.-H., H. Antrekowitsch, D. Pöschmann, P. J. Uggowitzer and S. Pogatscher: Effect of Interrupted Quenching on Al-Zn-Mg-Cu alloys.TMS 2017,146th Annual Meeting & Exhibition, San Diego, USA, 2017

Antrekowitsch H.: The importance of metal recycling for the sustainability of the metallurgical industry. OPMR 2016, 5th ESEE Dialogue, Budapest, Ungarn, 2016

Pogatscher S., M. Werinos, H. Antrekowitsch and P.J. Uggowitzer: Trace element-added Al-Mg-Si alloys. Thermec’2016, Graz, Austria, 2016

Antrekowitsch H.: Recycling of Mo-containing Materials – Challenges for the Future. 28th Annual General Meeting of the International Molybdenum Association, Wien, Austria, 2016

Antrekowitsch H.: Energie- und Ressourceneffizienz beim Recycling von Metallen. Re-source 2016, München, Deutschland, 2016

Antrekowitsch H.: Metallrecycling. Fachausschuss für Abfallwirtschaft und Städtereinigung des Österreichischen Städtebundes, Leoben, 2016

Antrekowitsch H.: Recycling in der Automobilindustrie – Ist damit eine Rohstoffversorgung zukünftig gesichert?. Vortragsreihe: Innovationen in der Fahrzeugtechnik, FH Joanneum, Graz, 2015

Antrekowitsch H.: Reststoffe aus der Metallurgie – Potenzial oder Konkurrenz für die Mineralrohstoffindustrie. Forum Rohstoffe, Informationsveranstaltung, Schladming, 2015

Antrekowitsch H.: Recycling of low grade aluminium scrap – optimisation of the melting process by using oxyfuel technology. 3rd International Messer Symposium. Baden, 2015

Schlögl C. und H. Antrekowitsch: Impact of different alloying additives and pre-treatments on the anodising behaviour of AA2007. VII Aluminium Surface Since and Technology, Madeira, 2015

Pogatscher S., H. Antrekowitsch, M. Werinos, G. Rank, A. Kaiß, R. Prillhofer, J. Löffler und P. Uggowitzer: Statistical and Thermodynamic Optimization of Trace-Element Modified Al-Mg-Si-Cu Alloys. TMS 2015, Orlando, USA, 2015

Antrekowitsch H.: Kann die jahrhundertlange Erfolgsgeschichte der europäischen Metallerzeugung fortgesetzt werden?. Metallerzeugung – Quo vadis? Tag der Metallurgie, Goslar, Deutschland, 2014

Antrekowitsch H.: Kann durch das Recycling die Versorgung mit wirtschaftsstrategischen Rohstoffen gesichert werden?. Workshop Ressourcen Initiative der Industriellenvereinigung, Wien, 2014

Pogatscher S., H. Antrekowitsch, M. Werinos, B. Prillhofer und P. Uggowitzer: Optimierung der Wärmebehandlung von Aluminiumwerkstoffen der 6xxx Familie. 8. Ranshofener Leichtmetalltage. Geinberg, Österreich, 2014

Pogatscher S., M. Werinos, H. Antrekowitsch und P. Uggowitzer: The role of vacancies in the aging of Al-Mg-Si alloys. ICAA13. Trondheim, Norwegen, 2014

Antrekowitsch H.: Einsatz minderwertiger Schrotte und Reststoffsituation beim Recycling von Aluminium. Berliner Recycling- und Rohstoffkonferenz, Berlin, Germany, 2013

Antrekowitsch H.: Ressourcen und Recycling – eine europäische Herausforderung. Urania, Grenzen des Wachstums, Graz, Österreich, 2013

Antrekowitsch H.: Nachhaltige Rohstoffversorgung. Energie- und Ressourceneffizienz bei der Erzeugung von Nichteisenmetallen. ÖIAV-Seminar, Leoben, Österreich, 2013

Pirker A., H. Antrekowitsch, M. Kettner, W. Fragner und H. Suppan: Recycling of Aluminium Scrap with Organic Load. EMC, Weimar, Deutschland, 2013

Antrekowitsch H.: Reststoffe aus der Aluminium-Sekundärindustrie. Berliner Schlackenkonferenz, Berlin, Deutschland, 2013

Antrekowitsch H.: Energiebedarf beim Recycling und der Primärmetallurgie von Nichteisenmetalle. Stahlwerksausschuss der ASMET, Ranshofen, Österreich, 2013

Antrekowitsch H.: Herausforderung Kreislaufwirtschaft – Beispiele aus der Praxis. Herausforderung Rohstoffknappheit, Dornbirn, Österreich, 2013

Antrekowitsch H.: Energy and resource efficiency at the recycling of nonferrous metals. Synergy Platform 2013 der voestalpine. Energy and Resource Efficiency, 2013, Leoben, Österreich

Antrekowitsch H.: Recycling und Ressourcen – Fakten und Potenziale. Workshop Green Tech Research Styria, Graz, Österreich, 2013

Pogatscher S., H. Antrekowitsch, M. Werinos, F. Moszner, S. Gerstl, M. Francis, W. Curtin und P. Uggowitzer: Aging of trace element modified Al-Mg-Si alloys. 2nd European Atom Probe Workshop, Zürich, Schweiz, 2013

Pogatscher S., H. Antrekowitsch und P. Uggowitzer: Linking the effect of solute super-saturation and room temperature storage on artificial aging of Al-Mg-Si alloys. Euro LightMAT Conference 2013, Bremen, Deutschland, 2013

Angerer T. und H. Antrekowitsch: Werkstoffe und Metallphysik in der Aeronautik (Teil 4). Ausbildungsseminar in der Fliegerwerft 2, Zeltweg, Österreich, 2012

Antrekowitsch H.: Recycling von nichteisenmetallhaltigen Reststoffen. Symposium Rohstofflogistik, Leoben, Österreich, 2012

Antrekowitsch H.: Effiziente Ressourcen- und Rohstoffnutzung – eine Voraussetzung zur Sicherung des Wirtschaftsstandortes Österreichs. Intelligente Produktion, Info Day, Wien, Österreich, 2012

Stadler F., H. Antrekowitsch, W. Fragner, H. Kaufmann und P. Uggowitzer: The effect of Nickel on the thermal conductivity of Al-Si foundry alloys. 13th International Conference on Aluminum Alloys (ICAA13) , Pittsburgh, Vereinigte Staaten (USA)

Pogatscher S., H. Antrekowitsch, H. Leitner, D. Pöschmann, Z. Zhang und P. Uggowitzer: influss einer unterbrochenen Abschreckung auf die Warmauslagerung von Al-Mg-Si Legierungen. Forum für Metallurgie und Werkstofftechnik,

Leoben, Österreich, 2012

Antrekowitsch H.: Herstellungsverfahren bei der Erzeugung von Ferrolegierungen. Stahlwerksausschuss der ASMET, Althofen, Österreich, 2012

Antrekowitsch H.: Zukünftige Herausforderungen beim Recycling von Aluminium. 7. Ranshofener Leichtmetalltage, Gmunden, Österreich, 2012

Antrekowitsch H.: Stand der Wissenschaft – kritische Rohstoffe. Informationsworkshop: Beitrag der Abfallwirtschaft zur Versorgungssicherheit seltener Rohstoffe, Leoben, Österreich, 2012

Antrekowitsch H.: Wasserstoffnutzung – Rahmenbedingungen, Stand der Technik, Potenzial. Risiko: dialog, Grüner Wasserstoff – Zukunft der Energieversorgung?,. Österreichische Akademie der Wissenschaften, Wien, Österreich,

2012

Angerer T. und H. Antrekowitsch: Werkstoffe und Metallphysik in der Aeronautik (Teil 2). Ausbildungsseminar in der Fliegerwerft 2, Zeltweg, Österreich, 2011

Angerer T. und H. Antrekowitsch: Werkstoffe und Metallphysik in der Aeronautik (Teil 1). Ausbildungsseminar in der Fliegerwerft 2, Zeltweg, Österreich, 2011

Antrekowitsch H.: Recycling von RFID-Komponenten. 9. Internationaler Leobener Logistik Sommer, Leoben, Österreich, 2011

Antrekowitsch H.: Recycling von Sondermetallen als Beitrag zur Ressourcensicherheit in Europa. 1. Freiberger Ressourcentechnologie-Symposium, Freiberg, Deutschland, 2011

Antrekowitsch H.: Metallgewinnung: Vom Bergbau zum “Urban Mining”. ÖWAV-Tagung, Wirtschaftsfaktor Schrott, Ressourcensicherung durch Stahl- und Metallrecycling, Linz, Österreich, 2011

Antrekowitsch H.: Stoffströme beim Recycling von Metallen unter besonderer Berücksichtigung der anfallenden Reststoffe. 8. Internationaler Leobener Logistik Sommer, Leoben, Österreich, 2010

Antrekowitsch H.: Entstehung und Entsorgung von Rotschlamm. DepoTech, Leoben, Österreich, 2010

Suppan H., H. Böttcher, H. Kaufmann, P. Pucher und H. Antrekowitsch: Einfluss der chemischen Zusammensetzung der Gusslegierung AlSi9Cu3 auf die mechanischen und gießtechnologischen Eigenschaften. Deutscher Giessereitag, 100 Jahre Verein Deutscher Giessereifachleute, Berlin, Deutschland, 2009

Antrekowitsch H.: Metallrecycling in der Automobilindustrie – gesetzliche Rahmenbedingungen und technologische Herausforderungen. 53. Österreichische Giessereitagung, Salzburg, Österreich, 2009

Antrekowitsch H.: Metallurgisches Recycling von metallhaltigen Reststoffen und Schrotten – eine verfahrenstechnische und rohstoffpolitische Herausforderung. Recycling und Rohstoffe, Berliner Recycling- und Rohstoffkonferenz, Berlin, Deutschland, 2009

Pucher P., H. Böttcher, H. Kaufmann, H. Antrekowitsch und P. Uggowitzer: Effect of compositional variations on the mechanical and fluidity performance of the aluminum cast alloy AlSi9Cu3. 1st World PhD Foundry Conference (2009), Brünn, Tschechien

Antrekowitsch H.: Roadmap für Hochleistungswerkstoffe: Ressourcen. Forum für Metallurgie und Werkstofftechnik, Leoben, Österreich, 2009

Pucher P., H. Antrekowitsch, H. Böttcher, H. Kaufmann und P. Uggowitzer: Optimierung des Eigenschaftsprofils der Aluminiumgusslegierung AlSi9Cu3 innerhalb der Legierungstoleranz. Leichtmetall-Fachausschuss der GDMB, Hamburg, Deutschland, 2009

Antrekowitsch H.: Einfluss der europäischen Umweltgesetzgebung auf die Werkstoffentwicklung. 7. Werkstoffkongress, Leoben, Österreich, 2009

Antrekowitsch H.: Titanium and magnesium – materials in modern society. Conference of Automotive engineering – Trends in joining technology and materials science, Wels, Österreich, 2008

Antrekowitsch H.: Energie- und Klimapolitik: Risiken und Chancen für eine nachhaltige metallurgische Entwicklung. Forum für Metallurgie und Werkstofftechnik, Leoben, Österreich, 2008

Antrekowitsch H.: Charakterisierung von Reststoffen und Verfahrensoptimierung beim Recycling. 43. Metallurgisches Seminar der GDMB Gesellschaft für Bergbau, Metallurgie, Rohstoff- und Umwelttechnik, NE-Metallrecycling – Grundlagen und aktuelle Entwicklungen, Dortmund, Deutschland, 2008

Antrekowitsch H.: Aufbereitung von metallhaltigen Reststoffen und Schrotten. Aufbereitungstechnisches Seminar, Leoben, Österreich, 2008

Antrekowitsch H.: Nickel aus dem Kraubather Ultramafit im Vergleich zu weltweit angewandten Herstellungsverfahren. Montangeschichtliche Tagung Kraubath, Kraubath, Österreich, 2008

Antrekowitsch H.: Aluminiumforschung an den Universitäten. Aluminium 2008, 7. Weltmesse und Kongress, Vortragsforum, Essen, Deutschland, 2008

Antrekowitsch H.: Nichteisenmetallurgie an der Montanuniversität – Forschung und Lehre. 30. Tagung der GDMB Bezirksgruppe Süd in Leoben, Österreich, 2008

Antrekowitsch H.: Nonferrous metals at the recycling of electronic scrap – treatment and metallurgical processing. ECO-X: Sustainable Recycling Management & Recycling Network Centrope (2007), Wien, Österreich

Antrekowitsch H.: Einfluss der Aufbereitungstechnologie auf die Metallurgie. Recyclingfachausschuss der ASMET, Juni 2007, Amstetten, Österreich

Antrekowitsch H.: Recycling von Magnesium in der Kfz-Industrie. Magna Workshop, Oktober 2007, Leoben, Österreich

Antrekowitsch H.: Verfahrenstechnologie und Entwicklung bei der Ferrolegierungsherstellung. 166. Stahlwerksausschuss (2005). Loipersdorf, Österreich

Antrekowitsch H.: Recycling of copper and noble metals from electronic waste. eco-X: ecology and economy in electroniX (2005). Wien, Österreich

Antrekowitsch H.: Demontage, Verwertung und Entsorgung von EAG’s. eco-X: ecology and economy in electroniX (2005). Wien, Österreich

Antrekowitsch H.: Process optimisation and element distribution at the converter in the secondary copper metallurgy. Kupferfachausschuss 2005, Hamburg, Deutschland

Antrekowitsch H.: Recycling von Aluminium unter besonderer Berücksichtigung der Spülgastechnik. Institut für Nichteisenmetallurgie und Reinststoffe, Freiberg, Deutschland

Antrekowitsch H.: Process optimisation and quality improvement by gas-purging in the Al-industry. Light Metals Technology 2005

Antrekowitsch H.: Gas treatment as a refining process for aluminuim recycling. Global Symposium on Recycling, Waste Treatment and Clean Technology (2004), Madrid, Spanien

Antrekowitsch H.: Metallurgische Aufarbeitung von Elektroschrott unter Berücksichtigung der dabei entstehenden Reststoffe. Tagung Elektro- und Elektronikaltgeräte – Abfall oder wertvoller Rohstoff (2004), Leoben, Österreich

Antrekowitsch H.: Aufarbeitung von metallhältigen Reststoffen. Fachausschusstagung NE-Metalle (2004), Leoben, Österreich

Antrekowitsch H.: Recycling of metals and plastics from electronic scrap. Global Conference on Sustainable Product Development and LCE (2004), Berlin, Deutschland

Antrekowitsch H.: Verringerung der CO2-Emissionen durch Optimierung der Raffinationsverfahren in der Sekundärmetallurgie der NE-Metalle. Forum für Metallurgie und Werkstofftechnik (2004), Leoben, Österreich

Antrekowitsch H.: Recycling von Verbundwerkstoffen aus Stahl und Nichteisenmetallen: Technische Möglichkeiten und gesetzliche Rahmenbedingungen. Forum für Metallurgie und Werkstofftechnik (2003), Leoben, Österreich

Antrekowitsch H.: Primär- und Sekundärmetallurgie der Nichteisenmetalle unter Berücksichtigung der gesetzlichen Rahmenbedingungen. Nichteisentagung RHI (2003), Wien, Österreich

Antrekowitsch H.: Gas treatment in the secondary metallurgy of nonferrous metals. EMC (2003), Hannover, Deutschland

Antrekowitsch H.: Christian-Doppler-Labor für Sekundärmetallurgie der Nichteisenmetalle. Forschung zwischen Stahl- und Nichteisenmetallurgie. Institutskolloquium (2003)

Antrekowitsch H.: Investigations in different reducing agents for the pyrometallurgical treatment of steel mill dusts. 132th TMS Annual Meeting & Exhibition (2003), San Diego, USA

Antrekowitsch H.: Problemstellungen und Lösungsmöglichkeiten bei der Aufarbeitung von Flugstäuben aus dem Stahlwerksbereich. GDMB, Zinkfachausschuss (2002), Deutschland

Antrekowitsch H.: Sustainable development, Networking in the field of metals recycling. M³ Internat. Congress on European Perspectives in Mining and Metallurgy (2002), Wien, Österreich

Antrekowitsch H.: Metallurgie des Leichtmetallrecyclings bei Altautos unter Berücksichtigung der gesetzlichen Rahmenbedingungen. Recycling in der Automobilindustrie (2002), Leoben, Österreich

Antrekowitsch H.: Recycling of Aluminium and Magnesium Parts from Used Cars: Legislative Frame and Consequences for Metallurgy and Material Design. Environmental Sustainability Conference and Exhibition (2002)

Antrekowitsch H.: Primär- und Sekundärmetallurgie von Aluminium. VRAG Forschung (2001), Leoben, Österreich

Antrekowitsch H.: Feuerfesttechnik in der Aluminium-Industrie. VRAG Forschung (2001), Leoben, Österreich

Antrekowitsch H.: Problemstellungen und Lösungsmöglichkeiten bei der Aufarbeitung von Flugstäuben aus dem Stahlwerksbereich. Zink-Fachausschuss (2001)

Antrekowitsch H.: Vergüten und Aushärten von Stählen und Aluminium. Tyrolia (2001), Wien, Österreich

Antrekowitsch H.: Wärmebehandlung von Aluminium-Legierungen und Stählen. Tyrolia (2001), Wien, Österreich

Antrekowitsch H.: Leichtbaustudie Anwendungen von Aluminium und Magnesium im Fahrzeugbau heute. MAGNA Steyr Engineering „ALUMINIUM und MAGNESIUM” Einsatz im Fahrzeugbau – Experten berichten (2001), Graz, Österreich

Antrekowitsch H.: Schweißtechnische Schäden bei Nichteisenlegierungen (Al). SZA (2001), Wien, Österreich

Posters

Wibner S. und H. Antrekowitsch: Scrap processing in Al recycling. European Metallurgical Conference, Düsseldorf, Deutschland, 2019

Ebner, T., S. Luidold, H. Antrekowitsch, C. Storf and C. Czettl: Phase formation in Co(Ru)-Zn diffusion couples. 19th Plansee Seminar 2017, Reutte, Österreich, 28.05.-02.06.2017

Angerer T., S. Hofer und H. Antrekowitsch: Development of a lead-free brass alloy. EMC, Düsseldorf, Deutschland, 2015

Kolb G. und H. Antrekowitsch: Alloying Elements and Heat Treatment on Wrought 7xxx Aluminium Alloys. EMC, Düsseldorf, Deutschland, 2015

Schlögl C. und H. Antrekowitsch: Anodizing of Recycling Aluminium. EMC, Düsseldorf, Deutschland, 2015

Werinos M., H. Antrekowitsch und S. Pogatscher: Rapid artificial aging of Al-Mg-Si alloys. EMC, Düsseldorf, Deutschland, 2015

Zöhrer M., T. Angerer, H. Antrekowitsch und F. Duspiva: Recycling of aluminium powdered waste. EMC, Düsseldorf, Deutschland, 2015

Pogatscher S. und H. Antrekowitsch: Unterbrochenes Abschrecken (I.Q.) von Al-Mg-Si Legierungen. Forum für Metallurgie und Werkstofftechnik, Leoben, Österreich, 2012

Pogatscher S. und H. Antrekowitsch: Aushärtung in 6xxx-Legierungen. WerWasWo.Forschung@MUL.2012, Leoben, Österreich, 2012

Pogatscher S. und H. Antrekowitsch: Unterbrochenes Abschrecken von AlMgSi-Legierungen. Ranshofener Leichtmetalltage 2012, Gmunden

Hoy C., S. Luidold und H. Antrekowitsch: Secondary raw materials for the production of ferroalloys. EMC, Düsseldorf, Deutschland, 2011

Stadler F., H. Antrekowitsch, W. Fragner, H. Kaufmann und P. Uggowitzer: The effect of Ni on the high-temperature strength of Al-Si cast alloys. EMC, Düsseldorf, Deutschland, 2011

Pogatscher S. und H. Antrekowitsch: Einfluss der Kaltauslagerung auf die Warmauslagerung von AlMgSi-Legierungen. Forum für Metallurgie und Werkstofftechnik, Leoben, Österreich, 2011

Pogatscher S. und H. Antrekowitsch: Effect of prior natural aging on artificial aging of Al-Mg-Si-alloys. EMC, Düsseldorf, Deutschland, 2011

Pogatscher S. und H. Antrekowitsch: Untersuchung des Aushärtungsverhaltens von AlMgSi-Legierungen. Forum für Metallurgie und Werkstofftechnik, Leoben, Österreich, 2010

Hackl A., H. Antrekowitsch und R. Brisberger: Development of Zn-Al-Mg-coatings for continuous hot dip galvanising. EMC, Innsbruck, Österreich, 2009

Pucher P. und H. Antrekowitsch: Effect of compositional variations on the mechanical and fluidity performace of the aluminium cast alloy AlSi9Cu3. EMC, Innsbruck, Österreich, 2009

Ressel R., H. Antrekowitsch und M. Hochenhofer: A neural network for selction of the burden composition at the production of ferromolybdenum. EMC, Innsbruck, Österreich, 2009

Zunko H., A. Hackl, H. Antrekowitsch, R. Ebner und R. Brisberger: Investigation on Cracking Behaviour of new Zn-based Coatings on Sheet Steel for Hot Dip Galvanising. EMC, Innsbruck, Österreich, 2009

Pogatscher S. und H. Antrekowitsch: Oberflächenbeschichtung von Cu-Flachdrähten mit bleifreien Loten. WerWasWo.Forschung@MUL, Leoben, Österreich, 2009

Pogatscher S. und H. Antrekowitsch: Alternative Wärmebehandlungen von 6xxx-Aluminiumlegierungen. WerWasWo.Forschung@MUL, Leoben, Österreich, 2009

Koch S. und H. Antrekowitsch: Impact of Phase Transformation during Homogenisation on Mechanical Properties of AlMgSi-Alloys. EMC, Düsseldorf, Deutschland, 2007

Koch S., H. Antrekowitsch, G. Anger und J. Enser: Investigation of the correlation between homogenisation and tensile properties of AlMgSi-alloys. Forum für Metallurgie und Werkstofftechnik, Leoben, Österreich, 2006

Redl C., B. Matl und H. Antrekowitsch: Mehrphasenströmungssimulation des Tribojet-Zerstäubers. Forum für Metallurgie und Werkstofftechnik, Leoben, Österreich, 2005

Rivera S., T. Messner, J. Pesl und H. Antrekowitsch: Optimization of the Shaft Furnace in the Secondary Copper Industry. Forum für Metallurgie und Werkstofftechnik, Leoben, Österreich, 2005

Messner T., J. Pesl und H. Antrekowitsch: Element distrbution and process optimization at the secondary metallurgy of copper. Forum für Metallurgie und Werkstofftechnik, Leoben, Österreich, 2005

Candic M., T. Messner, J. Pesl und H. Antrekowitsch: Modellierung von Stoff- und Energieströmen unter besonderer Berücksichtigung des Flammofenraffinationsprozesses sowie der Kreislaufströme einer Sekundärkupferhütte. Forum für Metallurgie und Werkstofftechnik, Leoben, Österreich, 2005